iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 374-1:2016/A1:2018

(Amendment)

Protective gloves against dangerous chemicals and micro-organisms - Part 1: Terminology and performance requirements for chemical risks - Amendment 1 (ISO 374-1:2016/Amd 1:2018)

Protective gloves against dangerous chemicals and micro-organisms - Part 1: Terminology and performance requirements for chemical risks - Amendment 1 (ISO 374-1:2016/Amd 1:2018)

2021-01-12-JO-Formal Objection for the OJEU citation in support of the PPE Regulation

Schutzhandschuhe gegen gefährliche Chemikalien und Mikroorganismen - Teil 1: Terminologie und Leistungsanforderungen für chemische Risiken - Änderung 1 (ISO 374-1:2016/Amd 1:2018)

Gants de protection contre les produits chimiques dangereux et les micro-organismes - Partie 1: Terminologie et exigences de performance pour les risques chimiques - Amendement 1 (ISO 374-1:2016/Amd 1:2018)

Varovalne rokavice za zaščito pred nevarnimi kemikalijami in mikroorganizmi - 1. del: Izrazje in zahtevane lastnosti za zaščito pred kemičnimi tveganji - Dopolnilo A1 (ISO 374-1:2016/Amd 1:2018)

General Information

Status
Published
Publication Date
24-Jul-2018
Withdrawal Date
30-Jan-2019
ICS
13.340.40 - Hand and arm protection
Technical Committee
CEN/TC 162 - Protective clothing including hand and arm protection and lifejackets
Drafting Committee
CEN/TC 162/WG 8 - Protective gloves
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
25-Jul-2018
Due Date
03-Feb-2020
Completion Date
25-Jul-2018
Directive
2016/425 - Regulation (EU) 2016/425 of the European Parliament and of the Council of 9 March 2016 on personal protective equipment and repealing Council Directive 89/686/EEC
89/656/EEC - Minimum safety and health requirements for the use by workers of personal protective equipment at the workplace
Mandate
M/031 - Standardization mandate to CEN/CENELEC concerning standards for Personal Protective Equipment
Ref Project
SIST EN ISO 374-1:2017/A1:2018 - Protective gloves against dangerous chemicals and micro-organisms - Part 1: Terminology and performance requirements for chemical risks - Amendment 1 (ISO 374-1:2016/Amd 1:2018)

Relations

Amends
EN ISO 374-1:2016 - Protective gloves against dangerous chemicals and micro-organisms - Part 1: Terminology and performance requirements for chemical risks (ISO 374-1:2016)
Effective Date
30-Aug-2017
Revised
FprEN ISO 374-1 - Protective gloves against dangerous chemicals and micro-organisms - Part 1: Terminology and performance requirements for chemical risks (ISO/FDIS 374-1:2024)
Effective Date
18-Jan-2023

Buy Standard

EN ISO 374-1:2017/A1:2018EN ISO 374-1:2017/A1:2018
PreviousNext
Amendment
EN ISO 374-1:2017/A1:2018
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 374-1:2017/A1:2018
01-november-2018
9DURYDOQHURNDYLFH]D]DãþLWRSUHGQHYDUQLPLNHPLNDOLMDPLLQPLNURRUJDQL]PL
GHO,]UD]MHLQ]DKWHYDQHODVWQRVWL]D]DãþLWRSUHGNHPLþQLPLWYHJDQML'RSROQLOR
$ ,62$PG
Protective gloves against dangerous chemicals and micro-organisms - Part 1:
Terminology and performance requirements for chemical risks - Amendment 1 (ISO 374-
1:2016/Amd 1:2018)
Schutzhandschuhe gegen gefährliche Chemikalien und Mikroorganismen - Teil 1:
Terminologie und Leistungsanforderungen für chemische Risiken - Änderung 1 (ISO 374
-1:2016/Amd 1:2018)
Gants de protection contre les produits chimiques dangereux et les micro-organismes -
Partie 1: Terminologie et exigences de performance pour les risques chimiques -
Amendement 1 (ISO 374-1:2016/Amd 1:2018)
Ta slovenski standard je istoveten z: EN ISO 374-1:2016/A1:2018
ICS:
01.040.13 Okolje. Varovanje zdravja. Environment. Health
Varnost (Slovarji) protection. Safety
(Vocabularies)
13.340.40 Varovanje dlani in rok Hand and arm protection
SIST EN ISO 374-1:2017/A1:2018 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 374-1:2017/A1:2018

