EN 13880-3:2003

Hot applied joint sealants - Part 3: Test method for the determination of penetration and recovery (resilience)

This European Standard describes a method for determining of the penetration and recovery (resilience) of hot applied joint sealants using a standard penetrometer fitted with a ball penetration tool.

Heiß verarbeitbare Fugenmassen - Teil 3: Prüfverfahren zur Bestimmung der Kugel-Penetration und des elastischen Rückstellvermögens

Diese Europäische Norm beschreibt ein Verfahren zur Bestimmung der Kugel-Penetration und des elastischen Rückstellvermögens von heiß verarbeitbaren Fugenmassen mit Hilfe eines mit einem kugelförmigen Eindringkörper ausgerüsteten genormten Penetrometers.

Produits de scellement de joints appliqués à chaud - Partie 3 : Méthode d'essais pour la détermination de la pénétrabilité et du retour élastique

Cette Norme européenne décrit une méthode pour la détermination de la pénétration et du retour élastique (ou résilience) des produits de scellement de joints appliqués à chaud à l'aide d'un pénétromètre standard muni d'un outil de pénétration à la bille.

Toplo nanosljive tesnilne mase za stike – 3. del: Preskusna metoda za ugotavljanje penetracije in sposobnosti vrnitve v prvotno stanje

General Information

• Status: Published
• Publication Date: 10-Jun-2003
• Withdrawal Date: 30-Mar-2005
• ICS: 93.080.20 - Road construction materials
• Technical Committee: CEN/TC 227 - Road materials
• Drafting Committee: CEN/TC 227/WG 3 - Materials for concrete roads including joint fillers and sealants
• Current Stage: 9092 - Decision on results of review/2YR ENQ - revise - Review Enquiry
• Completion Date: 04-Apr-2022
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/124 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on road construction products
• Ref Project: SIST EN 13880-3:2004 - Hot applied joint sealants - Part 3: Test method for the determination of penetration and recovery (resilience)

Relations

• Revised: FprEN 13880-3 - Hot applied joint sealants - Part 3: Test method for the determination of penetration and recovery (resilience)
• Effective Date: 19-Jan-2023

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Toplo nanosljive tesnilne mase za stike – 3. del: Preskusna metoda za ugotavljanje penetracije in sposobnosti vrnitve v prvotno stanjeHeiß verarbeitbare Fugenmassen - Teil 3: Prüfverfahren zur Bestimmung der Kugel-Penetration und des elastischen RückstellvermögensProduits de scellement de joints appliqués a chaud - Partie 3 : Méthode d'essais pour la détermination de la pénétrabilité et du retour élastiqueHot applied joint sealants - Part 3: Test method for the determination of penetration and recovery (resilience)93.080.20Materiali za gradnjo cestRoad construction materials91.100.50Veziva. Tesnilni materialiBinders. Sealing materialsICS:Ta slovenski standard je istoveten z:EN 13880-3:2003SIST EN 13880-3:2004en01-junij-2004SIST EN 13880-3:2004SLOVENSKI
STANDARD



SIST EN 13880-3:2004



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13880-3June 2003ICS 93.080.20English versionHot applied joint sealants - Part 3: Test method for thedetermination of penetration and recovery (resilience)Produits de scellement de joints appliqués à chaud - Partie3: Méthode d'essais pour la détermination de lapénétrabilité et du retour élastiqueHeiß verarbeitbare Fugenmassen - Teil 3: Prüfverfahrenzur Bestimmung der Kugel-Penetration und des elastischenRückstellvermögensThis European Standard was approved by CEN on 25 March 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13880-3:2003 ESIST EN 13880-3:2004



EN 13880-3:2003 (E)2ContentspageForeword.31Scope.42Normative references.43Term and definition.44Principle.45Apparatus.45.1Penetrometer.45.2Ball penetration tool.45.3Water bath.55.4Sample Tins.56Preparation and conditioning of the test specimens.57Test conditions.68Procedure.69Expression of results.710Oven aged specimens.
...