CEN ISO/TR 20173:2005

Welding - Grouping systems for materials - American materials (ISO/TR 20173:2005)

This Technical Report provides cross references between the grouping of materials specified in CEN ISO TR 15608 and American standards for materials

Schweißen - Werkstoffgruppeneinteilung - Amerikanische Werkstoffe (ISO/TR 20173:2005)

Dieser Technische Bericht enthält eine amerikanische Gruppeneinteilung von Werkstoffen zum Schweißen, gegliedert nach der Gruppeneinteilung von ISO/TR 15608.
Er kann auch für andere Zwecke wie Wärmebehandlung, Umformen und zerstörungsfreie Prüfung angewendet werden. Gruppeneinteilung für Stähle nach ISO/TR 15608:2005, Tabelle 1.
Dieser Technische Bericht enthält Gruppeneinteilungen für die folgenden genormten Werkstoffe:
-   Stahl;
-   Aluminium und seine Legierungen;
-   Nickel und seine Legierungen;
-   Kupfer und seine Legierungen;
-   Titan und seine Legierungen;
-   Zirkonium und seine Legierungen;
-   Gusseisen.

Soudage - Systèmes de groupement des matériaux - Matériaux américains (ISO/TR 20173:2005)

Varjenje – Razvrščanje ameriških materialov v skupine (ISO/TR 20173:2005)

General Information

• Status: Withdrawn
• Publication Date: 14-Dec-2005
• Withdrawal Date: 30-Sep-2009
• ICS: 25.160.20 - Welding consumables
• Technical Committee: CEN/TC 121 - Welding
• Drafting Committee: CEN/TC 121/SC 1 - Specification and qualification of welding procedures for metallic materials
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 01-Oct-2009
• Completion Date: 01-Oct-2009
• Ref Project: SIST-TP CEN ISO/TR 20173:2006 - Welding - Grouping systems for materials - American materials (ISO/TR 20173:2005)

Relations

• Replaced By: CEN ISO/TR 20173:2009 - Welding - Grouping systems for materials - American materials (ISO/TR 20173:2009)
• Effective Date: 10-Oct-2009

Standards Content (Sample)

SLOVENSKI STANDARD
01-marec-2006
9DUMHQMH±5D]YUãþDQMHDPHULãNLKPDWHULDORYYVNXSLQH,6275
Welding - Grouping systems for materials - American materials (ISO/TR 20173:2005)
Schweißen - Werkstoffgruppeneinteilung - Amerikanische Werkstoffe (ISO/TR
20173:2005)
Soudage - Systemes de groupement des matériaux - Matériaux américains (ISO/TR
20173:2005)
Ta slovenski standard je istoveten z: CEN ISO/TR 20173:2005
ICS:
25.160.20 Potrošni material pri varjenju Welding consumables
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

TECHNICAL REPORT
CEN ISO/TR 20173
RAPPORT TECHNIQUE
TECHNISCHER BERICHT
December 2005
ICS 25.160.20
English Version
Welding - Grouping systems for materials - American materials
(ISO/TR 20173:2005)
Soudage - Systèmes de groupement des matériaux - Scheißen - Werkstoffgruppeneinteilung - Amerikanische
Matériaux américains (ISO/TR 20173:2005) Werkstoffe (ISO/TR 20173:2005)
This Technical Report was approved by CEN on 29 November 2005. It has been drawn up by the Technical Committee CEN/TC 121.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN ISO/TR 20173:2005: E
worldwide for CEN national Members.

Foreword
This document (CEN ISO/TR 20173:2005) has been prepared by Technical Committee
CEN/TC 121 "Welding", the secretariat of which is held by DIN, in collaboration with Technical
Committee ISO/TC 44 "Welding and allied processes".

TECHNICAL ISO/TR
REPORT 20173
First edition
2005-12-15
Welding — Grouping systems for
materials — American materials
Soudage — Systèmes de groupement des matériaux — Matériaux
américains
Reference number
ISO/TR 20173:2005(E)
©
ISO 2005
ISO/TR 20173:2005(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

©  ISO 2005
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
ii © ISO 2005 – All rights reserved

ISO/TR 20173:2005(E)
Contents Page
Foreword. iv
1 Scope. 1
2 American grouping system for materials. 1
Bibliography . 56

