EN ISO 23325:2020

Dentistry - Corrosion resistance of dental amalgam (ISO 23325:2020)

This document specifies the requirements for the permissible reduction in strength resulting from crevice corrosion of dental amalgam products that are within the scope of ISO 24234 or ISO 20749. It provides details of the test procedure for determining this.

Zahnheilkunde - Korrosionsbeständigkeit von Dentalamalgam (ISO 23325:2020)

Dieses Dokument beschreibt die Anforderungen an die zulässige Reduzierung der Festigkeit von dentalen Amalgamprodukten, die im Anwendungsbereich von ISO 24234 und ISO 20749 liegen, aufgrund der Spaltkorrosion. Es beschreibt Einzelheiten des Prüfverfahrens um diese zu ermitteln.

Médecine bucco-dentaire - Résistance à la corrosion des amalgames dentaires (ISO 23325:2020)

Le présent document spécifie les exigences applicables à la réduction admissible de la résistance consécutive à la corrosion caverneuse d'amalgames dentaires faisant partie du domaine d'application de l'ISO 24234 ou de l'ISO 20749. Il fournit des informations sur le mode opératoire d'essai applicable à la détermination de cette résistance.

Zobozdravstvo - Odpornost zobnega amalgama proti koroziji (ISO 23325:2020)

General Information

• Status: Published
• Publication Date: 14-Jul-2020
• Withdrawal Date: 30-Jan-2021
• ICS: 11.060.10 - Dental materials
• Technical Committee: CEN/TC 55 - Dentistry
• Drafting Committee: CEN/TC 55 - Dentistry
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 15-Jul-2020
• Completion Date: 15-Jul-2020
• Ref Project: SIST EN ISO 23325:2020 - Dentistry - Corrosion resistance of dental amalgam (ISO 23325:2020)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 23325:2020
01-september-2020
Zobozdravstvo - Odpornost zobnega amalgama proti koroziji (ISO 23325:2020)
Dentistry - Corrosion resistance of dental amalgam (ISO 23325:2020)
Zahnheilkunde - Korrosionsbeständigkeit von Dentalamalgam (ISO 23325:2020)
Médecine bucco-dentaire - Résistance à la corrosion des amalgames dentaire (ISO
23325:2020)
Ta slovenski standard je istoveten z: EN ISO 23325:2020
ICS:
11.060.10 Zobotehnični materiali Dental materials
SIST EN ISO 23325:2020 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 23325:2020

---------------------- Page: 2 ----------------------
SIST EN ISO 23325:2020


EN ISO 23325
EUROPEAN STANDARD

NORME EUROPÉENNE

July 2020
EUROPÄISCHE NORM
ICS 11.060.10
English Version

Dentistry - Corrosion resistance of dental amalgam (ISO
23325:2020)
Médecine bucco-dentaire - Résistance à la corrosion Zahnheilkunde - Korrosionsbeständigkeit von
des amalgames dentaires (ISO 23325:2020) Dentalamalgam (ISO 23325:2020)
This European Standard was approved by CEN on 9 June 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 23325:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 23325:2020
EN ISO 23325:2020 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 23325:2020
EN ISO 23325:2020 (E)
European foreword
This document (EN ISO 23325:2020) has been prepared by Technical Committee ISO/TC 106
"Dentistry" in collaboration with Technical Committee CEN/TC 55 “Dentistry” the secretariat of which
is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by January 2021, and conflicting national standards shall
be withdrawn at the latest by January 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 23325:2020 has been approved by CEN as EN ISO 23325:2020 without any modification.


3

---------------------- Page: 5 ----------------------
SIST EN ISO 23325:2020

---------------------- Page: 6 ----------------------
SIST EN ISO 23325:2020
INTERNATIONAL ISO
STANDARD 23325
First edition
2020-06
Dentistry — Corrosion resistance of
dental amalgam
Médecine bucco-dentaire — Résistance à la corrosion des amalgames
dentaires
Reference number
ISO 23325:2020(E)
©
ISO 2020

---------------------- Page: 7 ----------------------
SIST EN ISO 23325:2020
ISO 23325:2020(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publica
...