iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 12101-10:2005/AC:2007

(Corrigendum)

Smoke and heat control systems - Part 10: Power supplies

Smoke and heat control systems - Part 10: Power supplies

TC - Modification to 5.2.5.2 and 5.2.5.3

Rauch- und Wärmefreihaltung - Teil 10: Energieversorgung

Systèmes pour le contrôle des fumées et de la chaleur - Partie 10 : Equipement d'alimentation en énergie

Sistemi za nadzor dima in toplote – 10. del: Oskrba z energijo - Popravek AC

General Information

Status
Published
Publication Date
23-Jan-2007
ICS
13.220.99 - Other standards related to protection against fire
Technical Committee
CEN/TC 191 - Fixed firefighting systems
Drafting Committee
CEN/TC 191/SC 1/WG 7 - Power supplies
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
24-Jan-2007
Completion Date
24-Jan-2007
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
89/106/EEC - Construction products
Mandate
M/109 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on fire alarm/detection, fixed firefighting, fire and smoke control and explosion suppression products
Ref Project
SIST EN 12101-10:2005/AC:2007 - Smoke and heat control systems - Part 10: Power supplies

Relations

Corrects
EN 12101-10:2005 - Smoke and heat control systems - Part 10: Power supplies
Effective Date
22-Dec-2008

Buy Standard

EN 12101-10:2005/AC:2007EN 12101-10:2005/AC:2007
PreviousNext
Corrigendum
EN 12101-10:2005/AC:2007
English, French and German language
2 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Smoke and heat control systems - Part 10: Power suppliesSistemi za nadzor dima in toplote – 10. del: Oskrba z energijo - Popravek ACSystemes pour le contrôle des fumées et de la chaleur - Partie 10 : Equipement d'alimentation en énergieRauch- und Wärmefreihaltung - Teil 10: EnergieversorgungTa slovenski standard je istoveten z:EN 12101-10:2005/AC:2007SIST EN 12101-10:2005/AC:2007en,fr,de13.220.20Fire protectionICS:SLOVENSKI
STANDARDSIST EN 12101-10:2005/AC:200701-julij-2007

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12101-10:2005/ACJanuary 2007Janvier 2007Januar 2007ICS 13.220.99English versionVersion FrançaiseDeutsche FassungSmoke and heat control systems - Part 10: Power suppliesSystèmes pour le contrôle des fumées etde la chaleur - Partie 10 : Equipementd'alimentation en énergieRauch- und Wärmefreihaltung - Teil 10:EnergieversorgungThis corrigendum becomes effective on 24 January 2007 for incorporation in the three officiallanguage versions of the EN.Ce corrigendum prendra effet le 24 janvier 2007 pour incorporation dans les trois versionslinguistiques officielles de la EN.Die Berichtigung tritt am 24.Januar 2007 zur Einarbeitung in die drei offiziellen Sprachfassungen derEN in Kraft.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2007 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members.Tous droits d'exploitation sous quelque forme et de quelque manière que ce soit réservés dans le monde en
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
CEN/TS 12101-11:2022(Main)
Smoke and heat control systems - Part 11: Horizontal flow powered ventilation systems for enclosed car parks
SIST-TS CEN/TS 12101-11:2022

This document gives minimum design, installation and commissioning requirements for powered smoke and heat control systems for enclosed car parks using horizontal flow powered ventilation, with or without sprinkler protection, on one or more levels, for cars and light commercial vehicles (max 3,5 t), to reach the design objectives outlined in this document .
This document is applicable for car parks with vehicles powered by petrol, diesel, electricity, CNG or LPG.
NOTE 1   For the purpose of this document for smoke ventilation systems, it is assumed that cars powered by electricity, CNG (compressed natural gas) or LPG (liquefied petroleum gas) will have similar HRR to vehicles powered by petrol or diesel.
NOTE 2   Cars powered by hydrogen are not covered by this document.
This document only covers traditional car parks that are with cars parked alongside each other, with common car access lanes. It does not cover other forms of car parking systems, such as stacking systems.
This document does not cover requirements for day‐to‐day ventilation.
Any other risks than fire from cars are not covered by this document.

