iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 1553:1999

(Main)

Agricultural machinery - Agricultural self-propelled, mounted, semi-mounted and trailed machines - Common safety requirements

Agricultural machinery - Agricultural self-propelled, mounted, semi-mounted and trailed machines - Common safety requirements

This standard deals with safety requirements and their verification for the design and construction of common aspects of all kinds of agricultural self-propelled ride-on machines and mounted, semi-mounted or trailed machines, with the exclusion of tractors (as defined in article 1 (1) of Council Directive 74/150/EEC), agricultural aircraft and air cushion vehicles.

Landmaschinen - Selbstfahrende, angebaute, aufgesattelte und gezogene Landmaschinen - Gemeinsame Sicherheitsanforderungen

Diese Norm enthält sicherheitstechnische Anforderungen und deren Überprüfung für die Gestaltung und Konstruktion von gemeinsamen Merkmalen von allen Arten selbstfahrenden Landmaschinen mit Fahrersitz und angebauten, aufgesattelten oder gezogenen Landmaschinen, mit Ausnahme von Traktoren (wie in Artikel 1 (1) der Richtlinie des Rates 74/150/EWG definiert) und landwirtschaftlichen Luftfahrzeugen sowie Luftkissen-Fahrzeugen.

Matériel agricole - Machines automotrices, portées, semi-portées et traînées - Prescriptions communes de sécurité

La présente norme détermine les prescriptions de sécurité et les vérifications pour la conception et la construction des caractéristiques communes à tous les types de machines agricoles automotrices à conducteur porté, machines portées, semi-portées ou traînées, à l'exclusion des tracteurs (tels que définis à l'article 1 (1) de la directive du conseil 74/150/CEE), des aéronefs agricoles et des véhicules sur coussin d'air.

Kmetijski stroji - Kmetijski stroji z lastnim pogonom, nošeni, polnošeni in vlečeni - Splošne varnostne zahteve

General Information

Status
Withdrawn
Publication Date
16-Nov-1999
Withdrawal Date
13-Dec-2005
ICS
65.060.01 - Agricultural machines and equipment in general
Technical Committee
CEN/TC 144 - Tractors and machinery for agriculture and forestry
Drafting Committee
CEN/TC 144/WG 1 - General safety requirements
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
14-Dec-2005
Completion Date
14-Dec-2005
Directive
98/37/EC - Machinery
Mandate
M/BC/CEN/91/1 - Standardization request to CEN/CENELEC concerning machines presenting hazards due to mobility or load lifting
Ref Project
SIST EN 1553:2000 - Agricultural machinery - Agricultural self-propelled, mounted, semi-mounted and trailed machines - Common safety requirements

Relations

Replaced By
EN ISO 4254-1:2005 - Agricultural machinery - Safety - Part 1: General requirements (ISO 4254-1:2005)
Effective Date
22-Dec-2008

Buy Standard

EN 1553:2000EN 1553:2000
PreviousNext
Standard
EN 1553:2000
English language
37 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 1553:2000
01-oktober-2000
.PHWLMVNLVWURML.PHWLMVNLVWURML]ODVWQLPSRJRQRPQRãHQLSROQRãHQLLQYOHþHQL
6SORãQHYDUQRVWQH]DKWHYH
Agricultural machinery - Agricultural self-propelled, mounted, semi-mounted and trailed
machines - Common safety requirements
Landmaschinen - Selbstfahrende, angebaute, aufgesattelte und gezogene
Landmaschinen - Gemeinsame Sicherheitsanforderungen
Matériel agricole
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 4254-1:2015/A1:2021(Amendment)
Agricultural machinery - Safety - Part 1: General requirements - Amendment 1 (ISO 4254-1:2013/Amd 1:2021)
SIST EN ISO 4254-1:2016/A1:2022

