prEN 14570

LPG equipment and accessories - Equipping of overground and underground LPG vessels

This European Standard specifies requirements for the equipping of LPG pressure vessels, overground and underground, with a volume not greater than 13 m3 manufactured in accordance with EN 12542 or equivalent and have been hydraulically tested.
The equipment covered by this European Standard is directly mounted onto the pressure vessel connections.
This European Standard excludes the equipping of depot storage vessels and refrigerated storage vessels.

Flüssiggas-Geräte und Ausrüstungsteile - Ausrüstung von oberirdisch und unterirdisch aufgestellten Behältern für Flüssiggas (LPG)

Équipements pour GPL et leurs accessoires - Équipement des réservoirs sous pression GPL aériens et enterrés

Oprema in pribor za utekočinjeni naftni plin (UNP) - Oprema za nadzemne in podzemne posode za UNP

General Information

• Status: Not Published
• Publication Date: 24-Oct-2023
• ICS: 23.020.35 - Gas cylinders
• Technical Committee: CEN/TC 286 - Liquefied petroleum gas equipment and accessories
• Drafting Committee: CEN/TC 286/WG 7 - Operational requirements - Transportable LPG cylinders and static LPG tanks
• Current Stage: 4599 - Dispatch of FV draft to CMC - Finalization for Vote
• Start Date: 21-Dec-2023
• Due Date: 18-Oct-2022
• Completion Date: 21-Dec-2023
• Directive: 2014/68/EU - Directive 2014/68/EU of the European Parliament and of the Council of 15 May 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: oSIST prEN 14570:2022 - LPG equipment and accessories - Equipping of overground and underground LPG vessels

Relations

• Revises: EN 14570:2014 - LPG equipment and accessories - Equipping of overground and underground LPG vessels
• Effective Date: 13-Jan-2021

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 14570:2022
01-april-2022
Oprema in pribor za utekočinjeni naftni plin (UNP) - Oprema za nadzemne in
podzemne posode za UNP
LPG equipment and accessories - Equipping of overground and underground LPG
vessels
Flüssiggas-Geräte und Ausrüstungsteile ¿ Ausrüstung von oberirdisch und unterirdisch
aufgestellten Behältern für Flüssiggas (LPG)
Équipements et accessoires GPL - Équipement des réservoirs sous pression GPL
aériens et enterrés
Ta slovenski standard je istoveten z: prEN 14570
ICS:
23.020.10 Nepremične posode in Stationary containers and
rezervoarji tanks
oSIST prEN 14570:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 14570:2022

---------------------- Page: 2 ----------------------
oSIST prEN 14570:2022


DRAFT
EUROPEAN STANDARD
prEN 14570
NORME EUROPÉENNE

EUROPÄISCHE NORM

March 2022
ICS 23.020.35 Will supersede EN 14570:2014
English Version

LPG equipment and accessories - Equipping of overground
and underground LPG vessels
Équipements et accessoires GPL - Équipement des Flüssiggas-Geräte und Ausrüstungsteile ¿ Ausrüstung
réservoirs sous pression GPL aériens et enterrés von oberirdisch und unterirdisch aufgestellten
Behältern für Flüssiggas (LPG)
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 286.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 14570:2022 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 14570:2022
prEN 14570:2022 (E)
Contents Page

European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms, definitions and abbreviations . 7
3.1 Terms and definitions . 7
3.2 Abbreviations . 9
4 Pressure vessel equipment . 9
4.1 General. 9
4.2 Selection of pressure vessel equipment . 10
4.3 Screwed joints . 10
4.4 Seals and
...