  • Technical specification
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12101-6:2022(Main)
Smoke and heat control systems - Part 6: Specification for pressure differential systems - Kits
SIST EN 12101-6:2022

This document applies to pressure differential system kits and components, positioned on the market and intended to operate as part of a pressure differential system. The purpose of a pressure differential system is to prevent protected spaces from smoke spread by using pressure difference and airflow. This document specifies characteristics and test methods for components and kits for pressure differential systems to produce and control the required pressure differential and airflow between protected and unprotected space.

  • Standard
    65 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12101-13:2022(Main)
Smoke and heat control systems - Part 13: Pressure differential systems (PDS) - Design and calculation methods, installation, acceptance testing, routine testing and maintenance
SIST EN 12101-13:2022

This document gives calculation methods, guidance and requirements for the design, installation, acceptance testing, routine testing and maintenance for pressure differential systems (PDS).
PDSs are designed to hold back smoke at a leaky physical barrier in a building, such as a door (either open or closed) or other similarly restricted openings and to keep tenable conditions in escape and access routes depending on the application.
It covers systems intended to protect means of escape e.g. staircases, corridors, lobbies, as well as systems intended to provide a protected firefighting space (bridgehead) for the fire services.
It provides details on the critical features and relevant procedures for the installation.
It describes the commissioning procedures and acceptance testing criteria required to confirm that the calculated design is achieved in the building.
This document gives rules, requirements and procedures to design PDS for buildings up to 60 m.
For buildings taller than 60 m the same requirements are given (e.g. Table 1), but additional methods of calculation and verification are necessary. Requirements for such methods and verification are given in Annex D, but the methods fall outside the scope of this document [e.g. Additional mathematical analysis and/or Computational Fluid Dynamics (CFD)].
Routine testing and maintenance requirements are also defined in this document.
In the absence of national requirements and under expected ambient and outside conditions, the requirements in Table 1 are fulfilled by the PDS.

  • Standard
    118 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12101-2:2017(Main)
Smoke and heat control systems - Part 2: Natural smoke and heat exhaust ventilators
SIST EN 12101-2:2017

This European Standard applies to natural smoke and heat exhaust ventilators (NSHEV) operating as part of smoke and heat exhaust systems (NSHEVS), placed on the market. This standard specifies requirements and gives test methods for natural smoke and heat exhaust ventilators which are intended to be installed in smoke and heat control systems in buildings.

  • Standard
    88 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12101-3:2015(Main)
Smoke and heat control systems - Part 3: Specification for powered smoke and heat control ventilators (Fans)
SIST EN 12101-3:2015

This European Standard specifies the products characteristics of powered smoke and heat control ventilators (fans) intended to be used as part of a powered smoke and heat control ventilation system in construction works.
It provides test and assessment methods of the characteristics and the compliance criteria of the test assessment results.
This European Standard applies to the following:
a)   fans for smoke and heat control ventilation;
b)   impulse/jet fans for smoke and heat control ventilation;

  • Standard
    100 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12101-7:2011(Main)
Smoke and heat control systems - Part 7: Smoke duct sections
SIST EN 12101-7:2011

This European Standard applies to smoke control duct sections, placed on the market and intended to operate as part of a pressure differential system or smoke and heat exhaust system. This standard specifies requirements and gives reference to the test methods defined for smoke control duct sections and their associated components (for example, hangers and other items proven at the time of testing), which are intended to be installed in such systems in buildings. It also provides for the evaluation of conformity of the products to the requirements of this standard. Furthermore, marking and information on installation and maintenance of these products are also given in this European Standard.
To avoid duplication, reference is made to a variety of other standards. To this end, this standard is to be read in conjunction with EN 1366-8, EN 1366-9 and EN 1366-1, for details of the fire resistance testing and EN 13501-4 for corresponding classification.
This standard has not considered in detail the detrimental and/or corrosive effects that may be caused by process chemicals present in the atmosphere, which are drawn through the system intentionally or inadvertently.
This European Standard also governs associated components used together with smoke control duct sections such as turning vanes and silencers, with the exception of natural and powered smoke ventilators and smoke control dampers, which are covered by separate standards.
Ducts for use other than in smoke and heat exhaust/control systems are not covered by this standard.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12101-8:2011(Main)
Smoke and heat control systems - Part 8: Smoke control dampers
SIST EN 12101-8:2011