2021-11-08 JF:via decision BT C204/2021, taken on 2021-11-03, CEN/BT approved  revised Annex ZA of the EN. EN under publication.
2021-02-18 JF: at the meeting held on 2021-02-17 with French Authorities, HAS Consultant and ISO and CEN representatives the LoC assessment at 2nd FV was resolved
2021-02-01 TAN: The ballot is put on hold in ISO. Ballot cancelled in CEN.
2021-01-06 JF: through decision C224/2020, CEN/BT approved the 2nd vote
2020-07-10 JF: CEN and ISO/TCs intend to have a 2nd vote in order to address LoC assessment as the changes are technical. CCMC asked CEN/TC to launch the ballot on 2nd vote.
2020-06-30 JF: CEN/TC Secretariat informed about the need to revise the Annex ZA in order to address the concerns of market surveillance authorites. The Annex ZA is intended to be revised after the publication of ISO standard

  • Amendment
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17344:2020(Main)
Agricultural machinery - Self-propelled agricultural and forestry vehicles - Requirements for braking
SIST EN 17344:2020

This document applies to wheeled and/or track-laying self-propelled agricultural and forestry vehicles when used on public roads. It specifies the definitions, construction and performance requirements and the means for verification of braking systems on vehicles with a maximum design speed not exceeding 60 km/h.
Following items are excluded from the scope of this document:
-   coupling force control;
-   endurance braking systems;
-   Anti-Lock Braking Systems and EBS;
-   vacuum braking systems;
-   safety related parts of complex electronic control systems;
-   trailer braking control systems.
NOTE   For assisted trailer braking the EU Regulation 2015/68 can be used but before including these requirements into this document, an additional review of 2015/68 is needed.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12965:2019(Main)
Tractors and machinery for agriculture and forestry - Power take-off (PTO) drive shafts and their guards - Safety
SIST EN 12965:2020

This document specifies safety requirements and their verification for the design and construction of power take-off (PTO) drive shafts and their guards linking a tractor or self-propelled machinery to the first fixed bearing of recipient machinery. It describes methods for the elimination or reduction of risks which need specific requirements including such risks arising from misuse, reasonably foreseeable by the manufacturer. It is applicable only to those PTO drive shafts and guards mechanically linked to the shaft by at least two bearings.
In addition, it specifies the type of information on safe working practices to be provided by the manufacturer.
This document does not deal with:
-   the guards totally covering, but not mechanically linked to, the PTO drive shaft;
-   the mechanical characteristics of PTO drive shafts, overrun devices and torque limiters;
-   general hazards which are dealt with in EN ISO 4254-1:2015 (see introduction).
Environmental aspects have not been considered in this document.
This document is not applicable to PTO drive shafts and their guards which are manufactured before the date of publication of this document by CEN.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 18497:2018(Main)
Agricultural machinery and tractors - Safety of highly automated agricultural machines - Principles for design (ISO 18497:2018)
SIST EN ISO 18497:2019

This document specifies principles for the design of highly automated aspects of highly automated machines and vehicles (e.g. agricultural tractors, tractor implement systems, implements and self-propelled machinery) during agricultural field operations. In addition, it provides guidance on the type of information on safe working practices (including information about residual risks) to be provided by the manufacturer.
The purpose of this document is to assist in the provision of safety requirements, means of verification and information for use to ensure an appropriate level of safety for agricultural and forestry tractors and self-propelled machines with functions allowing highly automated operations (see 3.7).
This document deals with all the significant hazards, hazardous situations and events (as listed in Annex A), relevant to agricultural and forestry tractors and self-propelled machines allowing highly automated field operations when used as intended and under the conditions of misuse foreseeable by the manufacturer during normal operation and service.
NOTE 1    While this document gives principles for the design, verification, validation and provision of information for use of a highly automated agricultural machine (HAAM), the detailed specification of requirements for a specific application will be dependent on the machine and its operating conditions. Therefore, the principles for design given in this document need to be extended for specific HAAM by the use of relevant specific (type-C) standards, when available, or by the manufacturer of the machine using risk assessment. Such additional specification of requirements, for design, verification, validation or information for use are outside the scope of this document.
NOTE 2    Safety requirements for specific machines not related to their highly automated operations can be available in machine-specific type-C standards.
This document is not applicable to:
—          forestry applications;
—          mobile, semi-mobile or stationary machinery used for farm yard or barn operations;
—          operations on public roads including relevant requirements for braking and steering systems.
NOTE 3    With respect to implements (e.g. their specific design, functions) and the communication between tractors and implements, additional risks can be relevant and can require additional measures. Such additional measures are outside the scope of this document and are the responsibility of the manufacturer.
This document is not applicable to agricultural and forestry tractors, tractor implement systems, implements and self-propelled machines which are manufactured before the date of its publication.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    16 pages
    German language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16944:2017(Main)
Agricultural machinery and tractors - Standardized access to repair and maintenance information (RMI) - Requirements
SIST EN 16944:2017

