Refuse collection vehicles - General requirements and safety requirements - Part 3: Front loaded refuse collection vehicles

This document applies to a front loaded refuse collection vehicle (RCV), as defined in 3.2.
This document deals with all significant hazards, hazardous situations and events relevant to the front loaded RCV, when it is used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, throughout its foreseeable lifetime, as defined in Clause 4.
This document is applicable to the design and construction of the front loaded RCV so as to ensure that it is fitted for its intended function and can be operated, cleaned (including unblocking), adjusted and maintained during its entire lifetime. It is not applicable to the end of life of the front loaded RCV.
This document describes and defines the safety requirements of the front loaded RCV excluding the interface with the lifting device(s) and excluding the lifting device itself and excluding loader cranes, which could be mounted on the RCV.
Safety requirements for the lifting device(s), loader cranes and their interface to the RCV are defined in EN 1501 5:2021.
Safety requirements for loader cranes are defined in EN 12999:2020. Additional specific requirements to loader cranes installed on RCVs are defined in EN 1501 5:2021.
This document also applies to compactors, operated on a truck for collecting purposes.
This document is not applicable to:
-   operation in severe conditions, e.g. extreme environmental conditions such as:
-   below −20 °C and above +40 °C temperatures;
-   tropical environment;
-   wind velocity in excess of 75 km/h;
-   contaminating environment;
-   corrosive environment;
-   operation in potentially explosive atmospheres;
-   handling of loads the nature of which could lead to dangerous situations (e.g. hot refuses, acids and bases, radioactive materials, contaminated refuse, especially fragile loads, explosives);
-   operation on ships.
This document is not applicable to machinery which is manufactured before the date of publication of this document by CEN.

Abfallsammelfahrzeuge - Allgemeine Anforderungen und Sicherheitsanforderungen - Teil 3: Frontlader

Dieses Dokument ist anzuwenden für Frontlader-Abfallsammelfahrzeuge (ASF), wie nach 3.2 definiert.
Dieses Dokument behandelt alle signifikanten Gefährdungen, Gefährdungssituationen und Ereignisse im Hinblick auf Frontlader ASF bei bestimmungsgemäßer Verwendung und bei Zuständen von Missbrauch, welche vom Hersteller während der voraussichtlichen Lebensdauer vernünftigerweise vorhersehbar sind, wie in Abschnitt 4 festgelegt.
Dieses Dokument gilt für die Gestaltung und Konstruktion eines Frontlader ASF, um sicherzustellen, dass es für seine bestimmungsgemäße Funktion geeignet ist und dass es während seiner gesamten Lebensdauer betrieben, gereinigt (einschließlich der Beseitigung von Blockierungen), eingestellt und instand gehalten werden kann. Es gilt nicht für das Ende der Lebensdauer des Frontlader ASF.
Dieses Dokument beschreibt und legt die Sicherheitsanforderungen an das Frontlader ASF unter Ausschluss der Schnittstelle mit der (den) Schüttung(en) und der Schüttung selbst und unter Ausschluss von Ladekranen, die auf das ASF montiert werden könnten fest.
Sicherheitsanforderungen an die Schüttung(en), die Ladekrane und deren Schnittstelle mit dem ASF sind in EN 1501 5:2021 festgelegt.
Sicherheitsanforderungen an Ladekrane sind in EN 12999:2020 festgelegt. Zusätzliche spezifische Anforderungen an auf ASF montierte Ladekrane sind in EN 1501 5:2021 festgelegt.
Dieses Dokument ist auch anzuwenden für Verdichter, die auf einem LKW zu Sammelzwecken betrieben werden.
Dieses Dokument ist nicht anzuwenden für:
- Betrieb unter Extrembedingungen, z. B. extreme Umgebungsbedingungen, wie:
- Temperaturen unter −20 °C und über +40 °C;
- tropische Umgebung;
- Windgeschwindigkeiten von mehr als 75 km/h;
- verunreinigende Umgebung;
- korrosive Atmosphäre;
- Betrieb in explosionsfähigen Atmosphären;
- Handhabung von Ladungen, die Gefährdungssituationen auslösen könnten (z. B. heiße Abfälle, Säuren und Basen, radioaktive Stoffe, verunreinigter Abfall, besonders zerbrechliche Ladungen, Explosivstoffe);
- Einsatz auf Schiffen.
Dieses Dokument ist nicht anzuwenden für Maschinen, die vor dem Datum der Veröffentlichung dieses Dokumentes durch CEN hergestellt wurden.

