EN ISO 14271:2011

Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds (ISO 14271:2011)

ISO 14271:2011 specifies the procedures for the hardness testing of etched cross-sections of resistance spot, projection, and seam welds.
The aim of the hardness tests is to determine the Vickers hardness, in the low-force or microhardness range, of the weld nugget, the heat affected zone, and parent material in ferrous or non-ferrous metals for welds made in sheets of thickness 0,5 mm to 6 mm.

Widerstandsschweißen - Vickers-Härteprüfung (Kleinkraft- und Mikrohärtebereich) von Widerstandspunkt-, Buckel- und Rollennahtschweißverbindungen (ISO 14271:2011)

Diese Internationale Norm legt Verfahren für die Härteprüfung an geätzten Querschliffen von Wider-standspunkt , Buckel  und Rollennahtschweißungen fest.
Das Ziel dieser Härteprüfungen ist, für geschweißte Bleche aus Eisenmetallen und Nicht Eisenmetallen mit Dicken zwischen 0,5 mm, und 6 mm die Vickershärte im Kleinkraft  oder Mikrohärtebereich in der Schweißlinse, in der Wärmeein¬flusszone und im Grundwerkstoff zu bestimmen.

Soudage par résistance - Essais de dureté Vickers (force réduite et microdureté) sur soudures par résistance par points, par bossages et à la molette (ISO 14271:2011)

L'ISO 14271:2011 spécifie les modes opératoires pour l'essai de dureté de sections ayant subi une attaque métallographique des soudures par résistance par points, par bossages et à la molette.
Les essais de dureté visent à déterminer la dureté Vickers, sous force réduite ou de microdureté, du noyau de soudure, de la zone affectée thermiquement et du matériau de base des métaux ferreux ou non ferreux des soudures réalisées dans des tôles d'épaisseur comprise entre 0,5 mm et 6 mm.

Elektrouporovno varjenje - Preskušanje trdote po Vickersu (majhna obremenitev in mikro trdota) na uporovnih točkovnih, bradavičnih in kolutnih zvarih (ISO 14271:2011)

Ta mednarodni standard določa postopke za preskušanje trdote jedkanih prečnih prerezov uporovnih točkovnih, bradavičnih in kolutnih zvarov.
Namen preskušanja trdote je določiti trdoto zvarnega zrna po Vickersu (v razponu nizke sile ali mikrotrdote), toplotno vplivanega območja in matičnega materiala pri železnih in neželeznih kovinah za zvare, narejene v ploščah z debelino med 0,5 mm in 6 mm.

General Information

• Status: Withdrawn
• Publication Date: 31-Aug-2011
• Withdrawal Date: 26-Sep-2017
• ICS: 25.160.40 - Welded joints and welds
• Technical Committee: CEN/TC 121 - Welding
• Drafting Committee: CEN/TC 121 - Welding
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 27-Sep-2017
• Ref Project: SIST EN ISO 14271:2011 - Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds (ISO 14271:2011)

Relations

• Replaces: EN ISO 14271:2001 - Vickers hardness testing of resistance spot, projection and seam welds (low load and microhardness) (ISO 14271:2000)
• Effective Date: 08-Jun-2022
• Replaced By: EN ISO 14271:2017 - Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds (ISO 14271:2017)
• Effective Date: 04-Oct-2017
• Corrected By: EN ISO 14271:2011/AC:2012 - Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds - Technical Corrigendum 1 (ISO 14271:2011/Cor 1:2012)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 14271:2011
01-november-2011
1DGRPHãþD
SIST EN ISO 14271:2002
(OHNWURXSRURYQRYDUMHQMH3UHVNXãDQMHWUGRWHSR9LFNHUVXPDMKQDREUHPHQLWHYLQ
PLNURWUGRWDQDXSRURYQLKWRþNRYQLKEUDGDYLþQLKLQNROXWQLK]YDULK,62

Resistance welding - Vickers hardness testing (low-force and microhardness) of
resistance spot, projection, and seam welds (ISO 14271:2011)
Widerstandsschweißen - Vickers Härteprüfung (Kleinkraft- und Mikrohärtebereich) von
Widerstandspunkt-, Buckel- und Rollennahtschweißungen (ISO 14271:2011)
Soudage par résistance - Essai de dureté Vickers (force réduite et microdureté) sur
soudures par résistance par points, par bossages et à la molette (ISO 14271:2011)
Ta slovenski standard je istoveten z: EN ISO 14271:2011
ICS:
25.160.40 Varjeni spoji in vari Welded joints
SIST EN ISO 14271:2011 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 14271:2011

---------------------- Page: 2 ----------------------

SIST EN ISO 14271:2011


EUROPEAN STANDARD
EN ISO 14271

NORME EUROPÉENNE

EUROPÄISCHE NORM
September 2011
ICS 25.160.40 Supersedes EN ISO 14271:2001
English Version
Resistance welding - Vickers hardness testing (low-force and
microhardness) of resistance spot, projection, and seam welds
(ISO 14271:2011)
Soudage par résistance - Essais de dureté Vickers (force Widerstandsschweißen - Vickers-Härteprüfung (Kleinkraft-
réduite et microdureté) sur soudures par résistance par und Mikrohärtebereich) von Widerstandspunkt-, Buckel-
points, par bossages et à la molette (ISO 14271:2011) und Rollennahtschweißverbindungen (ISO 14271:2011)
This European Standard was approved by CEN on 27 August 2011.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 14271:2011: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 14271:2011
EN ISO 14271:2011 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 14271:2011
EN ISO 14271:2011 (E)
Foreword
This document (EN ISO 14271:2011) has been prepared by Technical Committee ISO/TC IIW “International
Institute of Welding” in collaboration with Technical Committee CEN/TC 121 “Welding” the secretariat of which
is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by March 2012, and conflicting national standards shall be withdrawn at
the latest by March 2012.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 14271:2001.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 14271:2011 has been approved by CEN as a EN ISO 14271:2011 without any modification.

3

---------------------- Page: 5 ----------------------

SIST
...