EN 13891:2003

Tensional strapping - Guide to selection and use of tensional strapping

This European Standard gives guidance on the selection and use of steel and non-metallic tensional strapping.  The term steel strapping covers flat band strapping. Non-metallic strapping covers weftless strapping and extruded thermoplastic strapping.
NOTE 1   EN 13246 specifies the breaking strength and dimensional tolerances of steel strapping and gives guidance on surface finishes of steel strapping.
NOTE 2   EN13394 specifies the dimensional tolerances and tensile properties of non-metallic tensional strapping and weftless (textile) strapping and gives guidance on surface finishes available.

Umreifungsbänder - Auswahl und Anwendung

Die vorliegende Norm EN xxxxx gibt Hilfe und Anleitung bei der Auswahl und Verwendung von Stahl- und nichtmetallischen Umreifungsbändern. Der Ausdruck "Stahlumreifungsband" bezieht sich auf Flachband. Nichtmetallische Umreifungsbänder sind solche aus gewebefreien Bändern und extrudierten, thermoplastischen Umreifungsbändern.

Feuillards de cerclage - Guide pour la sélection et l'utilisation des feuillards de cerclage

La présente Norme européenne donne un certain nombre de directives sur la sélection et l'utilisation de feuillards de cerclage d'acier et non métalliques. Le terme feuillard d'acier couvre les feuillards à bande plate. Les feuillards non métalliques couvrent les feuillards textiles sans trame et les feuillards en thermoplastique extrudé.
NOTE 1   L'EN 13246 spécifie la résistance à la rupture et les tolérances dimensionnelles des feuillards d'acier et donne des directives sur les finis de surface des feuillards d'acier.
NOTE 2   L'EN 13394 spécifie les tolérances dimensionnelles et les propriétés mécaniques de traction des feuillards de cerclage non métalliques et des feuillards (textiles) sans trame, et donne des directives sur les finis de surface disponibles.

Povezovalni trakovi – Vodilo za izbiro in uporabo povezovalnih trakov

General Information

• Status: Published
• Publication Date: 03-Jun-2003
• Withdrawal Date: 30-Dec-2003
• ICS: 55.040 - Packaging materials and accessories
• Technical Committee: CEN/TC 261 - Packaging
• Drafting Committee: CEN/TC 261/SC 5 - Primary packaging and transport packaging
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 29-Jan-2020
• Ref Project: SIST EN 13891:2003 - Tensional strapping - Guide to selection and use of tensional strapping

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Povezovalni trakovi – Vodilo za izbiro in uporabo povezovalnih trakovUmreifungsbänder - Auswahl und AnwendungFeuillards de cerclage - Guide pour la sélection et l'utilisation des feuillards de cerclageTensional strapping - Guide to selection and use of tensional strapping55.040SDNLUDQMHPackaging materials and accessoriesICS:Ta slovenski standard je istoveten z:EN 13891:2003SIST EN 13891:2003en01-oktober-2003SIST EN 13891:2003SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13891June 2003ICS 55.040English versionTensional strapping - Guide to selection and use of tensionalstrappingCerclages sous tension - Guide pour la sélection etl'utilisation de cerclages sous tensionUmreifungsbänder - Auswahl und AnwendungThis European Standard was approved by CEN on 21 April 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13891:2003 ESIST EN 13891:2003

Suppliers should be consulted to advise on the suitability of strapping tomeet the requirements of specific application equipment.3.2 For use with semi-automatic, automatic and automated types of strappingThe types of equipment recommended for use with semi-automatic, automatic and automated types of strappingequipment are classified as follows.a) Semi-automatic: Machinery, generally static, which does not have a strap chute for feeding strapping aroundthe article to be strapped. Feeding is by hand, the machine operator placing the leading end of a strap into themechanism so that the remaining operations of the cycle, i.e. tensioning, sealing and cutting off, can becompleted automatically.b) Automatic: Machinery with a fixed track for feeding the strapping. All operations of the complete strapping cycleare carried out on activation of the start control.c) Automated: Automatic machinery with additional electronic or other controls and a powered method ofpresenting packs to the strapping machine. An automated system could be capable, without the presence ofan operator, of
...