EN 12735-1:2010
(Main)Copper and copper alloys - Seamless, round copper tubes for air conditioning and refrigeration - Part 1: Tubes for piping systems
Copper and copper alloys - Seamless, round copper tubes for air conditioning and refrigeration - Part 1: Tubes for piping systems
This European Standard specifies the requirements, sampling, test methods and conditions of delivery for seamless round copper tubes used for refrigeration and air-conditioning piping systems (i.e. piping, connections, repairs).
It is applicable to tubes with an outside diameter from 3 mm up to and including 133 mm.
These tubes are supplied in straight lengths in the material conditions hard or half-hard, or in coils in the annealed material condition.
Kupfer und Kupferlegierungen - Nahtlose Rundrohre aus Kupfer für die Kälte- und Klimatechnik - Teil 1: Rohre für Leitungssysteme
Diese Europäische Norm legt die Anforderungen, Probenentnahme, Prüfverfahren und Lieferbedingungen für nahtlose Rundrohre aus Kupfer fest, die in Leitungssystemen der Kälte und Klimatechnik (d. h. Rohrleitungen, Verbindungen, Ausbesserungen) verwendet werden.
Sie gilt für Rohre mit einem Außendurchmesser von 3 mm bis 133 mm.
Diese Rohre werden in geraden Längen geliefert, im Zustand hart oder halbhart, oder in Ringen, geglüht.
Cuivre et alliages de cuivre - Tubes ronds sans soudure en cuivre pour l'air conditionné et la réfrigération - Partie 1: Tubes pour canalisations
La présente Norme européenne spécifie les exigences, le mode d'échantillonnage, les méthodes d'essai et
les conditions de livraison applicables aux tubes ronds en cuivre sans soudure utilisés dans les circuits d'air
conditionné et de réfrigération (c’est-à-dire : canalisations, raccordements, réparations).
Elle s’applique aux tubes ayant un diamètre extérieur de 3 mm à 133 mm inclus.
Ces tubes sont livrés en longueurs droites à l'état dur ou demi-dur ou bien en couronnes à l'état recuit.
Baker in bakrove zlitine - Nevarjene okrogle bakrene cevi za hladilno in klimatsko tehniko - 1. del: Cevi za napeljave
Ta evropski standard določa zahteve, vzorčenje, preskusne metode in pogoje dostavljanja nevarjenih okroglih bakrenih cevi, ki se uporabljajo za hladilne in klimatske napeljave (t.j. cevi, priključke, popravila). Velja za cevi z zunanjim premerom od 3 mm do in vključno 133 mm. Te cevi se dostavljajo v ravnih dolžinah pri trdih ali poltrdih stanjih materiala in kot navoji pri žarjenemu stanju materiala.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Baker in bakrove zlitine - Nevarjene okrogle bakrene cevi za hladilno in klimatsko tehniko - 1. del: Cevi za napeljaveKupfer und Kupferlegierungen - Nahtlose Rundrohre aus Kupfer für die Kälte- und Klimatechnik - Teil 1: Rohre für LeitungssystemeCuivre et alliages de cuivre - Tubes ronds sans soudure en cuivre pour l'air conditionné et la réfrigération - Partie 1: Tubes pour canalisationsCopper and copper alloys - Seamless, round copper tubes for air conditioning and refrigeration - Part 1: Tubes for piping systems77.150.30Bakreni izdelkiCopper products23.040.15Cevi iz neželeznih kovinNon-ferrous metal pipesICS:Ta slovenski standard je istoveten z:EN 12735-1:2010SIST EN 12735-1:2010en,de01-oktober-2010SIST EN 12735-1:2010SLOVENSKI
STANDARDSIST EN 12735-1:2002/A1:2005SIST EN 12735-1:20021DGRPHãþD
SIST EN 12735-1:2010
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12735-1
July 2010 ICS 23.040.15 Supersedes EN 12735-1:2001English Version
Copper and copper alloys - Seamless, round copper tubes for air conditioning and refrigeration - Part 1: Tubes for piping systems
Cuivre et alliages de cuivre - Tubes ronds sans soudure en cuivre pour l'air conditionné et la réfrigération - Partie 1: Tubes pour canalisations
Kupfer und Kupferlegierungen - Nahtlose Rundrohre aus Kupfer für die Kälte- und Klimatechnik - Teil 1: Rohre für Leitungssysteme This European Standard was approved by CEN on 12 June 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12735-1:2010: ESIST EN 12735-1:2010
EN 12735-1:2010 (E) 2
Contents Page Foreword .3Introduction .51Scope .62Normative references .63Terms and definitions .74Designations .84.1Material .84.2Material condition .84.3Product .85Ordering information .96Requirements .96.1Composition .96.2Mechanical properties .96.3Dimensions and tolerances .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.