iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 12209-1:2000

(Main)

Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Part 1: Yoke type connections (ISO 12209-1:2000)

Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Part 1: Yoke type connections (ISO 12209-1:2000)

This standard specifies the characteristics of the yoke type outlet connections for gas cylinder valves for compressed breathable air cylinders, up to a maximum cylinder working pressure of 230 bar. It states the fundamental requirements for both the connection and its components and includes basic dimensions.

Ortsbewegliche Gasflaschen - Ventilseitenstutzen für Gasflaschenventile für verdichtete Atemluft - Teil 1: Bügelanschluß (ISO 12209-1:2000)

Diese Norm legt wesentliche Eigenschaften für Seitenverbindungen mit Bügelanschluß von Gasflaschenventilen für verdichtete Atemluft bis zu einem max. Arbeitsdruck von 230 bar fest. Sie enthält grundlegende Anforderungen sowohl an die Verbindung wie auch an deren Einzelteile und umfaßt die Grundmaße.

Bouteilles à gaz - Raccords de sortie pour robinets de bouteilles à gaz pour air comprimé respirable - Partie 1: Raccords du type à étrier (ISO 12909-1:2000)

La présente partie de l'ISO 12209 spécifie les caractéristiques des raccords de sortie de type à étrier pour les robinets de bouteilles à gaz pour air comprimé respirable, jusqu'à une pression maximale de travail de la bouteille égale à 230 bar. Elle définit les exigences fondamentales pour le raccord ainsi que pour ses composants et spécifie les dimensions de base. L'annexe A décrit les modes opératoires d'essai de qualification de prototype de raccord de sortie.

Premične plinske jeklenke - Izhodni priključki ventila za jeklenke za stisnjeni dihalni zrak - 1. del: Priključki v obliki prižeme (ISO 12209-1:2000)

General Information

Status
Withdrawn
Publication Date
14-Nov-2000
Withdrawal Date
03-Sep-2013
ICS
23.020.35 - Gas cylinders
23.060.40 - Pressure regulators
Technical Committee
CEN/TC 23 - Transportable gas cylinders
Drafting Committee
CEN/TC 23/SC 2 - Fittings
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
04-Sep-2013
Completion Date
04-Sep-2013
Ref Project
SIST EN ISO 12209-1:2002 - Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Part 1: Yoke type connections (ISO 12209-1:2000)

Relations

Replaced By
EN ISO 12209:2013 - Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air (ISO 12209:2013)
Effective Date
11-Sep-2013
Child
EN ISO 12209-3:2000 - Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Part 3: Adaptor for 230 bar valves (ISO 12209-3:2000)
Effective Date
22-Dec-2008
Child
EN ISO 12209-2:2000 - Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Part 2: Threaded connections (ISO 12209-2:2000)
Effective Date
22-Dec-2008

Buy Standard

EN ISO 12209-1:2002EN ISO 12209-1:2002
PreviousNext
Standard
EN ISO 12209-1:2002
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-maj-2002
3UHPLþQHSOLQVNHMHNOHQNH,]KRGQLSULNOMXþNLYHQWLOD]DMHNOHQNH]DVWLVQMHQL
GLKDOQL]UDNGHO3ULNOMXþNLYREOLNLSULåHPH ,62
Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air
- Part 1: Yoke type connections (ISO 12209-1:2000)
Ortsbewegliche Gasflaschen - Ventilseitenstutzen für Gasflaschenventile für verdichtete
Atemluft - Teil 1: Bügelanschluß (ISO 12209-1:2000)
Bouteilles a gaz - Raccords de sortie pour robinets de bouteilles a gaz pour air comprimé
respirable - Partie 1: Raccords du type a étrier (ISO 12909-1:2000)
Ta slovenski standard je istoveten z: EN ISO 12209-1:2000
ICS:
23.020.30 7ODþQHSRVRGHSOLQVNH Pressure vessels, gas
MHNOHQNH cylinders
23.060.40 7ODþQLUHJXODWRUML Pressure regulators
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