---------------------- Page: 2 ----------------------

SIST EN ISO 374-1:2017/A1:2018


EN ISO 374-1:2016/A1
EUROPEAN STANDARD

NORME EUROPÉENNE

July 2018
EUROPÄISCHE NORM
ICS 13.340.40
English Version

Protective gloves against dangerous chemicals and micro-
organisms - Part 1: Terminology and performance
requirements for chemical risks - Amendment 1 (ISO 374-
1:2016/Amd 1:2018)
Gants de protection contre les produits chimiques Schutzhandschuhe gegen gefährliche Chemikalien und
dangereux et les micro-organismes - Partie 1: Mikroorganismen - Teil 1: Terminologie und
Terminologie et exigences de performance pour les Leistungsanforderungen für chemische Risiken -
risques chimiques - Amendement 1 (ISO 374- Änderung 1 (ISO 374-1:2016/Amd 1:2018)
1:2016/Amd 1:2018)
This amendment A1 modifies the European Standard EN ISO 374-1:2016; it was approved by CEN on 20 July 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 374-1:2016/A1:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 374-1:2017/A1:2018
EN ISO 374-1:2016/A1:2018 (E)
Contents Page
European foreword . 3
2

---------------------- Page: 4 ----------------------

SIST EN ISO 374-1:2017/A1:2018
EN ISO 374-1:2016/A1:2018 (E)
European foreword
This document (EN ISO 374-1:2016/A1:2018) has been prepared by Technical Committee ISO/TC 94
“Personal safety - Protective clothing and equipment” in collaboration with Technical Committee
CEN/TC 162 “Protective clothing including hand and arm protection and lifejackets” the secretariat of
which is held by DIN.
This Amendment to the European Standard EN ISO 374-1:2016 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by January 2019, and
conflicting national standards shall be withdrawn at the latest by January 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
Europ
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
CEN ISO/TR 8546:2022(Main)
Hand protection - Guidance for selection and use (ISO/TR 8546:2022)
SIST-TP CEN ISO/TR 8546:2022

This document gives information on the selection and use of personal protective equipment for the hand protection.
The application of this document requires that the risk assessment has been carried out and the hazards have been minimized accordingly through substitution and technical and organizational measures.
On this basis, this document contains information that supports employers in counteracting certain risks to hands that could not be sufficiently reduced by substitution and technical and organizational measures by selecting and using suitable protective gloves.
This document provides explanations on selection, usage and training applicable to protective gloves. The explanations concerning specific hazards are provided in annexes.
This guidance considers the following risks:
    mechanical, (see Annex A);
    chemical, (see Annex B);-    biological, (see Annex C);    thermal, (see Annex D and E);
    electrostatic discharge (see Annex F);
    ionizing radiation and radioactive contamination (see Annex G).
This guidance does not cover other risks, because pertinent international or national publications are available or because the relevant information was not available in ISO/TC 94/SC 13/WG 8. Risks not covered include e.g.:
    cuts and stabs by hand knives;
    use of chain saws (covered by ISO 11393-4:2018, Annex A);
    animal bites;
    needlesticks;
    electrocution;
    optical radiation;
    vibrations;
    electric fault arcs;
    firefighting (covered by ISO/TR 21808);
    sport.

  • Technical report
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 407:2020(Main)
Protective gloves and other hand protective equipments against thermal risks (heat and/or fire)
SIST EN 407:2020

This document specifies requirements, test methods, marking and information for protective gloves and other hand protective equipment’s against thermal risks for professional use, consumer, domestic use.
This document is also applicable to arm protective equipment.
It is used for all gloves and other hand protective equipment’s which protect the hands or part of the hand against heat and/or fire in one or more of the following forms: flame, contact heat, convective heat, radiant heat, small splashes or large quantities of molten metal.
This standarddocument is only applicable in conjunction with EN ISO 21420:2020.
This document doesn’tdoes not apply to gloves for fire-fighters or welding that have their own standards.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 20320:2020(Main)
Protective clothing for use in Snowboarding - Wrist Protectors - Requirements and test methods (ISO 20320:2020)
SIST EN ISO 20320:2020

This document specifies the requirements and test methods for ergonomics, innocuousness, comfort/sizing, restraint, ability to limit wrist extension and attenuate impact force on the palm as well as provisions for marking and instructions supplied by the manufacturer for wrist protectors for all users of snowboard equipment.
It does not apply to protectors used in roller sports, alpine skiing, or other sports. This document does not address protection for the forearm due to axial forces caused by an impact on the fingers or fist. Moreover, this document does not address protection against palmar flexion (terminal flexion) caused by an impact on the dorsal side of the hand.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 21420:2020(Main)
Protective gloves - General requirements and test methods (ISO 21420:2020)
SIST EN ISO 21420:2020