ISO/TR 20173:2005(E)
Foreword
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
In exceptional circumstances, when a technical committee has collected data of a different kind from that
which is normally published as an International Standard ("state of the art", for example), it may decide by a
simple majority vote of its participating members to publish a Technical Report. A Technical Report is entirely
informative in nature and does not have to be reviewed until the data it provides are considered to be no
longer valid or useful.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO/TR 20173 was prepared by the European Committee for Standardization (CEN) Technical Committee
CEN/TC 121, Welding, in collaboration with Technical Committee ISO/TC 44, Welding and allied processes,
Subcommittee SC 10, Unification of requirements in the field of metal welding, in accordance with the
Agreement on technical cooperation between ISO and CEN (Vienna Agreement).

iv © ISO 2005 – All rights reserved

TECHNICAL REPORT ISO/TR 20173:2005(E)

Welding — Grouping systems for materials — American
materials
1 Scope
This Technical Report provides an American grouping system for materials for welding purposes, classified in
accordance with the grouping system of ISO/TR 15608.
It may also apply for other purposes, such as heat treatment, forming and non-destructive testing. The types
of steels are in accordance with the grouping system of ISO/TR 15608:2000, Table 1.
This Technical Report covers grouping systems for the following standardized materials:
⎯ steel;
⎯ aluminium and its alloys;
⎯ nickel and its alloys;
⎯ copper and its alloys;
⎯ titanium and its alloys;
⎯ zirconium and its alloys;
⎯ cast irons.
2 American grouping system for materials
See Table 1 for ferrous material and Table 2 for non-ferrous material.
ISO/TR 20173:2005(E)
Table 1 — American grouping system for ferrous material
ASME/
AWS
ASTM/ASME ISO/TR 15608
Type or Grade P, S or UNS number Nominal Composition
Specification number group
M
number
AS 15 5-490 1 — 1,1 C
AS 15 7-430 1 — 1,1 C
AS 15 7-460 1 — 1,1 C
AS 15 7-490 1 — 1,1 C
SA 36 — 1 K02600 11,1 C-Mn-Si
SA 53 Type E,Gr.A 1 K02504 11,1 C
SA 53 Type E,Gr.B 1 K03005 11,1 C-Mn
SA 53 Type F 1 — 11,1 C
SA 53 Type S,Gr.A 1 K02504 11,1 C
SA 53 Type S,Gr.B 1 K03005 11,1 C-Mn
SA 105 — 1 K03504 11,1 C-Si
SA 106 A 1 K02501 1,1 C-Si
SA 106 B 1 K03006 11,1 C-Si
SA 106 C 1 K03501 11,1 C-Si
A 108 1015 CW 1 G10150 1,1 C
A 108 1018 CW 1 G10180 1,1 C
A 108 1020 CW 1 G10200 1,1 C
SA 134 A283 Gr. A 1 — 1,1 C
SA 134 A283 Gr. B 1 — 1,1 C
SA 134 A283 Gr. C 1 K02401 1,1 C
SA 134 A283 Gr. D 1 K02702 1,1 C
SA 134 A285 Gr. A 1 K01700 1,1 C
SA 134 A285 Gr. B 1 K02200 1,1 C
SA 134 A285 Gr. C 1 K02801 11,1 C
SA 135 A 1 — 1,1 C
SA 135 B 1 — 11,1 C
A 139 A 1 — 1,1 C
A 139 B 1 K03003 1,1 C
A 139 C 1 K03004 11,1 C
A 139 D 1 K03010 11,1 C
A 139 E 1 K03012 11,1 C
A 167 Type 301 8 S30100 8,1 17Cr-7Ni
A 167 Type 302 8 S30200 8,1 18Cr-8Ni
2 © ISO 2005 – All rights reserved