------------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 17871:2020/A1:2024(Amendment)
Gas cylinders - Quick-release cylinder valves - Specification and type testing - Amendment 1 (ISO 17871:2020/Amd 1:2024)
SIST EN ISO 17871:2020/A1:2024

No scope available

  • Amendment
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 10297:2024(Main)
Gas cylinders - Cylinder valves - Specification and type testing (ISO 10297:2024, Corrected version 2024-05)
SIST EN ISO 10297:2024

This document specifies design, type testing and marking requirements for:
a)       cylinder valves intended to be fitted to refillable transportable gas cylinders;
b)       main valves (excluding ball valves) for bundles of cylinders;
c)        cylinder valves or main valves with integrated pressure regulator (VIPR);
NOTE 1        This includes the following specific VIPR designs where:
1)  The pressure regulating system is acting as the primary valve operating mechanism (VIPR type B). This also includes designs where closure of the primary valve operating mechanism is obtained by closing the seat of the pressure regulating mechanism.
2)  The primary valve operating mechanism is located at the low-pressure side of the pressure regulating system (VIPR type C).
d)       valves for pressure drums and tubes;
which convey compressed, liquefied or dissolved gases.
NOTE 2        Where there is no risk of ambiguity, cylinder valves, main valves, VIPRs and valves for pressure drums and tubes are addressed with the collective term “valves” within this document.
This document does not apply to
—     valves for cryogenic equipment, portable fire extinguishers and liquefied petroleum gas (LPG);
—     quick-release cylinder valves (e.g. for fire-extinguishing, explosion protection and rescue applications) - requirements for quick-release cylinder valves are specified in ISO 17871 which contains normative references to this document;
—     self-closing cylinder valves and ball valves.
NOTE 3        Requirements for valves for cryogenic vessels are specified in ISO 21011 and at a regional level, e.g. in EN 1626. Requirements for LPG valves are specified in ISO 14245 or ISO 15995. Requirements for self-closing cylinder valves are specified in ISO 17879. Requirements for ball valves are specified in ISO 23826. Requirements for valves for portable fire extinguishers at a regional level are specified, for example, in the EN 3 series.
This document only covers the function of a valve as a closure. Other functions that are possibly integrated in the valve can be covered by other standards. Such standards do however not constitute requirements according to this document.
NOTE 4        Definition of and specific requirements for VIPRs in addition to those that are given in this document are specified in ISO 22435 for industrial applications or ISO 10524-3 for medical applications. Similarly, certain specific requirements for residual pressure valves (RPV) with or without a non-return function in addition to those that are given in this document are given in ISO 15996.
NOTE 5        Certain specific requirements for valves for breathing apparatus in addition to those that are given in this document are specified at a regional level, for example, in the EN 144 series. Certain specific requirements for quick-release valves for fixed fire-fighting systems in addition to those that are given in this document are specified in ISO 16003 and at a regional level, for example, in EN 12094–4.
NOTE 6        Requirements for manufacturing tests and examinations of valves covered by this document are given in ISO 14246.

  • Standard
    69 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 22435:2024(Main)
Gas cylinders - Cylinder valves with integrated pressure regulators - Specification and type testing (ISO 22435:2024)
SIST EN ISO 22435:2024