Véhicules de collecte de déchets - Exigences générales et exigences de sécurité - Partie 3 : Véhicules de collecte des déchets à chargement frontal

Le présent document s’applique aux véhicules de collecte de déchets (V.C.D.) à chargement frontal, tels que définis en 3.2.
Le présent document traite de tous les dangers, situations et phénomènes dangereux importants relatifs aux V.C.D. à chargement frontal, tels que définis à l’Article 4, lorsqu’ils sont utilisés conformément aux attentes et dans des conditions de mauvaise utilisation raisonnablement prévisibles par le fabricant, durant toute leur durée de vie prévue.
Le présent document est applicable à la conception et à la fabrication des V.C.D. à chargement frontal, en vue de garantir que les véhicules puissent accomplir leur fonction prévue et être utilisés, nettoyés (déblocage compris), réglés et entretenus durant leur durée de vie entière. Il ne s’applique pas à la fin de vie des V.C.D. à chargement frontal.
Le présent document décrit et définit les exigences de sécurité des V.C.D. à chargement frontal, à l’exclusion de l’interface avec le ou les lève-conteneurs et du lève-conteneur lui-même, et à l’exclusion des grues de chargement pouvant être montées sur les V.C.D.
Les exigences de sécurité des lève-conteneurs, des grues de chargement et de leur interface avec le V.C.D. sont définies dans l’EN 1501-5:2021.
Les exigences de sécurité des grues de chargement sont définies dans l’EN 12999:2020. L’EN 1501-5:2021 définit des exigences supplémentaires spécifiques pour les grues de chargement montées sur les V.C.D.
Le présent document s’applique également aux compacteurs utilisés sur un camion pour la collecte.
Le présent document ne s’applique pas :
- au fonctionnement dans des conditions difficiles, par exemple, des conditions environnementales extrêmes, telles que :
- des températures inférieures à -20 °C et supérieures à +40 °C ;
- un environnement tropical ;
- une vitesse de vent dépassant 75 km/h ;
- aux milieux polluants ;
- aux environnements corrosifs ;
- au fonctionnement dans des atmosphères potentiellement explosives ;
- à la manutention de chargements dont la nature pourrait donner lieu à des situations dangereuses (par exemple, déchets chauds, acides et bases, matériaux radioactifs, déchets contaminés, chargements particulièrement fragiles, explosifs) ;
- au fonctionnement sur les navires.
Le présent document ne s’applique pas aux machines fabriquées avant la date de publication de ce document par le CEN.

Vozila za zbiranje odpadlov - Splošne in varnostne zahteve - 3. del: Vozila za zbiranje odpadkov z nakladanjem spredaj

General Information

Status
Published
Publication Date
30-Mar-2021
Withdrawal Date
30-Mar-2022
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
31-Mar-2021
Due Date
16-Dec-2019
Completion Date
31-Mar-2021