This European Standard specifies the requirements to be fulfilled by manufacturers of tractors, interchangeable towed equipment and trailers used in agriculture and forestry in order to comply with the obligation to provide non-discriminatory access for independent operators to Repair and Maintenance Information (RMI) and to provide information on On-Board Diagnostic (OBD) systems.
This standard specifies all organisational and technical requirements and means of verification to comply with the EU Regulation 167/2013 and its Delegated Acts with the objectives to allow the fair competition between manufacturers and between operators and to improve the competitiveness and future viability of companies with special regard to Small and Medium-sized Enterprises (SME).
This European Standard is applicable to agricultural and forestry vehicles approved (respectively to be approved) in accordance with the EU Regulation 167/2013.
This European Standard is not applicable to small series vehicles.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 4254-14:2016(Main)
Agricultural machinery - Safety - Part 14: Bale wrappers (ISO 4254-14:2016)
SIST EN ISO 4254-14:2016

ISO 4254-14:2016 intended to be used together with ISO 4254‑1, specifies the safety requirements and their verification for the design and construction of mounted, semi-mounted, trailed, and stationary bale wrapper for bales of agricultural harvesting products including wrappers which are combined or integrated with pick-up balers.
It describes methods for the elimination or reduction of hazards arising from the intended use and reasonably foreseeable misuse of these machines by one person (the operator) in the course of normal operation and service.
In addition, it specifies the type of information on safe working practices to be provided by the manufacturer.
NOTE 1       Requirements for self-propelled bale wrappers may be added during the next revision of this part of ISO 4254.
NOTE 2       Examples of these machines are given in Annex A.
NOTE 3       Requirements for pick-up balers are specified in ISO 4254‑11.
When requirements of this part of ISO 4254 are different from those which are stated in ISO 4254‑1, the requirements of this part of ISO 4254 take precedence over the requirements of ISO 4254‑1 for machines that have been designed and built according to the requirements of this part of ISO 4254.
This part of ISO 4254, taken together with ISO 4254‑1, deals with all the significant hazards (as listed in Table 1), hazardous situations, and events relevant to mounted, semi-mounted, and trailed bale wrappers including wrappers which are combined with pick-up balers when they are used as intended and under the conditions of misuse that are reasonably foreseeable by the manufacturer (see Clause 4).
ISO 4254-14:2016 is not applicable to the following:
-      non-mobile fixed bale wrappers;
-      tube/inline wrappers;
-      wrapping process that concerns only the circumferential part of the bale and that occurs in the bale chamber;
-      the integrity of safety related parts of control systems with regard to the specification of performance levels;
-      environmental hazards (except noise), road safety, and hazards related to moving parts for power transmission;
-      hazards related to maintenance or repairs carried out by professional service personnel.
NOTE 4       Specific requirements related to road traffic regulations are not taken into account in this part of ISO 4254.
ISO 4254-14:2016 is not applicable to machines manufactured before the date of its publication.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    34 pages
    German language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 17989-1:2015(Main)
Tractors and machinery for agriculture and forestry - Sustainability - Part 1: Principles (ISO 17989-1:2015)
SIST EN ISO 17989-1:2016