This document specifies design, type test methods, marking and instruction requirements for cylinder valves with integrated pressure regulators (VIPRs) intended to be fitted to gas cylinders, pressure drums or tubes or used as a main valve for bundles of cylinders that convey compressed, liquefied or dissolved gases.
These are requirements for VIPRs that are in addition to those given in the relevant closure standard, for example, in ISO 10297 for cylinder valves, in ISO 17871 for quick-release cylinder valves, in ISO 17879 for self-closing cylinder valves or in ISO 23826 for ball valves. For ISO 17871, these requirements are only applicable to quick-release cylinder valves types B, C, D and E.
NOTE 1        If the pressure regulating system of a VIPR is acting as the primary valve operating mechanism, it is covered by the relevant closure standard, e.g. ISO 10297, ISO 17871, ISO 17879 and ISO 23826. This also includes designs where closure of the primary valve operating mechanism of a VIPR is obtained by closing the seat of the pressure regulating system.
NOTE 2        If the primary valve operating mechanism of a VIPR is located at the low-pressure side of the pressure regulating system, it is covered by the relevant closure standard, e.g. ISO 10297, ISO 17871, ISO 17879 and ISO 23826.
NOTE 3        The term “pressure receptacle” is used within this document to cover instances where no differentiation is necessary between gas cylinders, bundles of cylinders, pressure drums and tubes.
This document does not apply to VIPRs for
a)       medical applications (see ISO 10524-3);
b)       liquefied petroleum gas (LPG);
c)        cryogenic applications.
NOTE 4        Additional requirements for a VIPR with a residual pressure device (RPD) are specified in ISO 15996.
NOTE 5        Additional requirements for pressure relief valves can exist in international/regional regulations/ standards.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 17871:2020(Main)
Gas cylinders - Quick-release cylinder valves - Specification and type testing (ISO 17871:2020)
SIST EN ISO 17871:2020

This document, in conjunction with ISO 10297 and ISO 14246, specifies design, type testing, marking and manufacturing tests, and examinations requirements for quick-release cylinder valves intended to be fitted to refillable transportable gas cylinders, pressure drums and tubes which convey:
—     non-toxic;
—     non-oxidizing;
—     non-flammable; and
—     non-corrosive;
compressed or liquefied gases or extinguishing agents charged with compressed gases to be used for fire-extinguishing, explosion protection, and rescue applications.
NOTE 1  The main application of such quick-release cylinder valves is in the fire-fighting industry. However, there are other applications such as avalanche airbags, life raft inflation and similar applications.
NOTE 2  Where there is no risk of ambiguity, gas cylinders, pressure drums and tubes are addressed with the collective term "cylinders" within this document.
This document covers the function of a quick-release cylinder valve as a closure.
This document does not apply to quick-release cylinder valves for cryogenic equipment and for liquefied petroleum gas (LPG).
This document does not apply to quick-release cylinder valves if used as the main closure of portable fire extinguishers because portable fire extinguishers are not covered by transport regulation.
Quick-release cylinder valves of auxiliary refillable propellant gas cylinders used within or as part of portable fire extinguishers are covered by this document, if these cylinders are transported separately, e.g. for filling (see UN Model Regulations, Chapter 3.3, Special Provision 225, second note[1]).

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 15996:2017(Main)
Gas cylinders - Residual pressure valves - Specification and type testing of cylinder valves incorporating residual pressure devices (ISO 15996:2017)
SIST EN ISO 15996:2018

ISO 15996:2017 specifies design, type testing and marking requirements for cylinder valves incorporating residual pressure devices, hereinafter referred to as residual pressure valves (RPVs). This document applies to the following types of RPVs:
a)    cylinder valves intended to be fitted to refillable transportable gas cylinders;
b)    main valves (excluding ball valves) for cylinder bundles;
c)    cylinder valves or main valves with integrated pressure regulator (VIPR);
d)    valves for pressure drums and tubes;
which convey compressed or liquefied gases.
NOTE          Where there is no risk of ambiguity, cylinders, pressure drums, tubes and cylinder bundles are addressed with the collective term "cylinder" within this document.
These requirements are in addition to those in ISO 10297.
For RPD stand-alone devices this document can also be applied.
ISO 15996:2017 does not apply to RPVs for portable fire extinguishers, cryogenic equipment, low pressure refrigerant gases (cylinder test pressure less than 50 bar), dissolved gases or liquefied petroleum gas (LPG).