Relations

Buy Standard

Standard
EN 1501-3:2021
English language
54 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN 1501-3:2018
English language
49 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 1501-3:2021
01-junij-2021
Nadomešča:
SIST EN 1501-3:2008
Vozila za zbiranje odpadlov - Splošne in varnostne zahteve - 3. del: Vozila za
zbiranje odpadkov z nakladanjem spredaj
Refuse collection vehicles - General requirements and safety requirements - Part 3:
Front loaded refuse collection vehicles
Abfallsammelfahrzeuge - Allgemeine Anforderungen und Sicherheitsanforderungen - Teil
3: Frontlader
Véhicules de collecte de déchets - Exigences générales et exigences de sécurité - Partie
3 : Véhicules de collecte des déchets à chargement frontal
Ta slovenski standard je istoveten z: EN 1501-3:2021
ICS:
13.030.40 Naprave in oprema za Installations and equipment
odstranjevanje in obdelavo for waste disposal and
odpadkov treatment
43.160 Vozila za posebne namene Special purpose vehicles
SIST EN 1501-3:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 1501-3:2021

---------------------- Page: 2 ----------------------
SIST EN 1501-3:2021


EN 1501-3
EUROPEAN STANDARD

NORME EUROPÉENNE

March 2021
EUROPÄISCHE NORM
ICS 43.160 Supersedes EN 1501-3:2008
English Version

Refuse collection vehicles - General requirements and
safety requirements - Part 3: Front loaded refuse
collection vehicles
Véhicules de collecte de déchets - Exigences générales Abfallsammelfahrzeuge - Allgemeine Anforderungen
et exigences de sécurité - Partie 3 : Véhicules de und Sicherheitsanforderungen - Teil 3: Frontlader
collecte des déchets à chargement frontal
This European Standard was approved by CEN on 15 February 2021.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 1501-3:2021 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 1501-3:2021
EN 1501-3:2021 (E)
Contents Page
European foreword . 3
Introduction . 5
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 9
4 List of significant hazards . 15
5 Safety requirements and protective measures . 18
5.1 General . 18
5.2 Danger zones . 18
5.3 Compaction mechanism . 20
5.4 Discharge system .
...

SLOVENSKI STANDARD
oSIST prEN 1501-3:2018
01-april-2018
9R]LOD]D]ELUDQMHRGSDGNRYLQSULSDGDMRþLL]WUHVDOQLNL6SORãQHLQYDUQRVWQH
]DKWHYHGHO9R]LOD]D]ELUDQMHRGSDGNRY]QDNODGDQMHPVSUHGDM
Refuse collection vehicles and their associated lifting devices - General requirements
and safety requirements - Part 3: Front loaded refuse collection vehicles
Abfallsammelfahrzeuge und die dazugehörigen Schüttungen - Allgemeine
Anforderungen und Sicherheitsanforderungen - Teil 3: Frontlader
Véhicules de collecte de déchets et leurs lève-conteneurs associés - Exigences
générales et exigences de sécurité - Partie 3 : Véhicules de collecte de déchets à
chargement frontal
Ta slovenski standard je istoveten z: prEN 1501-3
ICS:
13.030.40 Naprave in oprema za Installations and equipment
odstranjevanje in obdelavo for waste disposal and
odpadkov treatment
43.160 Vozila za posebne namene Special purpose vehicles
oSIST prEN 1501-3:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 1501-3:2018

---------------------- Page: 2 ----------------------
oSIST prEN 1501-3:2018


DRAFT
EUROPEAN STANDARD
prEN 1501-3
NORME EUROPÉENNE

EUROPÄISCHE NORM

February 2018
ICS 43.160 Will supersede EN 1501-3:2008
English Version

Refuse collection vehicles and their associated lifting
devices - General requirements and safety requirements -
Part 3: Front loaded refuse collection vehicles
Véhicules de collecte de déchets et leurs lève- Abfallsammelfahrzeuge und die dazugehörigen
conteneurs associés - Exigences générales et exigences Schüttungen - Allgemeine Anforderungen und
de sécurité - Partie 3 : Véhicules de collecte de déchets Sicherheitsanforderungen - Teil 3: Frontlader
à chargement frontal
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 183.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 1501-3:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 1501-3:2018
prEN 1501-3:2018 (E)
Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 8
4 List of significant hazards . 14
5 General safety requirements and protective measures . 18
5.1 General .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.