SIST EN ISO 4534:2011
(Main)Vitreous and porcelain enamels - Determination of fluidity behaviour - Fusion flow test (ISO 4534:2010)
Vitreous and porcelain enamels - Determination of fluidity behaviour - Fusion flow test (ISO 4534:2010)
This International Standard specifies a comparative method of determining the fluidity behaviour of vitreous and porcelain enamels in the viscous condition during firing. It is not intended for use as an absolute method.
Emails und Emaillierungen - Prüfung des Fließverhaltens - Ablaufversuch (ISO 4534:2010)
Diese Internationale Norm legt ein Vergleichsverfahren für die Bestimmung des Fließverhaltens von Emails im
viskosen Zustand während des Brennens fest. Das Verfahren ist nicht für die Anwendung als
Absolutverfahren vorgesehen.
Émaux vitrifiés - Détermination du comportement de fluidité - Essai d'écoulement (ISO 4534:2010)
L'ISO 4534:2010 spécifie une méthode comparative de détermination du comportement de fluidité de l'émail vitrifié à l'état visqueux pendant la cuisson. Elle n'est pas destinée à servir de méthode absolue.
Steklasti in keramični emajli za aluminij - Ugotavljanje tekočnosti - Preskus toka taline (ISO 4534:2010)
Ta mednarodni standard določa primerjalno metodo za ugotavljanje tekočnosti steklastih in keramičnih emajlov v viskoznem stanju med žganjem. Ne uporablja se kot absolutna metoda.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 4534:2011
01-november-2011
6WHNODVWLLQNHUDPLþQLHPDMOL]DDOXPLQLM8JRWDYOMDQMHWHNRþQRVWL3UHVNXVWRND
WDOLQH ,62
Vitreous and porcelain enamels - Determination of fluidity behaviour - Fusion flow test
(ISO 4534:2010)
Emails und Emaillierungen - Prüfung des Fließverhaltens - Ablaufversuch (ISO
4534:2010)
Émaux vitrifiés - Détermination du comportement de fluidité - Essai d'écoulement (ISO
4534:2010)
Ta slovenski standard je istoveten z: EN ISO 4534:2010
ICS:
25.220.50 Emajlne prevleke Enamels
SIST EN ISO 4534:2011 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 4534:2011
---------------------- Page: 2 ----------------------
SIST EN ISO 4534:2011
EUROPEAN STANDARD
EN ISO 4534
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2010
ICS 25.220.50
English Version
Vitreous and porcelain enamels - Determination of fluidity
behaviour - Fusion flow test (ISO 4534:2010)
Émaux vitrifiés - Détermination du comportement de fluidité Emails und Emaillierungen - Prüfung des Fließverhaltens -
- Essai d'écoulement (ISO 4534:2010) Ablaufversuch (ISO 4534:2010)
This European Standard was approved by CEN on 14 December 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 4534:2010: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 4534:2011
EN ISO 4534:2010 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 4534:2011
EN ISO 4534:2010 (E)
Foreword
This document (EN ISO 4534:2010) has been prepared by Technical Committee ISO/TC 107 “Metallic and
other inorganic coatings” in collaboration with Technical Committee CEN/TC 262 “Metallic and other inorganic
coatings” the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by June 2011, and conflicting national standards shall be withdrawn at
the latest by June 2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 4534:2010 has been approved by CEN as a EN ISO 4534:2010 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 4534:2011
---------------------- Page: 6 ----------------------
SIST EN ISO 4534:2011
INTERNATIONAL ISO
STANDARD 4534
Second edition
2010-12-15
Vitreous and porcelain enamels —
Determination of fluidity behaviour —
Fusion flow test
Émaux vitrifiés — Détermination du comportement de fluidité — Essai
d'écoulement
Reference number
ISO 4534:2010(E)
©
ISO 2010
---------------------- Page: 7 ----------------------
SIST EN ISO 4534:2011
ISO 4534:2010(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
COPYRIGHT PROTECTED DOCUMENT
© ISO 2010
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2010 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 4534:2011
ISO 4534:2010(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 4534 was prepared by Technical Committee ISO/TC 107, Metallic and other inorganic coatings.
This second edition cancels and replaces the first edition (ISO 4534:1980), which has been technically revised.
The revised edition allows for the use of flow plates, other than unglazed ceramic tiles, such as enamelled
steel or cast iron which is common practice in some countries.
© ISO 2010 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 4534:2011
ISO 4534:2010(E)
Introduction
The fusion flow test specified in this International Standard is a comparative method which can be carried out
with simplified equipment to provide data on the fluidity behaviour of molten enamel. The results from this test
allow conclusions on the flow properties of the enamel to be inferred in a much simpler manner than is
possible from the results of the much more expensive measurements made using the usual viscosity-
measuring instruments.
1)
The results of extensive tests have shown that there is a well-defined relationship between the results of the
flow test and the viscosity-temperature curve, so that the flow test could also be used as an absolute method.
However, more effort would be required to enable the various laboratories to obtain comparable results of
similar quality than when using the method for comparative purposes.
When using this method, the reference (comparison) enamel must be similar to the enamel to be tested, as
the fluidity behaviour of the various types of enamel might vary considerably from one type to another.
1) Dekker, P. Calculation of viscosity-temperature curves for porcelain enamels from the flow-button test. Journal of the
American Ceramic Society, 48 (1965), 6, pp. 319 to 327.
iv © ISO 2010 – All rights reserved
---------------------- Page: 10 ----------------------
SIST EN ISO 4534:2011
INTERNATIONAL STANDARD ISO 4534:2010(E)
Vitreous and porcelain enamels — Determination of fluidity
behaviour — Fusion flow test
WARNING — This International Standard calls f
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.