ISO 17989-1:2015 provides guidelines to assist designers and manufacturers of tractors and machinery for agriculture and forestry to integrate sustainability principles, practices and considerations into their organizations and processes. This part of ISO 17989 is specifically applicable to equipment used in the production of food, fibres, fuel and lumber for humans and livestock.
NOTE          This part of ISO 17989 includes three different levels for the application: principles, recommendations and additional information (annexes).
ISO 17989-1:2015 is addressed to the organization management and provides guidance for considering sustainability aspects relevant for the organization and the product life cycle. It defines the factory gate as the system boundary (Figure 1).
ISO 17989-1:2015 is not applicable to contractual or regulatory purposes or to registration and certification.
Except when they are closely related to sustainability, this part of ISO 17989 does not address issues of occupational health and safety or operator safety aspects of a machine's design. Designers can find guidance on these issues in other International Standards.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 4254-1:2015(Main)
Agricultural machinery - Safety - Part 1: General requirements (ISO 4254-1:2013)
SIST EN ISO 4254-1:2016

ISO 4254-1:2013 specifies the safety requirements and the means of their verification for the design and construction of self-propelled ride-on machines, mounted, semi-mounted and trailed machines used in agriculture in order to deal with the hazards which are typical for most of the machines. In addition, it specifies the type of information on safe working practices including information about residual risks to be provided by the manufacturer.
This document deals with significant hazards, hazardous situations and events relevant to this agricultural machinery when used as intended and under the conditions of misuse foreseeable by the manufacturer during normal operation and service.
ISO 4254-1:2013 is not applicable to
?       agricultural or forestry tractors,
?       aircraft and air-cushion vehicles used in agriculture,
?       lawn and garden equipment,
?       machine-specific components or functions (e.g. working tools and/or processes).
ISO 4254-1:2013 is not applicable to hazards related to periodic service, machine conversion and repairs intended to be carried out by professional service personnel, environmental hazards, road safety (e.g. steering, braking), or to the power take-off (PTO) drive shaft; neither is it applicable to guards of moving parts for power transmission except for strength requirements for guards and barriers.
ISO 4254-1:2013 is not applicable to machines which are manufactured before the date of its publication.
Not all of the hazards dealt with by ISO 4254-1:2013 are necessarily present on a particular machine. A risk assessment should be carried out by the manufacturer to determine the hazards that are applicable and any hazards in addition to those dealt with by this part or a relevant machine-specific part. The requirements of a machine-specific part of ISO 4254 take precedence over the requirements of this part.

  • Standard
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 16231-2:2015(Main)
Self-propelled agricultural machinery - Assessment of stability - Part 2: Determination of static stability and test procedures (ISO 16231-2:2015)
SIST EN ISO 16231-2:2015

ISO 16231-2:2015 specifies a method to determine the centre of gravity of un-laden self-propelled machines, a method to determine the centre of gravity of laden machines and combinations with attachments, and methods to determine the static overturning angle.
NOTE          Requirements related to self-protective structures and ROPS are to be dealt with in a separate International Standard.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 16230-1:2015(Main)
Agricultural machinery and tractors - Safety of higher voltage electrical and electronic components and systems - Part 1: General requirements (ISO 16230-1:2015)
SIST EN ISO 16230-1:2015

ISO 16230-1:2015 is applicable to tractors and self-propelled ride-on machines, mounted implements, and towed implements used in agriculture and forestry. This part of ISO 16230 specifies general requirements that relate to the protection and safety of operators and bystanders on machines with on-board voltages in the range of 50 V AC to 1000 V AC and 75 V DC to 1500 V DC. This part of ISO 16230 applies to electrical equipment and parts of the electrical equipment on such machines and includes general requirements related to the protection and safety of operators, bystanders, and first responders.
ISO 16230-1:2015 deals with significant hazards, hazardous situations, and events, as listed in Annex A, relevant to this agricultural machinery when used as intended and under the conditions of misuse foreseeable by the manufacturer during normal operation and service.
ISO 16230-1:2015 is not applicable to the following:
-      specific design elements of external interfaces (e.g. the interface between a tractor and implement);
-      externally powered equipment (e.g. line powered equipment, equipment without on-board power generation);
-      purpose built forestry machines;
-      stationary electrical generators.
ISO 16230-1:2015 is not applicable to machines which are manufactured before the date of its publication.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day