This document specifies the general requirements and relevant test procedures for glove design and construction, innocuousness, comfort and efficiency, as well as the marking and information supplied by the manufacturer applicable to all protective gloves.
It can also apply to arm protectors and gloves permanently incorporated in containment enclosures.
Gloves and hand protectors such as mittens, pot holders and arm protection are covered by this document.
This document does not address the protective properties of gloves and therefore is not used alone but only in combination with the appropriate specific standard(s). A non-exhaustive list of these standards is given in the Bibliography.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 374-4:2019(Main)
Protective gloves against dangerous chemicals and micro-organisms - Part 4: Determination of resistance to degradation by chemicals (ISO 374-4:2019)
SIST EN ISO 374-4:2020

This document specifies the test method for the determination of the resistance of protective glove materials to degradation by dangerous chemicals with continuous contact.
NOTE       Annex A gives information on interlaboratory test results on this method.
It is preferable that other tests used in addition to the evaluation of chemical resistance such as permeation resistance and penetration, as the chemical test do not provide sufficient information on the physical property changes affecting a glove during exposure to a chemical. It is necessary that the outside surface of the glove be exposed to the chemical.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 374-2:2019(Main)
Protective gloves against dangerous chemicals and micro-organisms - Part 2: Determination of resistance to penetration (ISO 374-2:2019)
SIST EN ISO 374-2:2020

This document specifies a test method for the penetration resistance of gloves that protect against dangerous chemicals and/or micro-organisms.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11393-4:2019(Main)
Protective clothing for users of hand-held chainsaws - Part 4: Performance requirements and test methods for protective gloves (ISO 11393-4:2018)
SIST EN ISO 11393-4:2019

This document specifies the performance requirements, test methods, design requirements, identification and marking information for gloves that offer protection against cutting by hand-held chainsaws.
Guidance on chainsaw use and the selection of gloves is given in Annex A.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 388:2016+A1:2018(Main)
Protective gloves against mechanical risks
SIST EN 388:2016+A1:2019

This European Standard specifies requirements, test methods, marking and information to be supplied for protective gloves against the mechanical risks of abrasion, blade cut, tear, puncture and, if applicable, impact.
This standard is intended to be used in conjunction with EN 420.
The test methods developed in this standard may also be applicable to arm protectors.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 19918:2017(Main)
Protective clothing - Protection against chemicals - Measurement of cumulative permeation of chemicals with low vapour pressure through materials (ISO 19918:2017)
SIST EN ISO 19918:2018

ISO 19918 describes laboratory test methods to determine the resistance of materials, closures, and seams used in personal protective equipment (PPE) to permeation by solid or liquid chemicals with low vapour pressure (less than 133,322 Pa at 25 °C) and/or insolubility in water or other liquids commonly used as collection media. These chemicals that are often part of pesticide formulations and other mixtures cannot be measured using other standards for measuring permeation. This test method is suitable for field strength and concentrated pesticide formulations as well as other mixtures in which the active ingredient is a chemical with low vapour pressure and/or low solubility in commonly used liquid and gaseous collection media.
This test method is not intended to be used in place of standards such as ISO 6529, EN 16523-1 and ASTM F739, which measure permeation of chemicals that are either volatile or soluble in water or other liquids that do not interact with the material being tested. ISO 19918 is not suitable for measurement of volatile chemicals that may evaporate before the chemical analysis is complete.
The degree of contamination depends on numerous factors, such as type of exposure, application technique, and chemical formulation. As the level of exposure can vary considerably, this method is designed to rate relative performance of PPE materials for different durations.
This method is designed to measure cumulative permeation. Breakthrough time cannot be measured by this method. This test method does not measure resistance to penetration or degradation.
The test method standard may be used for the evaluation of PPE materials that are new or those for which the product standard requires treatment, such as laundering or simulated abrasion. Details of the treatment shall be reported.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 374-1:2016(Main)
Protective gloves against dangerous chemicals and micro-organisms - Part 1: Terminology and performance requirements for chemical risks (ISO 374-1:2016)
SIST EN ISO 374-1:2017

ISO 374-1:2016 specifies the requirements for protective gloves intended to protect the user against dangerous chemicals and defines terms to be used.
NOTE          If other protection features have to be covered, e.g. mechanical risks, thermal risks, electrostatic dissipation etc., the appropriate specific performance standard is to be used in addition. Further information on protective gloves standards can be found in the EN 420.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day