ISO/TR 20173:2005(E)
Table 1 (continued)
ASME/
AWS
ASTM/ASME ISO/TR 15608
Type or Grade P, S or UNS number Nominal Composition
Specification number group
M
number
A 167 Type 302B 8 S30215 8,1 18Cr-8Ni-2Si
A 167 Type 304 8 S30400 8,1 18Cr-8Ni
A 167 Type 304L 8 S30403 8,1 18Cr-8Ni
A 167 Type 305 8 S30500 8,1 18Cr-11Ni
A 167 Type 308 8 S30800 8,2 20Cr-10Ni
A 167 Type 309 8 S30900 8,2 23Cr-12Ni
A 167 Type 309S 8 S30908 8,2 23Cr-12Ni
A 167 Type 310 8 S31000 8,2 25Cr-20Ni
A 167 Type 310S 8 S31008 8,2 25Cr-20Ni
A 167 Type 316L 8 S31603 8,1 16Cr-12Ni-2Mo
A 167 Type 317 8 S31700 8,1 18Cr-13Ni-3Mo
A 167 Type 317L 8 S31703 8,1 18Cr-13Ni-3Mo
A 167 Type 321 8 S32100 8,1 18Cr-10Ni-Ti
A 167 Type 347 8 S34700 8,1 18Cr-10Ni-Cb
A 167 Type 348 8 S34800 8,1 18Cr-10Ni-Cb
SA 178 A 1 K01200 1,1 C
SA 178 C 1 K03503 11,1 C
SA 178 D 1 — 11,1 C-Mn-Si
SA 179 — 1 K01200 1,1 C
SA 181 Cl. 60 1 K03502 11,1 C-Si
SA 181 Cl. 70 1 K03502 11,1 C-Si
A 182 F60 10H S32205 10,1 22Cr-5Ni-3Mo-N
A 182 F6a, Cl. 3 6 S41000 7,2 13Cr
A 182 F6a, Cl. 4 6 S41000 7,2 13Cr
A 182 S34565 8 S34565 8,2 24Cr-17Ni-6Mn-4.5Mo-N
SA 182 F1 1 K12822 1,1 C-0.5Mo
SA 182 F11, Cl. 1 4 K11597 5,1 1.25Cr-0.5Mo-Si
SA 182 F11, Cl. 2 4 K11572 5,1 1.25Cr-0.5Mo-Si
SA 182 F11, Cl. 3 4 K11572 5,1 1.25Cr-0.5Mo-Si
SA 182 F12, Cl. 1 4 K11562 5,1 1Cr-0.5Mo
SA 182 F12, Cl. 2 4 K11564 5,1 1Cr-0.5Mo
SA 182 F2 3 K12122 4,1 0.5Cr-0.5Mo
SA 182 F21 5A K31545 5,2 3Cr-1Mo
ISO/TR 20173:2005(E)
Table 1 (continued)
ASME/
AWS
ASTM/ASME ISO/TR 15608
Type or Grade P, S or UNS number Nominal Composition
Specification number group
M
number
SA 182 F22, Cl. 1 5A K21590 5,2 2.25Cr-1Mo
SA 182 F22, Cl. 3 5A K21590 5,2 2.25Cr-1Mo
SA 182 F22V 5A K31835 6,2 2.25Cr-1Mo-V
SA 182 F304 8 S30400 8,1 18Cr-8Ni
SA 182 F304 8 S30400 8,1 18Cr-8Ni
SA 182 F304H 8 S30409 8,1 18Cr-8Ni
SA 182 F304H 8 S30409 8,1 18Cr-8Ni
SA 182 F304L 8 S30403 8,1 18Cr-8Ni
SA 182 F304L 8 S30403 8,1 18Cr-8Ni
SA 182 F304LN 8 S30453 8,1 18Cr-8Ni-N
SA 182 F304LN 8 S30453 8,1 18Cr-8Ni-N
SA 182 F304N 8 S30451 8,1 18Cr-8Ni-N
SA 182 F310 8 S31000 8,2 25Cr-20Ni
SA 182 F310 8 S31000 8,2 25Cr-20Ni
SA 182 F316 8 S31600 8,1 16Cr-12Ni-2Mo
SA 182 F316 8 S31600 8,1 16Cr-12Ni-2Mo
SA 182 F316H 8 S31609 8,1 16Cr-12Ni-2Mo
SA 182 F316H 8 S31609 8,1 16Cr-12Ni-2Mo
SA 182 F316L 8 S31603 8,1 16Cr-12Ni-2Mo
SA 182 F316L 8 S31603 8,1 16Cr-12Ni-2Mo
SA 182 F316LN 8 S31653 8,1 16Cr-12Ni-2Mo-N
SA 182 F316LN 8 S31653 8,1 16Cr-12Ni-2Mo-N
SA 182 F316N 8 S31651 8,1 16Cr-12Ni-2Mo-N
SA 182 F317 8 S31700 8,1 18Cr-13Ni-3Mo
SA 182 F317 8 S31700 8,1 18Cr-13Ni-3Mo
SA 182 F317L 8 S31703 8,1 18Cr-13Ni-3Mo
SA 182 F317L 8 S31703 8,1 18Cr-13Ni-3Mo
SA 182 F321 8 S32100 8,1 18Cr-10Ni-Ti
SA 182 F321 8 S32100 8,1 18Cr-10Ni-Ti
SA 182 F321H 8 S32109 8,1 18Cr-10Ni-Ti
SA 182 F321H 8 S32109 8,1 18Cr-10Ni-Ti
SA 182 F347 8 S34700 8,1 18Cr-10Ni-Cb
SA 182 F347 8 S34700 8,1 18Cr-10Ni-Cb
4 © ISO 2005 – All rights reserved

