EN ISO 9902-3:2001/A2:2014
(Amendment)Textile machinery - Noise test code - Part 3: Nonwoven machinery - Amendment 2 (ISO 9902-3:2001/Amd 2:2014)
Textile machinery - Noise test code - Part 3: Nonwoven machinery - Amendment 2 (ISO 9902-3:2001/Amd 2:2014)
2013-08-21 EMA: Draft for // vote received in ISO/CS (see notification of 2013-08-20 in dataservice).
2012-11-08 GVN: Draft for // ENQ available at ISO/CS (see notification in dataservice on 2012-11-07)
Textilmaschinen — Geräuschmessverfahren — Teil 3: Vliesstoffmaschinen (ISO 9902-3:2001/Amd.2:2014)
Matériel pour l'industrie textile - Code d'essai acoustique - Partie 3: Machines de production de non-tissés - Amendement 2 (ISO 9902-3:2001/Amd 2:2014)
Tekstilni stroji - Preskusni postopki za merjenje hrupa - 3. del: Stroji za netkane materiale - Dopolnilo A2 (ISO 9902-3:2001/Amd 2:2014)
3. del standarda dopolnjuje 1. del in skupaj z njim določa zahteve za priključitev, delovanje in merjenje, potrebne za merjenje, deklariranje in preverjanje hrupa, ki ga oddajajo različne vrste strojev za pripravo preje in predilnih strojev. Uporablja se za inženirske metode (razred 2) in raziskovalne metode (razred 3), opredeljene v navedenih standardih. Stroji za netkane materiale zajemajo stroje za: – pripravo (ločevalnik bal, odpirač bal s samodejnim spajanjem, rahljalni volk, spajalnik, ventilator, kondenzator, odpirač) itd.
General Information
Relations
Overview
EN ISO 9902-3:2001/A2:2014 - "Textile machinery - Noise test code - Part 3: Nonwoven machinery - Amendment 2" is a CEN/ISO document amending the existing ISO 9902-3 test code for measuring noise emitted by nonwoven textile machinery. It updates the test-code framework used to assess machine noise emissions and aligns the European implementation with the ISO draft amendment prepared by ISO/TC 72 SC 8. The amendment was processed in parallel by CEN and ISO and includes a CEN annex relating the standard to EU machinery directives.
Key topics and requirements
- Scope: Applies to noise testing of nonwoven textile machinery and complements the broader ISO 9902 series for textile machinery noise measurement.
- Test code framework: Maintains the structure of ISO 9902-3 (measurement conditions, test set-up, instrumentation requirements and reporting) as the basis for consistent acoustic assessment of nonwoven machines.
- Measurement-grade note: Amendment 2 explicitly notes that grade 1 measurement methods (the highest-precision level) are normally not feasible for textile machinery because of the demanding measurement conditions they require. This guidance affects choice of practicable measurement grades for industry testing.
- Regulatory linkage: Includes an informative Annex ZA describing the relationship between the standard and the Essential Requirements of EU machinery directives, supporting a presumption of conformity when the standard is cited in the Official Journal.
- Technical oversight: Prepared by ISO/TC 72 (Textile machinery), Subcommittee SC 8 (Safety), and coordinated with CEN/TC 214.
Practical applications
- Machine manufacturers use the standard to:
- Specify acoustic performance during design and acceptance testing.
- Provide standardized noise data in technical documentation and declarations.
- Independent acoustic test laboratories and in‑house test teams use it to:
- Develop repeatable test procedures and reports for nonwoven equipment.
- Compare machine models and validate sound-reduction measures.
- Safety engineers, product compliance officers and purchasers use it to:
- Assess worker exposure risk and select machinery that meets regulatory noise limits.
- Demonstrate conformity with EU machinery directives through standardized test evidence.
