EN 10357:2013

Austenitic, austenitic-ferritic and ferritic longitudinally welded stainless steel tubes for the food and chemical industry

This European Standard specifies dimensions, tolerances, materials, internal and external surface characteristics, and marking of stainless steels longitudinally fusion welded tubes for the food and chemical industry.

Austenitische, austenitisch-ferritische und ferritische längsnahtgeschweißte Rohre aus nichtrostendem Stahl für die Lebensmittel- und chemische Industrie

Diese Europäische Norm legt die Maße, Grenzabmaße, Toleranzen, die Werkstoffe, sowie die inneren und äußeren Oberflächeneigenschaften und die Kennzeichnung von längsnahtgeschweißten Rohren aus nichtrostenden Stählen für die Lebensmittel- und chemische Industrie fest.

Tubes soudés longitudinalement en acier inoxydable austénitique, ferritique et austéno-ferritique pour l'industrie alimentaire et chimique

La présente Norme européenne spécifie les dimensions, les tolérances, les matériaux, les caractéristiques de surface interne et externe et le marquage des tubes soudés longitudinalement en acier inoxydable pour l'industrie alimentaire et l'industrie chimique.

Avstenitne, avstenitno-feritne in feritne vzdolžno varjene cevi iz nerjavnega jekla za prehrambno in kemično industrijo

Standard EN 10357 določa mere, tolerance, materiale, značilnosti notranje in zunanje površine ter označevanje vzdolžno varjenih cevi iz nerjavnega jekla za prehrambeno in kemično industrijo.

General Information

• Status: Withdrawn
• Publication Date: 10-Dec-2013
• Withdrawal Date: 23-Aug-2022
• ICS: 23.040.10 - Iron and steel pipes
• Technical Committee: ECISS/TC 110 - Steel tubes, and iron and steel fittings
• Drafting Committee: ECISS/TC 29 - Steel tubes and fittings for steel tubes
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 24-Aug-2022
• Ref Project: SIST EN 10357:2014 - Austenitic, austenitic-ferritic and ferritic longitudinally welded stainless steel tubes for the food and chemical industry

Relations

• Replaced By: EN 10357:2022 - Austenitic, austenitic-ferritic and ferritic longitudinally welded stainless steel tubes for the food and chemical industry
• Effective Date: 04-Mar-2020

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Austenitische, austenitisch-ferritische und ferritische längsnahtgeschweißte Rohre aus nichtrostendem Stahl für die Lebensmittel- und chemische IndustrieAusténitiques, ferritiques et austéno-ferritiques Tubes soudés longitudinalement en acier inoxydable pour l'industrie alimentaire et chimiqueAustenitic, austenitic-ferritic and ferritic longitudinally welded stainless steel tubes for the food and chemical industry77.140.75Jeklene cevi in cevni profili za posebne nameneSteel pipes and tubes for specific useICS:Ta slovenski standard je istoveten z:EN 10357:2013SIST EN 10357:2014en,fr,de01-julij-2014SIST EN 10357:2014SLOVENSKI
STANDARD



SIST EN 10357:2014



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 10357
December 2013 ICS 23.040.10 English Version
Austenitic, austenitic-ferritic and ferritic longitudinally welded stainless steel tubes for the food and chemical industry
Austénitiques, ferritiques et austéno-ferritiques Tubes soudés longitudinalement en acier inoxydable pour l'industrie alimentaire et chimique
Austenitische, austenitisch-ferritische und ferritische längsnahtgeschweißte Rohre aus nichtrostendem Stahl für die Lebensmittel- und chemische Industrie This European Standard was approved by CEN on 5 October 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 10357:2013 ESIST EN 10357:2014



EN 10357:2013 (E) 2 Contents Page Foreword .3 1 Scope .4 2 Normative references .4 3 Dimensions and tolerances .4 3.1 Dimensions and tolerances for tubes.4 3.2 Straightness .7 4 Information to be supplied by the purchaser .7 4.1 Mandatory information .7 4.2 Example of an order .7 5 Materials .7 6 Manufacturing process, requirements and surface characteristics .8 7 Testing and inspection documents .8 8 Marking .9 9 Packaging and transport .9 Annex A (informative)
Responsibility on selection of material . 10 Bibliography
...