EN 13468:2001

Thermal insulating products for building equipment and industrial installations - Determination of trace quantities of water soluble chloride, fluoride, silicate, sodium ions and pH

This standard speci-fies the equipment and procedures for determi-ning trace quantities of the water soluble chloride, fluoride, silicate and sodium ions in an aqueous extract of the product. It also describes a procedure for the determination of the pH of the aqueous extract. The standard is applicable to thermal insula-ting products.
NOTE   The determination of these parameters may be relevant for thermal insula-ting products intended for application to stainless austenitic steel surfa-ces. The presence of chloride, fluoride, silicate and sodium ions under certain conditions may influen-ce the risk of stress corrosion cracking. See informative annex B for further information.

Wärmedämmstoffe für die Haustechnik und für betriebstechnische Anlagen - Bestimmung des Gehalts von wasserlöslichen Chlorid-, Fluorid-, Silikat- und Natrium-Ionen und des pH-Wertes

Anwendungsbereich
Diese Europäische Norm legt Prüfeinrichtungen und Verfahren zur Bestimmung des Gehalts von wasserlöslichen Chlorid-, Fluorid-, Silikat- und Natrium-Ionen eines wässrigen Extrakts des Produkts fest. Sie beschreibt außerdem ein Verfahren zur Bestimmung des pH-Wertes des wässrigen Extrakts. Die Norm gilt für Wärmedämmstoffe.
ANMERKUNG   Die Bestimmung dieser Parameter kann für Wärmedämmstoffe relevant sein, die zur Anwendung auf Oberflächen aus austenitischem, nicht rostendem Stahl vorgesehen sind. Die Anwesenheit von Chlorid-, Fluorid-, Silikat- und Natrium-Ionen kann unter bestimmten Bedingungen das Risiko der Spannungs-risskorro-sion beein-flussen. Der informative Anhang B enthält weitere Informatio-nen.

Produits isolants thermiques pour l'équipement du bâtiment et les installations industrielles - Détermination des faibles quantités d'ions chlorure, fluorure, silicate et sodium solubles dans l'eau et mesure du pH

Cette norme spécifie les équipements nécessaires et les procédures à suivre pour déterminer les faibles quantités d'ions chlorure, fluorure, silicate et sodium solubles dans l'eau, ainsi que le pH d'un extrait aqueux du produit. Elle s'applique aux produits isolants thermiques.
NOTE   La détermination de ces paramètres peut s'appliquer aux produits isolants thermiques appliqués sur des surfaces d'acier inoxydable austénitique. La présence d'ions chlorure, fluorure, silicate et sodium sous certaines conditions peut avoir une influence sur les risques de fissuration par corrosion sous contrainte. Voir l'annexe B pour plus d'informations.

Toplotnoizolacijski proizvodi za opremo stavb in industrijske inštalacije – Ugotavljanje sledi vodotopnih klorovih, fluorovih, silikatnih in natrijevih ionov ter pH vrednosti

General Information

• Status: Withdrawn
• Publication Date: 18-Sep-2001
• Withdrawal Date: 06-Sep-2022
• ICS: 91.100.60 - Thermal and sound insulating materials
• Technical Committee: CEN/TC 88 - Thermal insulating materials and products
• Drafting Committee: CEN/TC 88/WG 10 - Building equipment and industrial installations
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 07-Sep-2022
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/103 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on thermal insulating products
• Ref Project: SIST EN 13468:2002 - Thermal insulating products for building equipment and industrial installations - Determination of trace quantities of water soluble chloride, fluoride, silicate, sodium ions and pH

Relations

• Replaced By: EN ISO 12624:2022 - Thermal insulating products for building equipment and industrial installations - Determination of trace quantities of water-soluble chloride, fluoride, silicate, sodium ions and pH (ISO 12624:2022)
• Effective Date: 22-Jul-2020

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 13468:2002
01-marec-2002
Toplotnoizolacijski proizvodi za opremo stavb in industrijske inštalacije –
Ugotavljanje sledi vodotopnih klorovih, fluorovih, silikatnih in natrijevih ionov ter
pH vrednosti
Thermal insulating products for building equipment and industrial installations -
Determination of trace quantities of water soluble chloride, fluoride, silicate, sodium ions
and pH
Wärmedämmstoffe für die Haustechnik und für betriebstechnische Anlagen -
Bestimmung des Gehalts von wasserlöslichen Chlorid-, Fluorid-, Silikat- und Natrium-
Ionen und des pH-Wertes
Produits isolants thermiques pour l'équipement du bâtiment et les installations
industrielles - Détermination des faibles quantités d'ions chlorure, fluorure, silicate et
sodium solubles dans l'eau et mesure du pH
Ta slovenski standard je istoveten z: EN 13468:2001
ICS:
91.100.60 0DWHULDOL]DWRSORWQRLQ Thermal and sound insulating
]YRþQRL]RODFLMR materials
SIST EN 13468:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 13468:2002

---------------------- Page: 2 ----------------------

SIST EN 13468:2002
EUROPEAN STANDARD
EN 13468
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2001
ICS 91.100.60
English version
Thermal insulating products for building equipment and industrial
installations - Determination of trace quantities of water soluble
chloride, fluoride, silicate, sodium ions and pH
Produits isolants thermiques pour l'équipement du bâtiment Wärmedämmstoffe für die Haustechnik und für
et les installations industrielles - Détermination des faibles betriebstechnische Anlagen - Bestimmung des Gehalts von
quantités d'ions chlorure, fluorure, silicate et sodium wasserlöslichen Chlorid-, Fluorid-, Silikat- und Natrium-
solubles dans l'eau et mesure du pH Ionen und des pH-Wertes
This European Standard was approved by CEN on 18 August 2001.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2001 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13468:2001 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 13468:2002
EN 13468:2001 (E)
Contents
page
Foreword .3
1 Scope.4
2 Normative references.4
3 Terms and definitions .4
4 Principle .4
5 Apparatus.4
6 Test specimens.5
7 Procedure.6
8 Calculation and expression of results .9
9 Accuracy of measurement .11
10 Test report .
...