EN 13530-2:2002/AC:2006

Cryogenic vessels - Large transportable vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing

Kryo-Behälter - Große ortsbewegliche, vakuum-isolierte Behälter - Teil 2: Bemessung, Herstellung und Prüfung

Récipients cryogéniques - Grands récipients transportables isolés sous vide - Partie 2: Conception, fabrication, inspection et essais

Kriogene posode – Velike premične, vakuumsko izolirane posode – 2. del: Načrtovanje, izdelava, nadzor in preskus

General Information

• Status: Published
• Publication Date: 22-Aug-2006
• ICS: 23.020.40 - Cryogenic vessels
• Technical Committee: CEN/TC 268 - Cryogenic vessels
• Drafting Committee: CEN/TC 268/WG 2 - Compatibility, insulation, accessories
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 23-Aug-2006
• Completion Date: 23-Aug-2006
• Directive: 94/55/EC - Transport of dangerous goods by road
• Directive: 96/49/EC - Transport of dangerous goods by rail
• Directive: 96/86/EC - Transport of dangerous goods by road (94/55/EC Dir. amendment)
• Directive: 96/87/EC - Transport of dangerous goods by rail (96/49/EC Dir. amendment)
• Mandate: M/086 - Mandate to CEN for standardization in the field of transport of dangerous goods
• Ref Project: SIST EN 13530-2:2003/AC:2007 - Cryogenic vessels - Large transportable vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing

Relations

• Corrects: EN 13530-2:2002 - Cryogenic vessels - Large transportable vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing
• Effective Date: 22-Dec-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Cryogenic vessels - Large transportable vacuum insulated vessels - Part 2: Design, fabrication, inspection and testingRécipients cryogéniques - Grands récipients transportables isolés sous vide - Partie 2: Conception, fabrication, inspection et essaisKryo-Behälter - Große ortsbewegliche, vakuum-isolierte Behälter - Teil 2: Bemessung, Herstellung und PrüfungTa slovenski standard je istoveten z:EN 13530-2:2002/AC:2006SIST EN 13530-2:2003/AC:2007en,fr,de23.020.40Proti mrazu odporne posode (kriogenske posode)Cryogenic vesselsICS:SLOVENSKI
STANDARDSIST EN 13530-2:2003/AC:200701-januar-2007

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13530-2:2002/ACAugust 2006Août 2006August 2006ICS 23.020.40English versionVersion FrançaiseDeutsche FassungCryogenic vessels - Large transportable vacuum insulated vessels - Part 2:Design, fabrication, inspection and testingRécipients cryogéniques - Grandsrécipients transportables isolés sous vide -Partie 2: Conception, fabrication, inspectionet essaisKryo-Behälter - Große ortsbewegliche,vakuum-isolierte Behälter - Teil 2:Bemessung, Herstellung und PrüfungThis corrigendum becomes effective on 23 August 2006 for incorporation in the three officiallanguage versions of the EN.Ce corrigendum prendra effet le 23 août 2006 pour incorporation dans les trois versions linguistiquesofficielles de la EN.Die Berichtigung tritt am 23.August 2006 zur Einarbeitung in die drei offiziellen Sprachfassungen derEN in Kraft.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members.Tous droits d'exploitation sous quelque forme et de quelque manière que ce soit réservés dans le monde entier auxmembres nationaux du CEN.Alle Rechte der Verwertung, gleich in welcher Form und in welchem Verfahren, sind weltweit den nationalen Mitgliedernvon CEN vorbehalten.Ref. No.:EN 13530-2:2002/AC:2006 D/E/F

Modify key to read : h/ea ≤16 Figure 3a)
Modify the formula given in the key to read esDa⋅55,0 Figure 3b)

Figure 3c)
Figure 3d)
Modify key to read : h/ea ≤50 x1 ≤
min −2;)(55,0b1lcsDa x2 ≤
min −2;)(55,02blcsDa
Figure 3e)
Figure 4b)
Figure 5
Figure 11
Figure 12c) : Modify to read
“flat plate welded into the shell from one side only”
Design factor C : for s ≤ 3 s1
= 0, 45 ; for sf3 s1
= 0, 50 Figure 12e) : Modify to read
“flat plate welded into the shell from both sides”
Design factor C : for s ≤ 3 s1
= 0, 35 ; for sf3 s1
= 0, 40
Replace Figure 13 and modify Key with the following:

Key 1 Rectangle 2 Ellipse Y Design factor Ce X Ratio f/e Rectangular plates Elliptical plates f = short side of the rectangular plate f = short side of the eliptical plate e = long side of the rectangular plate e = long side of the eliptical plate ≤<≤<=∑=−100
56210110411ie,,,,efefefACii ≤<=∑=−411ie01430iiefefAC,, A1 = 1,589 146 00 A2 = -0,239 349 90 A3 = -0,335 179 80 A4 = 0,085 211 76 A1 = 1,489 146 00 A2 = -0,239 349 90 A3 = -0,335 179 80 A4 = 0,085 211 76 Figure 13 — Design factor Ce for rectangular or elliptical flat plates

Figure 14
Figure 15
Figure 17
Figure 22
Figure 23
...