This European Standard applies to smoke control dampers, placed on the market and intended to operate as part of a pressure differential system or smoke and heat control system. This standard specifies requirements and gives reference to the test methods defined for smoke control dampers and their associated components, such as actuators which are intended to be installed in such systems in buildings. It also provides for the evaluation of conformity of these products to the requirements of this standard. Furthermore, provision on marking and information on installation and maintenance of these products are also given.
This European Standard distinguish between two categories of smoke control dampers, i.e. single compartment smoke control dampers and multi-compartment fire resisting smoke control dampers.
Smoke control dampers covered by this European Standard can be installed into smoke control system ducts or onto the ducts´ surface. They can be installed also into a wall, floor or ceiling/roof elements or onto the surface of these elements.
To avoid duplication, reference is made to a variety of other standards. To this end, this standard is to be read in conjunction with EN 13501-4, prEN 1366-10 and EN 1366-2, for details of the furnace testing.
This standard does not consider in detail the detrimental and/or corrosive effects that may be caused by process chemicals present in the atmosphere, which are drawn through the system intentionally or inadvertently.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 12101-4:2009(Main)
Smoke and heat control systems - Part 4: Installed SHEVS systems for smoke and heat ventilation
SIST-TP CEN/TR 12101-4:2009

This Technical Report applies to SHEVS when installed in a building. This Technical Report specifies the ability of the system to meet the required performances of the SHEVS as specified by the design of the system. This Technical Report is to help to translate the detailed engineering plan into an installed system, but it does not state how the design is made. This Technical Report also covers requirements for components and compatibility between components to ensure that the requirements on the installed system will be met. This Technical report includes requirements for the assembly, installation, commissioning, function testing, maintenance, periodic servicing and routine testing of SHEVS.

  • Technical report
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 12101-5:2005(Main)
Smoke and heat control systems - Part 5: Guidelines on functional recommendations and calculation methods for smoke and heat exhaust ventilation systems
SIST-TP CEN/TR 12101-5:2005

This Technical Report gives recommendations and guidance on functional and calculation methods for smoke and heat exhaust ventilation systems for steady-state design fires. It is intended for a variety of building types and applications, including single-storey buildings, mezzanine floors, warehouses with palletized or racked storage, shopping malls, atria and complex buildings, car parks, places of entertainment and public assembly and un-compartmented space within multi-storey buildings.
This Technical Report does not include any functional recommendations for design parameters where the primary purpose of the SHEVS is to assist fire-fighting.
NOTE   Such functional recommendations need to be agreed with the fire service responsible for the building in question. The calculation procedures set out in the annexes of this Technical Report can be used to design the SHEVS to meet whatever recommendations have been agreed.
This Technical Report does not cover the following:
-   smoke clearance, where smoke is exhausted from a building after the fire has been suppressed;
-   cross-ventilation, where wind-induced or fan-induced air currents sweep smoke through and out of the building, usually as part of fire-fighting operational procedures;
-   ventilation of stairwells, which usually represents a special application of smoke clearance and which does not necessarily protect the continued use of the stairwell;
-   fully-involved fires.

  • Technical report
    97 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12101-10:2005(Main)
Smoke and heat control systems - Part 10: Power supplies
SIST EN 12101-10:2005

This European Standard specifies requirements and gives test methods for primary and secondary electrical and pneumatic power supply equipment, designed for use in smoke and heat control systems in buildings. It also provides for the evaluation of conformity of such equipment to the requirements of this European Standard.
NOTE   A summary of functions is given in Annex A.

  • Standard
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day