EN ISO 10215:2010

Anodizing of aluminium and its alloys - Visual determination of image clarity of anodic oxidation coatings - Chart scale method (ISO 10215:2010)

ISO 10215:2010 specifies a visual method for determining the image clarity of anodic oxidation coatings on aluminium and aluminium alloys, using a chart scale and a lightness scale, which are defined. The method can be applied only to flat surfaces that can reflect the image of the chart scale pattern.

Anodisieren von Aluminium und Aluminiumlegierungen - Visuelle Bestimmung der Abbildungsschärfe von anodisch erzeugten Oxidschichten - Messgittermethode (ISO 10215:2010)

Diese Internationale Norm legt ein visuelles Verfahren zur Bestimmung der Abbildungsschärfe von anodisch
erzeugten Oxidschichten auf Aluminium und Aluminiumlegierungen fest, das ein Messgitter und eine
Helligkeitsskala verwendet. Die Prüfung kann nur auf einer ebenen Fläche angewendet werden, die das Bild des
Messgitters reflektieren kann.

Anodisation de l'aluminium et de ses alliages - Détermination de la netteté d'image sur couches anodiques - Méthode des échelles graduées (ISO 10215:2010)

L'ISO 10215:2010 spécifie une méthode visuelle pour la détermination de la netteté de l'image réfléchie par les couches anodiques déposées sur l'aluminium et les alliages d'aluminium, utilisant une échelle graduée et une échelle de clarté. La méthode n'est applicable qu'aux surfaces planes susceptibles de refléter l'image d'une échelle graduée type.

Anodizacija aluminija in aluminijeve zlitine - Vizualno ugotavljanje ostrine slike v anodizirani plasti - Metoda tabelarične lestvice (ISO 10215:2010)

Ta mednarodni standard določa vizualno metodo za ugotavljanje ostrine slike v anodizirani plasti na aluminiju in aluminijevih zlitinah z uporabo lestvice za ostrino in svetlost, ki sta opredeljeni. Metoda se lahko uporablja le za ploščate površine, ki lahko odsevajo sliko vzorca tabelarične lestvice.

General Information

• Status: Withdrawn
• Publication Date: 14-Aug-2010
• Withdrawal Date: 20-Mar-2018
• ICS: 25.220.20 - Surface treatment
• Technical Committee: CEN/TC 132 - Aluminium and aluminium alloys
• Drafting Committee: CEN/TC 132/WG 15 - Aluminium anodisation
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 21-Mar-2018
• Ref Project: SIST EN ISO 10215:2011 - Anodizing of aluminium and its alloys - Visual determination of image clarity of anodic oxidation coatings - Chart scale method (ISO 10215:2010)

Relations

• Replaces: EN 12373-14:2000 - Aluminium and aluminium alloys - Anodizing - Part 14: Visual determination of image clarity of anodic oxidation coatings - Chart scale method
• Effective Date: 22-Dec-2008
• Replaced By: EN ISO 10215:2018 - Anodizing of aluminium and its alloys - Visual determination of image clarity of anodic oxidation coatings - Chart scale method (ISO 10215:2018)
• Effective Date: 28-Mar-2018

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Anodisieren von Aluminium und Aluminiumlegierungen - Visuelle Bestimmung der Abbildungsschärfe von anodisch erzeugten Oxidschichten - Messgittermethode (ISO 10215:2010)Anodisation de l'aluminium et de ses alliages - Détermination de la netteté d'image sur couches anodiques - Méthode des échelles graduées (ISO 10215:2010)Anodizing of aluminium and its alloys - Visual determination of image clarity of anodic oxidation coatings - Chart scale method (ISO 10215:2010)77.120.10Aluminij in aluminijeve zlitineAluminium and aluminium alloys25.220.20Površinska obdelavaSurface treatmentICS:Ta slovenski standard je istoveten z:EN ISO 10215:2010SIST EN ISO 10215:2011en,fr,de01-maj-2011SIST EN ISO 10215:2011SLOVENSKI
STANDARDSIST EN 12373-14:20021DGRPHãþD



SIST EN ISO 10215:2011



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN ISO 10215
August 2010 ICS 25.220.20 Supersedes EN 12373-14:2000English Version
Anodizing of aluminium and its alloys - Visual determination of image clarity of anodic oxidation coatings - Chart scale method (ISO 10215:2010)
Anodisation de l'aluminium et de ses alliages - Détermination de la netteté d'image sur couches anodiques - Méthode des échelles graduées (ISO 10215:2010)
Anodisieren von Aluminium und Aluminiumlegierungen - Visuelle Bestimmung der Abbildungsschärfe von anodisch erzeugten Oxidschichten - Messgittermethode (ISO 10215:2010) This European Standard was approved by CEN on 14 August 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 10215:2010: ESIST EN ISO 10215:2011



EN ISO 10215:2010 (E) 2 Contents Page Foreword .3 SIST EN ISO 10215:2011



EN ISO 10215:2010 (E) 3 Foreword This document (EN ISO 10215:2010) has been prepared by Technical Committee ISO/TC 79 "Light metals and their alloys" in collaboration with Technical Committee CEN/TC 132 “Aluminium and aluminium alloys” the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2011, and conflicting national standards shall be withdrawn at the latest by February 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 12373-14:2000. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 10215:2010 has been approved by CEN as a EN ISO 10215:2010 without any modification.
SIST EN ISO 10215:2011



SIST EN ISO 10215:2011



Reference numberISO 10215:2010(E)© ISO 2010
INTERNATIONAL STANDARD ISO10215Second edition2010-08-15Anodizing of aluminium and its alloys — Visual determination of image clarity of anodic oxidation coatings — Chart scale method Anodisation de l'aluminium et de ses alliages — Détermination de la netteté d'image sur couches anodiques — Méthode des échelles graduées
SIST EN ISO 10215:2011



ISO 10215:2010(E) PDF disclaimer This PDF file may contain embedded type
...