Electronic fee collection - Evaluation of equipment for conformity to ISO 17575-1 - Part 2: Abstract test suite (ISO 16407-2:2018)

The ISO 16407 series provides a suite of tests in order to assess the Front End (FE) and Back End (BE) behaviour compliancy towards the requirements listed in ISO 17575‑1. This document contains the definition of such tests in the form of test cases, reflecting the required individual steps listed in specific test purposes defined in ISO 16407‑1. The test cases are written in Testing and Test Control Notation version 3 (TTCN v3).

Elektronische Gebührenerhebung - Konformitätsbeurteilung von Einrichtungen nach ISO 17575-1 - Teil 2: Zusammengefasstes Prüfprogramm (ISO 16407-2:2018)

Perception de télépéage - Évaluation de conformité de l'équipement à l'ISO 17575-1 - Partie 2: Suite de test abstraite (ISO 16407-2:2018)

La norme ISO 16407 (toutes parties) a pour domaine d'application la fourniture d'une série d'essais ayant pour but d'évaluer la conformité des comportements du système frontal et du système central par rapport aux exigences énumérées dans l'ISO 17575‑1. Le présent document définit ces essais sous la forme de cas d'essais, indiquant les différentes étapes requises dans les buts d'essais spécifiques définis par l'ISO 16407‑1. Les cas d'essais sont présentés dans la version 3 du document « Testing and Test Control Notation » (notation des essais et des contrôles d'essais, TTCN v3).

Elektronsko pobiranje pristojbin - Ugotavljanje skladnosti opreme z ISO 17575-1 - 2. del: Abstraktni preskuševalni niz (ISO 16407-2:2018)

Skupina standardov ISO 16407 določa preskuševalni niz za ocenjevanje skladnosti vedenja čelnega (FE) in zalednega (BE) dela glede zahtev, ki so navedene v standardu ISO 17575-1. Ta dokument vsebuje opredelitve teh preskusov v obliki preskusnih primerov, ki odražajo posamezne korake, navedene v določenih namenih preskušanja, določenih v standardu ISO 16407-1. Preskusni primeri so zapisani v 3. različici zapisa preskušanja in krmilnih preskusov (TTCN v3).

General Information

Status
Published
Publication Date
11-Dec-2018
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Due Date
12-Dec-2018
Completion Date
12-Dec-2018

RELATIONS

Buy Standard

Standard
EN ISO 16407-2:2019
English language
20 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN ISO 16407-2:2019
01-februar-2019
1DGRPHãþD
SIST-TS CEN ISO/TS 16407-2:2012

Elektronsko pobiranje pristojbin - Ugotavljanje skladnosti opreme z ISO 17575-1 -

2. del: Abstraktni preskuševalni niz (ISO 16407-2:2018)

Electronic fee collection - Evaluation of equipment for conformity to ISO 17575-1 - Part 2:

Abstract test suite (ISO 16407-2:2018)

Elektronische Gebührenerhebung - Konformitätsbeurteilung von Einrichtungen nach ISO

17575-1 - Teil 2: Zusammengefasstes Prüfprogramm (ISO 16407-2:2018)

Perception de télépéage - Évaluation de conformité de l'équipement à l'ISO 17575-1 -

Partie 2: Suite de test abstraite (ISO 16407-2:2018)
Ta slovenski standard je istoveten z: EN ISO 16407-2:2018
ICS:
03.220.20 Cestni transport Road transport
35.240.60 Uporabniške rešitve IT v IT applications in transport
prometu
SIST EN ISO 16407-2:2019 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 16407-2:2019
---------------------- Page: 2 ----------------------
SIST EN ISO 16407-2:2019
EN ISO 16407-2
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2018
EUROPÄISCHE NORM
ICS 03.220.20; 35.240.60 Supersedes CEN ISO/TS 16407-2:2012
English Version
Electronic fee collection - Evaluation of equipment for
conformity to ISO 17575-1 - Part 2: Abstract test suite (ISO
16407-2:2018)

Perception de télépéage - Évaluation de conformité de Elektronische Gebührenerhebung -

l'équipement à l'ISO 17575-1 - Partie 2: Suite de test Konformitätsbeurteilung von Einrichtungen nach ISO

abstraite (ISO 16407-2:2018) 17575-1 - Teil 2: Zusammengefasstes Prüfprogramm
(ISO 16407-2:2018)
This European Standard was approved by CEN on 9 November 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this

European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references

concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN

member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by

translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management

Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,

Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,

Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 16407-2:2018 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 16407-2:2019
EN ISO 16407-2:2018 (E)
Contents Page

European foreword ....................................................................................................................................................... 3

---------------------- Page: 4 ----------------------
SIST EN ISO 16407-2:2019
EN ISO 16407-2:2018 (E)
European foreword

This document (EN ISO 16407-2:2018) has been prepared by Technical Committee ISO/TC 204

"Intelligent transport systems" in collaboration with Technical Committee CEN/TC 278 “Intelligent

transport systems” the secretariat of which is held by NEN.

