EN ISO 4534:2010

Vitreous and porcelain enamels - Determination of fluidity behaviour - Fusion flow test (ISO 4534:2010)

ISO 4534:2010 specifies a comparative method of determining the fluidity behaviour of vitreous and porcelain enamels in the viscous condition during firing. It is not intended for use as an absolute method.

Emails und Emaillierungen - Prüfung des Fließverhaltens - Ablaufversuch (ISO 4534:2010)

Diese Internationale Norm legt ein Vergleichsverfahren für die Bestimmung des Fließverhaltens von Emails im
viskosen Zustand während des Brennens fest. Das Verfahren ist nicht für die Anwendung als
Absolutverfahren vorgesehen.

Émaux vitrifiés - Détermination du comportement de fluidité - Essai d'écoulement (ISO 4534:2010)

L'ISO 4534:2010 spécifie une méthode comparative de détermination du comportement de fluidité de l'émail vitrifié à l'état visqueux pendant la cuisson. Elle n'est pas destinée à servir de méthode absolue.

Steklasti in keramični emajli za aluminij - Ugotavljanje tekočnosti - Preskus toka taline (ISO 4534:2010)

Ta mednarodni standard določa primerjalno metodo za ugotavljanje tekočnosti steklastih in keramičnih emajlov v viskoznem stanju med žganjem. Ne uporablja se kot absolutna metoda.

General Information

• Status: Published
• Publication Date: 14-Dec-2010
• Withdrawal Date: 29-Jun-2011
• ICS: 25.220.50 - Enamels
• Technical Committee: CEN/TC 262 - Metallic and other inorganic coatings
• Drafting Committee: CEN/TC 262/WG 12 - Maintenance and ISO co-ordination
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 15-Dec-2010
• Due Date: 14-May-2010
• Completion Date: 15-Dec-2010
• Ref Project: SIST EN ISO 4534:2011 - Vitreous and porcelain enamels - Determination of fluidity behaviour - Fusion flow test (ISO 4534:2010)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 4534:2011
01-november-2011
6WHNODVWLLQNHUDPLþQLHPDMOL]DDOXPLQLM8JRWDYOMDQMHWHNRþQRVWL3UHVNXVWRND
WDOLQH,62
Vitreous and porcelain enamels - Determination of fluidity behaviour - Fusion flow test
(ISO 4534:2010)
Emails und Emaillierungen - Prüfung des Fließverhaltens - Ablaufversuch (ISO
4534:2010)
Émaux vitrifiés - Détermination du comportement de fluidité - Essai d'écoulement (ISO
4534:2010)
Ta slovenski standard je istoveten z: EN ISO 4534:2010
ICS:
25.220.50 Emajlne prevleke Enamels
SIST EN ISO 4534:2011 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 4534:2011

---------------------- Page: 2 ----------------------

SIST EN ISO 4534:2011


EUROPEAN STANDARD
EN ISO 4534

NORME EUROPÉENNE

EUROPÄISCHE NORM
December 2010
ICS 25.220.50
English Version
Vitreous and porcelain enamels - Determination of fluidity
behaviour - Fusion flow test (ISO 4534:2010)
Émaux vitrifiés - Détermination du comportement de fluidité Emails und Emaillierungen - Prüfung des Fließverhaltens -
- Essai d'écoulement (ISO 4534:2010) Ablaufversuch (ISO 4534:2010)
This European Standard was approved by CEN on 14 December 2010.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 4534:2010: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 4534:2011
EN ISO 4534:2010 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 4534:2011
EN ISO 4534:2010 (E)
Foreword
This document (EN ISO 4534:2010) has been prepared by Technical Committee ISO/TC 107 “Metallic and
other inorganic coatings” in collaboration with Technical Committee CEN/TC 262 “Metallic and other inorganic
coatings” the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by June 2011, and conflicting national standards shall be withdrawn at
the latest by June 2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 4534:2010 has been approved by CEN as a EN ISO 4534:2010 without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 4534:2011

---------------------- Page: 6 ----------------------

SIST EN ISO 4534:2011

INTERNATIONAL ISO
STANDARD 4534
Second edition
2010-12-15


Vitreous and porcelain enamels —
Determination of fluidity behaviour —
Fusion flow test
Émaux vitrifiés — Détermination du comportement de fluidité — Essai
d'écoulement




Reference number
ISO 4534:2010(E)
©
ISO 2010

---------------------- Page: 7 ----------------------

SIST EN ISO 4534:2011
ISO 4534:2010(E)
PDF disclaimer
This
...