EN ISO 11252:2013

Lasers and laser-related equipment - Laser device - Minimum requirements for documentation (ISO 11252:2013)

ISO 11252:2013 specifies the minimum documentation, marking and labelling for all laser products classified in accordance with IEC 60825-1 including laser diodes and all laser devices defined in ISO 11145.
It is applicable to laser systems being integrated in a laser product in accordance with IEC 60825-1 and laser devices being integrated in a laser unit or processing machine in accordance with ISO 11553-1 and ISO 11553-2.
ISO 11252:2013 specifies requirements for technical data sheets and information for the user.
The requirements in ISO 11252:2013 augment but do not supersede any of the requirements in IEC 60825-1.

Laser und Laseranlagen - Lasergerät - Mindestanforderungen an die Dokumentation (ISO 11252:2013)

Lasers et équipements associés aux lasers - Source laser - Exigences minimales pour la documentation (ISO 11252:2013)

L'ISO 11252:2013 spécifie la documentation minimale, le marquage et l'étiquetage pour tous les appareils lasers classés dans la CEI 60825-1, y compris les diodes lasers et les dispositifs laser définis dans l'ISO 11145.
Elle s'applique à des systèmes laser intégrés dans un appareil à laser selon la CEI 60825-1 et aux dispositifs à laser intégrés à une unité de traitement au laser selon l'ISO 11553-1 et l'ISO 11553-2.
L'ISO 11252:2013 spécifie les exigences pour les fiches techniques et les informations pour l'utilisateur.
Les exigences de l'ISO 11252:2013 augmentent mais ne remplacent pas celles de la CEI 60825-1.

Laserji in laserska oprema - Laserska naprava - Minimalne zahteve za dokumentacijo (ISO 11252:2013)

Ta mednarodni standard določa minimalno dokumentacijo, označevanje in etiketiranje za vse laserske izdelke, klasificirane v skladu s standardom IEC 60825-1, vključno z laserskimi diodami in vsemi laserskimi napravami iz standarda ISO 11145. Uporablja se za laserske sisteme, ki so vgrajeni v laserski izdelek v skladu s standardom IEC 60825-1, in laserske naprave, ki so vgrajene v lasersko enoto ali stroj za obdelavo v skladu s standardoma ISO 11553-1 in ISO 11553-2. Ta mednarodni standard se ne uporablja za popolne laserske izdelke (pripravljene za uporabo), vgrajene laserske izdelke brez zunanje laserske emisije z zaščitno ogrado ali laserske obdelovalne stroje, ki vključujejo lasersko napravo. Ta mednarodni standard se ne uporablja za nekoherentne svetilke in druge podobne vire, kot so diode LED, ki so potrebne za uskladitev s standardom IEC 62471. Ta mednarodni standard določa zahteve za tehnične liste (glej točko 5) in informacije za uporabnika (glej točko 6). Zahteve v tem mednarodnem standardu dopolnjujejo, vendar ne nadomeščajo nobene zahteve v standardu IEC 60825-1.

General Information

• Status: Published
• Publication Date: 06-Aug-2013
• Withdrawal Date: 27-Feb-2014
• ICS: 31.260 - Optoelectronics. Laser equipment
• Technical Committee: CEN/TC 123 - Lasers and photonics
• Drafting Committee: CEN/TC 123 - Lasers and photonics
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 07-Aug-2013
• Completion Date: 07-Aug-2013
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Directive: 2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
• Directive: 2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
• Directive: 98/37/EC - Machinery
• Mandate: M/079 - Mandate to CEN and CENELEC for standardization in the field of machines
• Mandate: M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
• Ref Project: SIST EN ISO 11252:2013 - Lasers and laser-related equipment - Laser device - Minimum requirements for documentation (ISO 11252:2013)

Relations

• Replaces: EN ISO 11252:2008 - Lasers and laser-related equipment - Laser device - Minimum requirements for documentation (ISO 11252:2004)
• Effective Date: 28-Aug-2013
• Revised: EN ISO 11252:2004 - Lasers and laser-related equipment - Laser device - Minimum requirements for documentation (ISO 11252:2004)
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 11252:2013
01-november-2013
1DGRPHãþD
SIST EN ISO 11252:2008
Laserji in laserska oprema - Laserska naprava - Minimalne zahteve za
dokumentacijo (ISO 11252:2013)
Lasers and laser-related equipment - Laser device - Minimum requirements for
documentation (ISO 11252:2013)
Laser und Laseranlagen - Lasergerät - Mindestanforderungen an die Dokumentation
(ISO 11252:2013)
Lasers et équipements associés aux lasers - Source laser - Exigences minimales pour la
documentation (ISO 11252:2013)
Ta slovenski standard je istoveten z: EN ISO 11252:2013
ICS:
31.260 Optoelektronika, laserska Optoelectronics. Laser
oprema equipment
SIST EN ISO 11252:2013 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 11252:2013

---------------------- Page: 2 ----------------------

SIST EN ISO 11252:2013


EUROPEAN STANDARD
EN ISO 11252

NORME EUROPÉENNE

EUROPÄISCHE NORM
August 2013
ICS 31.260 Supersedes EN ISO 11252:2004
English Version
Lasers and laser-related equipment - Laser device - Minimum
requirements for documentation (ISO 11252:2013)
Lasers et équipements associés aux lasers - Source laser - Laser und Laseranlagen - Lasergerät -
Exigences minimales pour la documentation (ISO Mindestanforderungen an die Dokumentation (ISO
11252:2013) 11252:2013)
This European Standard was approved by CEN on 7 March 2013.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11252:2013: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 11252:2013
EN ISO 11252:2013 (E)
Contents Page
Foreword .3
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 2006/42/EC (Machinery) .4

2

---------------------- Page: 4 ----------------------

SIST EN ISO 11252:2013
EN ISO 11252:2013 (E)
Foreword
This document (EN ISO 11252:2013) has been prepared by Technical Committee ISO/TC 172 "Optics and
photonics" in collaboration with Technical Committee CEN/TC 123 “Lasers and photonics” the secretariat of
which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by February 2014, and conflicting national standards shall be withdrawn
at the latest by February 2014.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 11252:2004.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive.
For relationship with EU Directive, see informative Annex ZA, which is an integral part of this document.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
...