This European Standard shall be given the status of a national standard, either by publication of an

identical text or by endorsement, at the latest by June 2019, and conflicting national standards shall be

withdrawn at the latest by June 2019.

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CEN shall not be held responsible for identifying any or all such patent rights.

This document supersedes CEN ISO/TS 16407-2:2012.

This document has been prepared under a mandate given to CEN by the European Commission and the

European Free Trade Association.

According to the CEN-CENELEC Internal Regulations, the national standards organizations of the

following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,

Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,

France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,

Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,

Turkey and the United Kingdom.
Endorsement notice

The text of ISO 16407-2:2018 has been approved by CEN as EN ISO 16407-2:2018 without any

modification.
---------------------- Page: 5 ----------------------
SIST EN ISO 16407-2:2019
---------------------- Page: 6 ----------------------
SIST EN ISO 16407-2:2019
INTERNATIONAL ISO
STANDARD 16407-2
First edition
2018-11
Electronic fee collection — Evaluation
of equipment for conformity to
ISO 17575-1 —
Part 2:
Abstract test suite
Perception de télépéage — Évaluation de conformité de l'équipement
à l'ISO 17575-1 —
Partie 2: Suite de test abstraite
Reference number
ISO 16407-2:2018(E)
ISO 2018
---------------------- Page: 7 ----------------------
SIST EN ISO 16407-2:2019
ISO 16407-2:2018(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2018

All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may

be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting

on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address

below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 16407-2:2019
ISO 16407-2:2018(E)
Contents Page

Foreword ........................................................................................................................................................................................................................................iv

Introduction ..................................................................................................................................................................................................................................v

1 Scope ................................................................................................................................................................................................................................. 1

2 Normative references ...................................................................................................................................................................................... 1

3 Terms and definitions ..................................................................................................................................................................................... 1

4 Abbreviated terms .............................................................................................................................................................................................. 2

5 Abstract test method (ATM) ...................................................................................................................................................................... 2

5.1 Introduction .............................................................................................................................................................................................. 2

5.2 Test architecture .................................................................................................................................................................................... 2

5.2.1 Security .................................................................................................................................................................................... 3

5.3 Protocol Implementation Extra Information for Testing (PIXIT)................................................................ 3

6 Untestable Test Purposes (TPs) ............................................................................................................................................................ 3

7 ATS data structures ............................................................................................................................................................................................ 4

7.1 ASN.1 description ................................................................................................................................................................................. 4

7.2 Parameterized support .................................................................................................................................................................... 4

8 Message filtering .................................................................................................................................................................................................. 6

9 ATS naming conventions............................................................................................................................................................................... 6

9.1 Introduction .............................................................................................................................................................................................. 6

9.2 Definition naming conventions ................................................................................................................................................. 6

9.3 Test case identifier ............................................................................................................................................................................... 7

9.4 TTCN-3 modules identifier ........................................................................................................................................................... 8

Annex A (normative) Abstract Test Suite (ATS) for FE and BE ................................................................................................... 9

Annex B (informative) PIXIT proforma for FE and BE .....................................................................................................................10

Bibliography .............................................................................................................................................................................................................................12

© ISO 2018 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 16407-2:2019
ISO 16407-2:2018(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards

bodies (ISO member bodies). The work of preparing International Standards is normally carried out

through ISO technical committees. Each member body interested in a subject for which a technical

committee has been established has the right to be represented on that committee. International

organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.

ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of

electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are

described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the

different types of ISO documents should be noted. This document was drafted in accordance with the

editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/directives).

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of

any patent rights identified during the development of the document will be in the Introduction and/or

on the ISO list of patent declarations received (see www .iso .org/patents).

Any trade name used in this document is information given for the convenience of users and does not

constitute an endorsement.

For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and

expressions related to conformity assessment, as well as information about ISO's adherence to the

World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following

URL: www .iso .org/iso/foreword .html.
This document was prepared by ISO/TC 204, Intelligent transport systems.

This first edition of ISO 16407-2 cancels and replaces ISO/TS 16407-2:2012, which has been technically

revised. The following changes have been made:
— conversion from a Technical Specification to an International Standard;

— amendments to reflect changes to the underlying base standards, especially the ISO 17575 series;

— major changes regarding:
— data element changes introduced by ISO 17575-1:2016 and ISO 17575-3:2016;
— new test cases related to:
— authentication support in Charge Report;
— authentication support in Usage Statement;
— DUT responses behavior;
— removed test cases related to:
— communicatons services;

— rules with respect to support of charging which are no longer required by ISO 17575-1:2016;

— revised terms and definitions;
— editorial and formal corrections as well as changes to improve readability.

