EN 13763-18:2003

Explosives for civil uses - Detonators and relays - Part 18: Determination of series firing current of electric detonators

This European Standard specifies a method to determine the reliability of electric detonators connected in series, when the manufacturer’s stated series firing current is applied.
The test method does not apply to magnetic coupled detonators and electronic detonators.

Explosivstoffe für zivile Zwecke - Zünder und Verzögerungselemente - Teil 18: Bestimmung des Serienzündstromes elektrischer Zünder

Anwendungsbereich
Diese Norm beschreibt ein Verfahren für die Überprüfung des Serienzündstromes.
Das Verfahren ist nicht auf magnetisch gekoppelte Zünder anwendbar.

Explosifs à usage civil - Détonateurs et relais - Partie 18 : Détermination du courant d'allumage de détonateurs électriques en série

La présente Norme européenne spécifie une méthode permettant de déterminer la fiabilité des détonateurs électriques reliés en série, lorsque le courant d'allumage en série déclaré par le fabricant est appliqué.
La méthode d'essai ne s'applique pas aux détonateurs à couplage magnétique et aux détonateurs électroniques.

Eksplozivi za civilno uporabo – Detonatorji in zakasnilniki – 18. del: Ugotavljanje toka za serijski vžig električnega detonatorja

General Information

• Status: Published
• Publication Date: 16-Dec-2003
• Withdrawal Date: 29-Jun-2004
• ICS: 71.100.30 - Explosives. Pyrotechnics and fireworks
• Technical Committee: CEN/TC 321 - Explosives for civil uses
• Drafting Committee: CEN/TC 321/WG 4 - Detonators and relays
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 30-Jul-2015
• Directive: 2014/28/EU - Directive 2014/28/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market and supervision of explosives for civil uses
• Directive: 93/15/EEC - Council Directive 93/15/EEC of 5 April 1993 on the harmonization of the provisions relating to the placing on the market and supervision of explosives for civil uses
• Mandate: M/055 - Standardization mandate to CEN for explosives for civil uses
• Ref Project: SIST EN 13763-18:2004 - Explosives for civil uses - Detonators and relays - Part 18: Determination of series firing current of electric detonators

Relations

• Revised: FprEN 13763-18 - Explosives for civil uses - Detonators and detonating cord relays - Part 18: Verification of the series firing current for electric detonators
• Effective Date: 18-Jan-2023

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Explosivstoffe für zivile Zwecke - Zünder und Verzögerungselemente - Teil 18: Bestimmung des Serienzündstromes elektrischer ZünderExplosifs a usage civil - Détonateurs et relais - Partie 18: Détermination du courant d'allumage de détonateurs électriques en sérieExplosives for civil uses - Detonators and relays - Part 18: Determination of series firing current of electric detonators71.100.30Eksplozivi. PirotehnikaExplosives. PyrotechnicsICS:Ta slovenski standard je istoveten z:EN 13763-18:2003SIST EN 13763-18:2004en01-februar-2004SIST EN 13763-18:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13763-18December 2003ICS 71.100.30English versionExplosives for civil uses - Detonators and relays - Part 18:Determination of series firing current of electric detonatorsExplosifs à usage civil - Détonateurs et relais - Partie 18:Détermination du courant d'allumage de détonateursélectriques en sérieExplosivstoffe für zivile Zwecke - Zünder undVerzögerungselemente - Teil 18: Bestimmung desSerienzündstromes elektrischer ZünderThis European Standard was approved by CEN on 10 November 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13763-18:2003 E

Range of applicability of the test method.8Annex ZA (informative)
Clauses of this European Standard addressing essential requirements or otherprovisions of EU Directives.9
...