Who should use this standard
- Textile and nonwoven machinery manufacturers
- Acoustic testing laboratories and consultants
- Product safety and compliance teams
- Standards committees and regulatory authorities
Related standards
- ISO 9902 series (other parts for different textile machinery types)
- National and EU machinery directives referenced in Annex ZA (for conformity assessment and regulatory compliance)
Keywords: EN ISO 9902-3:2001/A2:2014, textile machinery noise test code, nonwoven machinery, noise measurement, acoustic testing, machine noise emissions, ISO 9902 amendment, EU machinery directive.
Frequently Asked Questions
EN ISO 9902-3:2001/A2:2014 is a amendment published by the European Committee for Standardization (CEN). Its full title is "Textile machinery - Noise test code - Part 3: Nonwoven machinery - Amendment 2 (ISO 9902-3:2001/Amd 2:2014)". This standard covers: 2013-08-21 EMA: Draft for // vote received in ISO/CS (see notification of 2013-08-20 in dataservice). 2012-11-08 GVN: Draft for // ENQ available at ISO/CS (see notification in dataservice on 2012-11-07)
2013-08-21 EMA: Draft for // vote received in ISO/CS (see notification of 2013-08-20 in dataservice). 2012-11-08 GVN: Draft for // ENQ available at ISO/CS (see notification in dataservice on 2012-11-07)
EN ISO 9902-3:2001/A2:2014 is classified under the following ICS (International Classification for Standards) categories: 17.140.20 - Noise emitted by machines and equipment; 59.120.01 - Textile machinery in general; 59.120.99 - Other textile machinery. The ICS classification helps identify the subject area and facilitates finding related standards.
EN ISO 9902-3:2001/A2:2014 has the following relationships with other standards: It is inter standard links to EN ISO 9902-3:2001. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN ISO 9902-3:2001/A2:2014 is associated with the following European legislation: EU Directives/Regulations: 2006/42/EC; Standardization Mandates: M/BC/CEN/88/13. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase EN ISO 9902-3:2001/A2:2014 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CEN standards.
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 9902-3:2002/oprA2:2013
01-april-2013
Tekstilni stroji - Postopki za merjenje hrupa - 3. del: Stroji, ki niso namenjeni
tkanju - Dopolnilo A2 (ISO 9902-3:2001/DAM 2:2013)
Textile machinery - Noise test code - Part 3: Nonwoven machinery (ISO 9902-
3:2001/DAM 2:2013)
Textilmaschinen - Geräuschmessverfahren - Teil 3: Vliesstoffmaschinen (ISO 9902-
3:2001/DAM 2:2012)
Matériel pour l'industrie textile - Code d'essai acoustique - Partie 3: Machines de
production de non-tissés (ISO 9902-3:2001/DAM 2:2013)
Ta slovenski standard je istoveten z: EN ISO 9902-3:2001/prA2
ICS:
17.140.20 Emisija hrupa naprav in Noise emitted by machines
opreme and equipment
59.120.99 Drugi tekstilni stroji Other textile machinery
SIST EN ISO 9902-3:2002/oprA2:2013 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
SIST EN ISO 9902-3:2002/oprA2:2013
SIST EN ISO 9902-3:2002/oprA2:2013
EUROPEAN STANDARD
DRAFT
EN ISO 9902-3:2001
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA2
January 2013
ICS 17.140.20; 59.120.99
English Version
Textile machinery - Noise test code - Part 3: Nonwoven
machinery (ISO 9902-3:2001/DAM 2:2013)
Matériel pour l'industrie textile - Code d'essai acoustique -
Partie 3: Machines de production de non-tissés (ISO 9902-
3:2001/DAM 2:2013)
This draft amendment is submitted to CEN members for parallel enquiry. It has been drawn up by the Technical Committee CEN/TC 214.
This draft amendment A2, if approved, will modify the European Standard EN ISO 9902-3:2001. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has
the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 9902-3:2001/prA2:2013: E
worldwide for CEN national Members.