Any feedback or questions on this document should be directed to the user’s national standards body. A

complete listing of these bodies can be found at www .iso .org/members .html.
iv © ISO 2018 – All rights reserved
---------------------- Page: 10 ----------------------
SIST EN ISO 16407-2:2019
ISO 16407-2:2018(E)
Introduction

This document is part of a series of standards that supports interoperability of autonomous EFC-

systems. Autonomous systems use satellite positioning, often combined with additional sensor

technologies such as gyroscopes, odometers, and accelerometers, to localise the vehicle and to find its

position on a map containing the charged geographic objects, such as charged roads or charged areas.

From the charged objects, the vehicle characteristics, the time of day and other data that are relevant

for describing road use, the tariff and ultimately the road usage fee is determined.

Autonomous on-board equiment (OBE) operates without relying on dedicated road-side infrastructure

by employing wide-area technologies such as Global Navigation Satellite Systems (GNSS) and Cellular

Communications Networks (CN). Therefore, autonomous systems may also be referred to as GNSS/CN

systems.

This document defines tests for conformity evaluation of Front End and Back End that comply with the

requirements towards the charging specified in ISO 17575-1.
ISO 16407-2 is based on ISO 16407-1.
© ISO 2018 – All rights reserved v
---------------------- Page: 11 ----------------------
SIST EN ISO 16407-2:2019
---------------------- Page: 12 ----------------------
SIST EN ISO 16407-2:2019
INTERNATIONAL STANDARD ISO 16407-2:2018(E)
Electronic fee collection — Evaluation of equipment for
conformity to ISO 17575-1 —
Part 2:
Abstract test suite
1 Scope

The ISO 16407 series provides a suite of tests in order to assess the Front End (FE) and Back End

(BE) behaviour compliancy towards the requirements listed in ISO 17575-1. This document contains

the definition of such tests in the form of test cases, reflecting the required individual steps listed in

specific test purposes defined in ISO 16407-1. The test cases are written in Testing and Test Control

Notation version 3 (TTCN v3).
2 Normative references

The following documents are referred to in the text in such a way that some or all of their content

constitutes requirements of this document. For dated references, only the edition cited applies. For

undated references, the latest edition of the referenced document (including any amendments) applies.

ISO 16407-1:2017, Electronic fee collection — Evaluation of equipment for conformity to ISO 17575-1 —

Part 1: Test suite structure and test purposes

ISO 17575-1:2016, Electronic fee collection — Application interface definition for autonomous systems —

Part 1: Charging
3 Terms and definitions
For the purposes of this document the following terms and definitions apply.

ISO and IEC maintain terminological databases for use in standardization at the following addresses:

— IEC Electropedia: available at https: //www .electropedia .org/
— ISO Online browsing platform: available at https: //www .iso .org/obp
3.1
Back End
part of a back office system interfacing to one or more Front Ends
[SOURCE: ISO 17575-1:2016, 3.4]
3.2
conformance testing
assessment to determine whether an implementation complies with the requirements
3.3
Front End

part of a tolling system consisting of an OBE, and possibly a proxy where tolling information and usage

data are collected and processed for delivery to the Back End

[SOURCE: ISO/TS 19299:2015, 3.17, modified — “front end” and “back end” have been capitalized.]

© ISO 2018 – All rights reserved 1
---------------------- Page: 13 ----------------------
SIST EN ISO 16407-2:2019
ISO 16407-2:2018(E)
3.4
implementation under test

implementation of one or more open systems interconnection (OSI) protocols in an adjacent user/

provider relationship, being part of a real system which is to be studied by testing

3.5
system under test
real system in which the implementation under test resides
3.6
test case

description of test purpose, unique test case identifier, test inputs, test execution conditions, test steps,

and the results required to pass the test
[SOURCE: ISO/IEC 18013-4:2011, 4.1]
4 Abbreviated terms
For the purposes of this document, the following abbreviated terms apply.
ASN.1 Abstract Syntax Notation One
ATM Abstract Test Method
ATS Abstract Test Suite
BE Back End
DUT Device Under Test
FE Front End
IUT Implementation Under Test
PIXIT Protocol Implementation Extra Information for Testing
SCS Semiconductor Characterization System
SUT System Under Test
TC Test Case
TTCN-3 Testing and Test Control Notation version 3
5 Abstract test method (ATM)
5.1 Introduction

This clause describes the abstract test method (ATM) used to test the layers at the Front End (FE) side

and at the Back End (BE) side.
5.2 Test architecture

The implementation under test (IUT) is either the Front End or the Back End. The system under test (SUT)

comprises also the communication sub-layer, which is necessary to perform the IUT tests.

The tester shall execute the testing and test control notation version 3 (TTCN-3) test cases of the present

document as specified in Annex A, running on an emulated communication sub-layer.

2 © ISO 2018 – All rights reserved
---------------------- Page: 14 ----------------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.