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 17879:2017(Main)
Gas cylinders - Self-closing cylinder valves - Specification and type testing (ISO 17879:2017)
SIST EN ISO 17879:2018

ISO 17879:2017 specifies the design, type testing, marking and manufacturing tests and examinations requirements for self-closing cylinder valves intended to be fitted to refillable transportable gas cylinders which convey compressed, liquefied or dissolved gases.
NOTE 1       The main applications for such self-closing cylinder valves are in the calibration gas and beverage industries.
ISO 17879:2017 covers the function of a self-closing cylinder valve as a closure.
NOTE 2       Requirements for standard cylinder valves are given in ISO 10297. Requirements for quick-release cylinder valves are given in ISO 17871.
ISO 17879:2017 is not applicable to self-closing cylinder valves for cryogenic equipment, for portable fire extinguishers, or for liquefied petroleum gas (LPG).
NOTE 3       Requirements for valves for cryogenic vessels are specified in ISO 21011 and at a regional level, for example, in EN 1626. Requirements for valves for portable fire extinguishers at a regional level are specified, for example, in EN 3 series. Requirements for self-closing LPG cylinder valves are specified in ISO 14245.
NOTE 4       Additional requirements for pressure-relief devices might be specified in international/regional regulations/standards.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11114-4:2017(Main)
Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 4: Test methods for selecting steels resistant to hydrogen embrittlement (ISO 11114-4:2017)
SIST EN ISO 11114-4:2017

ISO 11114-4: 2017 specifies test methods and the evaluation of results from these tests in order to qualify steels suitable for use in the manufacture of gas cylinders (up to 3 000 l) for hydrogen and hydrogen bearing embrittling gases.
This document only applies to seamless steel gas cylinders.
The requirements of this document are not applicable if at least one of the following conditions for the intended gas service is fulfilled:
-      the working pressure of the filled embrittling gas is less than 20 % of the test pressure of the cylinder;
-      the partial pressure of the filled embrittling gas of a gas mixture is less than 5 MPa (50 bar) in the case of hydrogen and other embrittling gases, with the exception of hydrogen sulphide and methyl mercaptan; in such cases, the partial pressure shall not exceed 0,25 MPa (2,5 bar).
NOTE       In such cases, it is possible to design the cylinder as for ordinary (non-embrittling) gases.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 12209:2013/A1:2016(Amendment)
Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Amendment 1: Outlet connection up to a maximum cylinder working pressure of 500 bar (ISO 12209:2013/Amd 1:2016, Corrected version 2017-03)
SIST EN ISO 12209:2013/A1:2017
  • Amendment
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 13341:2010/A1:2015(Amendment)
Gas cylinders - Fitting of valves to gas cylinders - Amendment 1 (ISO 13341:2010/Amd 1:2015)
SIST EN ISO 13341:2011/A1:2015

2014-04-17 GVN: Draft for // vote received in ISO/CS (see notification of 2014-04-10 in dataservice).
2013-02-22 EMA: Draft for // ENQ received in ISO/CS (see notification of 2013-02-22 in dataservice).

  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    5 pages
    German language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 12209:2013(Main)
Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air (ISO 12209:2013)
SIST EN ISO 12209:2013

ISO 12209:2013 specifies the characteristics of outlet connections for gas cylinder valves for compressed breathable air gas cylinders. It states the fundamental requirements for both; the connection and its components and includes basic dimensions. Included in ISO 12209:2013 the following connections:
a) yoke type outlet connection for SCUBA use up to a maximum cylinder working pressure of 232 bar;
b) threaded type outlet connections up to a maximum cylinder working pressure of 232 bar and 300 bar; and
c) threaded type outlet connection for SCUBA use up to a maximum cylinder working pressure of 232 bar including adaptor for users to convert into a yoke type outlet.
Annex A gives the outlet connection type test procedures.
Requirements for cylinder valves (see ISO 10297) are not covered by ISO 12209:2013.
Requirements for material specifications and gas/material compatibility (see ISO 11114‑1 and ISO 11114‑2) are not covered by ISO 12209:2013.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day