SIST EN ISO 9902-3:2002/oprA2:2013
EN ISO 9902-3:2001/prA2:2013 (E)
Contents Page
Foreword .3
SIST EN ISO 9902-3:2002/oprA2:2013
EN ISO 9902-3:2001/prA2:2013 (E)
Foreword
This document (EN ISO 9902-3:2001/prA2:2013) has been prepared by Technical Committee ISO/TC 72
"Textile machinery and machinery for dry-cleaning and industrial laundering" in collaboration with Technical
Committee CEN/TC 214 “Textile machinery and accessories” the secretariat of which is held by SNV.
This document is currently submitted to the parallel Enquiry.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
Endorsement notice
The text of ISO 9902-3:2001/DAM 2:2013 has been approved by CEN as a EN ISO 9902-3:2001/prA2:2013
without any modification.
SIST EN ISO 9902-3:2002/oprA2:2013
SIST EN ISO 9902-3:2002/oprA2:2013
DRAFT AMENDMENT ISO 9902-3:2001/DAM 2
ISO/TC 72/SC 8 Secretariat: DIN
Voting begins on Voting terminates on
2013-01-10 2013-06-10
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION • МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ • ORGANISATION INTERNATIONALE DE NORMALISATION
Textile machinery — Noise test code —
Part 3:
Nonwoven machinery
AMENDMENT 2
Matériel pour l'industrie textile — Code d'essai acoustique —
Partie 3: Machines de production de non-tissés
AMENDEMENT 2
ICS 17.140.20; 59.120.01
ISO/CEN PARALLEL PROCESSING
This draft has been developed within the International Organization for Standardization (ISO), and
processed under the ISO-lead mode of collaboration as defined in the Vienna Agreement.
This draft is hereby submitted to the ISO member bodies and to the CEN member bodies for a parallel
five-month enquiry.
Should this draft be accepted, a final draft, established on th
...
SLOVENSKI STANDARD
01-september-2014
Tekstilni stroji - Preskusni postopki za merjenje hrupa - 3. del: Stroji za netkane
materiale - Dopolnilo A2 (ISO 9902-3:2001/Amd 2:2014)
Textile machinery - Noise test code - Part 3: Nonwoven machinery - Amendment 2 (ISO
9902-3:2001/Amd 2:2014)
Textilmaschinen - Geräuschmessverfahren - Teil 3: Vliesstoffmaschinen - Änderung 2
(ISO 9902-3:2001/Amd 2:2014)
Matériel pour l'industrie textile - Code d'essai acoustique - Partie 3: Machines de
production de non-tissés - Amendement 2 (ISO 9902-3:2001/Amd 2:2014)
Ta slovenski standard je istoveten z: EN ISO 9902-3:2001/A2:2014
ICS:
17.140.20 Emisija hrupa naprav in Noise emitted by machines
opreme and equipment
59.120.99 Drugi tekstilni stroji Other textile machinery
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 9902-3:2001/A2
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2014
ICS 17.140.20; 59.120.99
English Version
Textile machinery - Noise test code - Part 3: Nonwoven
machinery - Amendment 2 (ISO 9902-3:2001/Amd 2:2014)
Matériel pour l'industrie textile - Code d'essai acoustique - Textilmaschinen - Geräuschmessverfahren - Teil 3:
Partie 3: Machines de production de non-tissés - Vliesstoffmaschinen - Änderung 2 (ISO 9902-3:2001/Amd
Amendement 2 (ISO 9902-3:2001/Amd 2:2014) 2:2014)
This amendment A2 modifies the European Standard EN ISO 9902-3:2001; it was approved by CEN on 7 May 2014.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 9902-3:2001/A2:2014 E
worldwide for CEN national Members.
Contents Page
Foreword .3
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 2006/42/EC .4
Foreword
This document (EN ISO 9902-3:2001/A2:2014) has been prepared by Technical Committee ISO/TC 72
"Textile machinery and accessories" in collaboration with Technical Committee CEN/TC 214 “Textile
machinery and accessories” the secretariat of which is held by SNV.
This Amendment to the European Standard EN ISO 9902-3:2001 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by December 2014, and
conflicting national standards shall be withdrawn at the latest by December 2014.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuani
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...