EN ISO 14273:2001

Specimen dimensions and procedure for shear testing resistance spot, seam and embossed projection welds (ISO 14273:2000)

UAP launched on 2000-03-09 but withdrawn (CC/000823)++TC forecasts updated (TCforecasts updating exercise.sj 00-11-14)++

Probenmaße und Verfahren für die Scherzugprüfung an Winderstandspunkt-, Rollennaht- und Buckelschweißungen mit geprägten Buckeln (ISO 14273:2000)

Diese Internationale Norm beschreibt Probenmaße und das Verfahren für die Scherzugprüfung an Punkt-, Rollennaht- und Buckelschweißverbindungen mit geprägten Buckeln an überlappten Blechen aus beliebigen metallischen Werkstoffen, der Blechdicke von 0,5 mm bis 10 mm, wobei die Schweißungen einen maximalen Durchmesser von   haben (t ist die Blechdicke in mm). Bei Schweißungen mit Durchmessern >   und £   kann der Wert der Scherzugfestigkeit zu klein bewertet sein, wenn die empfohlenen Probenmaße benutzt werden.
Das Ziel der Scherzugprüfung ist, die Scherzugkraft zu bestimmen, die die Proben ertragen kann.

Dimensions des éprouvettes et mode opératoire pour l'essai de cisaillement des soudures par résistance par points, à la molette et par bossages (ISO 14273:2000)

Mere preskušancev in postopek za strižno preskušanje uporovnih točkovnih, kolutnih in bradavičnih zvarov (ISO 14273:2000)

General Information

• Status: Withdrawn
• Publication Date: 23-Oct-2001
• Withdrawal Date: 22-Mar-2016
• ICS: 25.160.40 - Welded joints and welds
• Technical Committee: CEN/TC 121 - Welding
• Drafting Committee: CEN/TC 121/WG 21 - Testing of welds
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 23-Mar-2016
• Ref Project: SIST EN ISO 14273:2002 - Specimen dimensions and procedure for shear testing resistance spot, seam and embossed projection welds (ISO 14273:2000)

Relations

• Replaced By: EN ISO 14273:2016 - Resistance welding - Destructive testing of welds - Specimen dimensions and procedure for tensile shear testing resistance spot and embossed projection welds (ISO 14273:2016)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.þNRYQLKProbenmaße und Verfahren für die Scherzugprüfung an Winderstandspunkt-, Rollennaht- und Buckelschweißungen mit geprägten Buckeln (ISO 14273:2000)Dimensions des éprouvettes et mode opératoire pour l'essai de cisaillement des soudures par résistance par points, a la molette et par bossages (ISO 14273:2000)Specimen dimensions and procedure for shear testing resistance spot, seam and embossed projection welds (ISO 14273:2000)25.160.40Varjeni spoji in variWelded jointsICS:Ta slovenski standard je istoveten z:EN ISO 14273:2001SIST EN ISO 14273:2002en01-maj-2002SIST EN ISO 14273:2002SLOVENSKI
STANDARD



SIST EN ISO 14273:2002



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN ISO 14273October 2001ICS 25.160.40English versionSpecimen dimensions and procedure for shear testingresistance spot, seam and embossed projection welds (ISO14273:2000)Dimensions des éprouvettes et mode opératoire pourl'essai de cisaillement des soudures par résistance parpoints, à la molette et par bossages (ISO 14273:2000)Probenmaße und Verfahren für die Scherzugprüfung anWinderstandspunkt-, Rollennaht- und Buckelschweißungenmit geprägten Buckeln (ISO 14273:2000)This European Standard was approved by CEN on 3 October 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN ISO 14273:2001 ESIST EN ISO 14273:2002



EN ISO 14273:2001 (E)2CORRECTED 2002-01-02ForewordThe text of the International Standard from Technical Committee IIW has been taken over as aEuropean Standard by Technical Committee CEN/TC 121 "Welding", the secretariat of which is held byDS.This European Standard shall be given the status of a national standard, either by publication of anidentical text or by endorsement, at the latest by April 2002, and conflicting national standards shall bewithdrawn at the latest by April 2002.According to the CEN/CENELEC Internal Regulations, the national standards organizations of thefollowing countries are bound to implement this European Standard: Austria, Belgium, Czech Republic,Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands,Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom.Endorsement noticeThe text of the International Standard ISO 14273:2000 has been approved by CEN as a EuropeanStandard without any modifications.NOTE
Normative references to International Standards are listed in annex ZA (normative).SIST EN ISO 14273:2002



EN ISO 14273:2001 (E)3Annex ZA(normative)Normative references to international publicationswith their relevant European publicationsThis European Standard incorporates by dated or undated reference, provisions from other publications.These normative references are cited at the appropriate places in the text and the publications are listedhereafter. For dated references, subsequent amendments to or revisions of -any of these publicationsapply to this European Standard only when incorporated in it by amendment or revision. For undatedreferences the latest edition of the publication referred to applies (including amendments).NOTE Where an International Publication has been modified by common modifications, indicated by(mod.), the relevant EN/HD applies.PublicationYearTitleENYearISO 7500-11999Metallic materials - Verification ofstatic uniaxial testing machines -Part 1: Tension/compression testingmachinesEN ISO 7500-11999SIST EN ISO 14273:2002



SIST EN ISO 14273:2002



ReferencenumberISO14273:2000(E)©ISO2000INTERNATIONALSTANDARDISO14273Firstedition2000-11-01Specimendimensionsandprocedureforsheartestingresistancespot,seamandembossedprojectionweldsDimensionsdeséprouvettesetmodeopératoirepourl'essaidecisaillementdessouduresparrésistanceparpoints,àlamoletteetparbossagesSIST EN ISO 14273:2002



ISO14273:2000(E)PDFdisclaimerThisPDFfilemaycontainembeddedtypefaces.Ina
...