ISO/TR 20173:2005(E)
Table 1 (continued)
ASME/
AWS
ASTM/ASME ISO/TR 15608
Type or Grade P, S or UNS number Nominal Composition
Specification number group
M
number
SA 182 F347H 8 S34709 8,1 18Cr-10Ni-Cb
SA 182 F347H 8 S34709 8,1 18Cr-10Ni-Cb
SA 182 F348 8 S34800 8,1 18Cr-10Ni-Cb
SA 182 F348 8 S34800 8,1 18Cr-10Ni-Cb
SA 182 F348H 8 S34809 8,1 18Cr-10Ni-Cb
SA 182 F348H 8 S34809 8,1 18Cr-10Ni-Cb
SA 182 F3V 5C K31830 6,2 3Cr-1Mo-V-Ti-B
SA 182 F429 6 S42900 7,2 15Cr
SA 182 F430 7 S43000 7,1 17Cr
SA 182 F44 8 S31254 8,2 20Cr-18Ni-6Mo
SA 182 F45 8 S30815 8,2 21Cr-11Ni-N
SA 182 F46 8 S30600 8,1 18Cr-15Ni-4Si
SA 182 F5 5B K41545 5,3 5Cr-0.5Mo
SA 182 F50 10H S31200 10,2 25Cr-6Ni-Mo-N
SA 182 F51 10H S31803 10,1 22Cr-5Ni-3Mo-N
SA 182 F55 10H S32760 10,1 25Cr-8Ni-3Mo-W-Cu-N
SA 182 F5a 5B K42544 5,3 5Cr-0.5Mo
SA 182 F6a, Cl. 1 6 K91151 7,2 13Cr
SA 182 F6a, Cl. 2 6 K91151 7,2 13Cr
SA 182 F6b 6 S41026 7,2 13Cr-0.5Mo
SA 182 F6NM 6 S41500 7,2 13Cr-4.5Ni-Mo
SA 182 F9 5B K90941 5,4 9Cr-1Mo
SA 182 F91 5B K90901 6,4 9Cr-1Mo-V
SA 182 FR 9A K22035 9,1 2Ni-1Cu
SA 182 FXM-11 8 S21904 8,3 21Cr-6Ni-9Mn
SA 182 FXM-19 8 S20910 8,3 22Cr-13Ni-5Mn
SA 182 FXM-27Cb 10H S44627 7,1 27Cr-1Mo
SA 192 — 1 K01201 1,1 C-Si
SA 199 T11 4 K11597 5,1 1.25Cr-0.5Mo-Si
SA 199 T21 5A K31545 5,2 3Cr-1Mo
SA 199 T22 5A K21590 5,2 2.25Cr-1Mo
SA 199 T4 5A K31509 5,2 2.25Cr-0.5Mo-0.75Si
SA 199 T5 5B K41545 5,3 5Cr-0.5Mo
ISO/TR 20173:2005(E)
Table 1 (continued)
ASME/
AWS
ASTM/ASME ISO/TR 15608
Type or Grade P, S or UNS number Nominal Composition
Specification number group
M
number
SA 199 T9 5B K90941 5,4 9Cr-1Mo
SA 199 T91 5B K90901 6,4 9Cr-1Mo-V
SA 203 A 9A K21703 9,1 2.5Ni
SA 203 B 9A K22103 9,1 2.5Ni
SA 203 D 9B K31718 9,2 3.5Ni
SA 203 E 9B K32018 9,2 3.5Ni
SA 203 F 9B K31718 9,2 3.5Ni
SA 204 A 3 K11820 1,1 C-0.5Mo
SA 204 B 3 K12020 1,1 C-0.5Mo
SA 204 C 3 K12320 1,2 C-0.5Mo
SA 209 T1 3 K11522 1,1 C-0.5Mo
SA 209 T1a 3 K12023 1,1 C-0.5Mo
SA 209 T1b 3 K11422 1,1 C-0.5Mo
SA 210 A-1 1 K02707 11,1 C-Si
SA 210 C 1 K03501 11,1 C-Mn-Si
A 211 A570 Gr 30 1 K02502 1,1 C
A 211 A570 Gr 33 1 K02502 1,
...