EN ISO 10058-2:2008

Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) - Part 2: Wet chemical analysis (ISO 10058-2:2008)

ISO 10058-2:2008 specifies traditional (“wet process”) methods for the chemical analysis of magnesite and dolomite refractory products and raw materials.

Chemische Analyse von feuerfesten Erzeugnissen aus Magnesit und Dolomit (Alternative zur Röntgenfluoreszenzanalyse) - Teil 2: Nasschemische Analyse (ISO 10058-2:2008)

Dieser Teil von ISO 10058 legt die traditionellen (nasschemischen) Verfahren der chemischen Analyse für feuerfeste Erzeugnisse und Rohstoffe aus Magnesit und Dolomit.
Dieser Teil von ISO 10058 gilt für die nach Tabelle 1 angegebenen Bestandteile und Bestimmungsbereiche.

Analyse chimique des produits de magnésie et de dolomie (méthode alternative à la méthode par fluorescence de rayons X) - Partie 2: Méthodes d'analyse chimique par voie humide (ISO 10058-2:2008)

L'ISO 10058-2:2008 spécifie le dosage, par des méthodes classiques d'analyse chimique («analyse par voie humide»), des produits réfractaires à base de magnésie et de dolomie et des matières premières contenant de la magnésie et de la dolomie.

Kemijska analiza magnezitnih in dolomitnih ognjevzdržnih izdelkov (alternativa rentgenski fluorescenčni metodi) - 2. del: Mokra kemijska analiza (ISO 10058-2:2008)

General Information

• Status: Published
• Publication Date: 30-Nov-2008
• Withdrawal Date: 29-Jun-2009
• ICS: 73.080 - Non-metalliferous minerals
• ICS: 81.080 - Refractories
• Technical Committee: CEN/TC 187 - Refractory products and materials
• Drafting Committee: CEN/TC 187/WG 4 - Chemical analysis
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 01-Dec-2008
• Due Date: 22-Mar-2009
• Completion Date: 01-Dec-2008
• Ref Project: SIST EN ISO 10058-2:2009 - Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) - Part 2: Wet chemical analysis (ISO 10058-2:2008)

Relations

• Replaces: EN ISO 10058:1996 - Magnesites and dolomites - Chemical analysis (ISO 10058:1992)
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 10058-2:2009
01-marec-2009
1DGRPHãþD
SIST EN ISO 10058:1998
.HPLMVNDDQDOL]DPDJQH]LWQLKLQGRORPLWQLKRJQMHY]GUåQLKL]GHONRYDOWHUQDWLYD
UHQWJHQVNLIOXRUHVFHQþQLPHWRGLGHO0RNUDNHPLMVNDDQDOL]D,62

Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray
fluorescence method) - Part 2: Wet chemical analysis (ISO 10058-2:2008)
Chemische Analyse von feuerfesten Erzeugnissen aus Magnesit und Dolomit
(Alternative zur Röntgenfluoreszenzanalyse) - Teil 2: Nasschemische Analyse (ISO
10058-2:2008)
Analyse chimique des produits de magnésie et de dolomie (méthode alternative a la
méthode par fluorescence de rayons X) - Partie 2: Méthodes d'analyse chimique par voie
humide(ISO 10058-2:2008)
Ta slovenski standard je istoveten z: EN ISO 10058-2:2008
ICS:
71.040.40 Kemijska analiza Chemical analysis
73.080 Nekovinske rudnine Non-metalliferous minerals
81.080 Ognjevzdržni materiali Refractories
SIST EN ISO 10058-2:2009 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 10058-2:2009

---------------------- Page: 2 ----------------------

SIST EN ISO 10058-2:2009
EUROPEAN STANDARD
EN ISO 10058-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2008
ICS 73.080 Supersedes EN ISO 10058:1996
English Version
Chemical analysis of magnesite and dolomite refractory
products (alternative to the X-ray fluorescence method) - Part 2:
Wet chemical analysis (ISO 10058-2:2008)
Analyse chimique des produits de magnésie et de dolomie Chemische Analyse von feuerfesten Erzeugnissen aus
(méthode alternative à la méthode par fluorescence de Magnesit und Dolomit (Alternative zur
rayons X) - Partie 2: Méthodes d'analyse chimique par voie Röntgenfluoreszenzanalyse) - Teil 2: Nasschemische
humide (ISO 10058-2:2008) Analyse (ISO 10058-2:2008)
This European Standard was approved by CEN on 1 November 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10058-2:2008: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 10058-2:2009
EN ISO 10058-2:2008 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 10058-2:2009
EN ISO 10058-2:2008 (E)
Foreword
This document (EN ISO 10058-2:2008) has been prepared by Technical Committee ISO/TC 33 "Refractories"
in collaboration with Technical Committee CEN/TC 187 “Refractory products and materials” the secretariat of
which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by June 2009, and conflicting national standards shall be withdrawn at
the latest by June 2009.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 10058:1996.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 10058-2:2008 h
...