EN ISO 16812:2003

Petroleum and natural gas industries - Shell-and-tube heat exchangers (ISO 16812:2002)

Erdöl- und Erdgasindustrie - Röhrenkesselwärmetauscher (ISO 16812:2002)

Diese Internationale Norm nennt Anforderungen und Empfehlungen für mechanische Auslegung, Materialwahl, Herstellung, Abnahme, Prüfung und Versandvorbereitung bei Röhrenkesselwärmetauschern für die Erdöl- und Erdgasindustrie.
Diese Internationale Norm ist auf folgende Typen von Röhrenkesselwärmetauschern anwendbar: Heizgeräte, Kondensatoren, Kühlgeräte und Regeneratoren.
Diese Internationale Norm ist nicht anwendbar auf Vakuumdampfflächenkondensatoren und
Speisewasserheizgeräte.

Industries du pétrole et du gaz naturel - Echangeurs de chaleur à faisceaux (ISO 16812:2002)

Petroleum and natural gas industries - Shell-and-tube heat exchangers (ISO 16812:2002)

General Information

• Status: Withdrawn
• Publication Date: 25-Nov-2003
• Withdrawal Date: 14-Feb-2007
• ICS: 27.060.30 - Boilers and heat exchangers
• ICS: 75.180.20 - Processing equipment
• Technical Committee: CEN/TC 12 - Materials, equipment and offshore structures for petroleum and natural gas industries
• Drafting Committee: CEN/TC 12 - Materials, equipment and offshore structures for petroleum and natural gas industries
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 15-Feb-2007
• Completion Date: 15-Feb-2007
• Ref Project: SIST EN ISO 16812:2004 - Petroleum and natural gas industries - Shell-and-tube heat exchangers (ISO 16812:2002)

Relations

• Replaced By: EN ISO 16812:2007 - Petroleum, petrochemical and natural gas industries - Shell-and-tube heat exchangers (ISO 16812:2007)
• Effective Date: 22-Dec-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Petroleum and natural gas industries - Shell-and-tube heat exchangers (ISO 16812:2002)Erdöl- und Erdgasindustrie - Röhrenkesselwärmetauscher (ISO 16812:2002)Industries du pétrole et du gaz naturel - Echangeurs de chaleur a faisceaux (ISO 16812:2002)Petroleum and natural gas industries - Shell-and-tube heat exchangers (ISO 16812:2002)75.180.20Predelovalna opremaProcessing equipment71.120.30Prenosniki toploteHeat exchangersICS:Ta slovenski standard je istoveten z:EN ISO 16812:2003SIST EN ISO 16812:2004en01-maj-2004SIST EN ISO 16812:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN ISO 16812November 2003ICS 27.060.30; 75.180.20English versionPetroleum and natural gas industries - Shell-and-tube heatexchangers (ISO 16812:2002)Industries du pétrole et du gaz naturel - Echangeurs dechaleur à faisceaux (ISO 16812:2002)Erdöl- und Erdgasindustrie - Röhrenkesselwärmetauscher(ISO 16812:2002)This European Standard was approved by CEN on 3 November 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN ISO 16812:2003 ESIST EN ISO 16812:2004

Reference numberISO 16812:2002(E)© ISO 2002
INTERNATIONAL STANDARD ISO16812First edition2002-07-01Petroleum and natural gas industries — Shell-and-tube heat exchangers Industries du pétrole et du gaz naturel — Échangeurs de chaleur à faisceaux
ISO 16812:2002(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
©
ISO 2002 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body in the country of the requester. ISO copyright office Case postale 56 • CH-1211 Geneva 20 Tel.
+ 41 22 749 01 11 Fax
+ 41 22 749 09 47 E-mail
[e-mail] Web
www.iso.ch Printed in Switzerland
ii © ISO 2002 – All rights reserved
ISO 16812:2002(E) © ISO 2002 – All rights reserved iii Contents Page Foreword.v Introduction.vi 1 Scope.1 2 Normative references.1 3 Terms and definitions.1 4 General.2 5 Proposals.3 5.1 Purchaser’s responsibilities.3 5.2 Vendor’s responsibilities.3 6 Drawings and other required data.3 6.1 Outline drawings.3 6.2 Information required after drawings are reviewed.4 6.3 Reports and records.6 7 Design.6 7.1 Design temperature.6 7.2 Cladding for corrosion allowance.6 7.3 Shell supports.7 7.4 Stationary head.7 7.5 Floating head.7 7.6 Tube bundle.8 7.7 Nozzles and other connections.11 7.8 Flanged external girth joints.12 7.9 Expansion joints.12 7.10 Gaskets.12 7.11 Handling devices.12 7.12 Hydrogen service.13 8 Materials.13 8.1 General.13 8.2 Gaskets.13 8.3 Tubes.13 9 Fabrication.14 9.1 Shells.14 9.2 Pass-partition plates.14 9.3 Connection junctions.14 9.4 Tubes.14 SIST EN ISO 16812:2004

ISO 16812:2002(E) iv © ISO 2002 – All rights reserved
9.5 Welding.14 9.6 Heat treatment.15 9.7 Dimensional tolerances.15 9.8 Gasket contact surfaces other than nozzle flange facings.16 9.9 Tube-hole grooves.16 9.10 Tube-to-tubesheet joints.17 9.11 Assembly.17 10 Inspection and testing.17 10.1 Quality assurance.17 10.2 Quality control.18 10.3 Pressure testing.19 10.4 Nameplates and stampings.20 11 Preparation for shipment.20 11.1 Protection.20 11.2 Identification.21 12 Supplemental requirements.21 12.1 General.21 12.2 Design.21 12.3 Examination.21 Annex A (informative)
Specification sheet.23 Annex B (informative)
Shell-and-tube heat exchanger checklist.34 Annex C (informative)
Responsibility specification sheet.36 Annex D (informative)
Recommended practices.37 Bibliography.39
ISO 16812:2002(E) © ISO 2002 – All rights reserved v Foreword ISO (the International Orga
...