iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 13087-2:2012

(Main)

Protective helmets - Test methods - Part 2: Shock absorption

Protective helmets - Test methods - Part 2: Shock absorption

The European Standard specifies methods of test for protective helmets. The purpose of these tests is to enable assessment of the performance of the helmet as specified in the appropriate helmet standard.
This European Standard specifies the method for determination of shock absorption.

Schutzhelme - Prüfverfahren - Teil 2: Stoßdämpfung

Die Europäische Norm legt Prüfverfahren für Schutzhelme fest. Zweck dieser Prüfungen ist die Beurteilung der Gebrauchstauglichkeit des Helmes, wie es in der entsprechenden Norm für Helme festgelegt ist.
Diese Europäische Norm legt das Verfahren zur Bestimmung der Stoßdämpfung fest.

Casques de protection - Méthodes d'essai - Partie 2: Absorption des chocs

La présente Norme européenne décrit des méthodes d'essai pour les casques de protection. Ces essais sont destinés à permettre l’évaluation de la performance du casque spécifiée dans la norme de casque appropriée.
La présente partie de l'EN 13087 spécifie la méthode pour la détermination de l'absorption des chocs.

Varovalne čelade - Preskusne metode - 2. del: Absorpcija udarca

Ta evropski standard določa preskusne metode za varovalne čelade. Namen teh preskusov je omogočiti oceno lastnosti čelade, kot je določeno v ustreznem standardu za čelado. Ta evropski standard določa metodo za določevanje absorpcije udarcev.

General Information

Status
Published
Publication Date
07-Feb-2012
ICS
13.340.20 - Head protective equipment
Technical Committee
CEN/TC 158 - Head protection
Drafting Committee
CEN/TC 158/WG 11 - Headforms and test methods
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
18-Dec-2023
Directive
2016/425 - Regulation (EU) 2016/425 of the European Parliament and of the Council of 9 March 2016 on personal protective equipment and repealing Council Directive 89/686/EEC
89/686/EEC - Council Directive 89/686/EEC of 21 December 1989 on the approximation of the laws of the Member States relating to personal protective equipment
Mandate
M/031 - Standardization mandate to CEN/CENELEC concerning standards for Personal Protective Equipment
Ref Project
SIST EN 13087-2:2012 - Protective helmets - Test methods - Part 2: Shock absorption

Relations

Replaces
EN 13087-2:2000/A1:2001 - Protective helmets - Test methods - Part 2: Shock absorption
Effective Date
15-Feb-2012
Replaces
EN 13087-2:2000 - Protective helmets - Test methods - Part 2: Shock absorption
Effective Date
15-Feb-2012

Buy Standard

EN 13087-2:2012EN 13087-2:2012
PreviousNext
Standard
EN 13087-2:2012
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Schutzhelme - Prüfverfahren - Teil 2: StoßdämpfungCasques de protection - Méthodes d'essai - Partie 2: Absorption des chocsProtective helmets - Test methods - Part 2: Shock absorption13.340.20Varovalna oprema za glavoHead protective equipmentICS:Ta slovenski standard je istoveten z:EN 13087-2:2012SIST EN 13087-2:2012en,fr,de01-julij-2012SIST EN 13087-2:2012SLOVENSKI
STANDARDSIST EN 13087-2:2000/A1:2002SIST EN 13087-2:20001DGRPHãþD



SIST EN 13087-2:2012



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13087-2
February 2012 ICS 13.340.20 Supersedes EN 13087-2:2000English Version
Protective helmets - Test methods - Part 2: Shock absorption
Casques de protection - Méthodes d'essai - Partie 2: Absorption des chocs
Schutzhelme - Prüfverfahren - Teil 2: Stoßdämpfung This European Standard was approved by CEN on 17 December 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13087-2:2012: ESIST EN 13087-2:2012



EN 13087-2:2012 (E) 2 Contents Page Foreword .3Introduction .41Scope .52Normative references .53Terms and definitions .54Prerequisites .55Test methods .65.1General .65.2Falling mass method .65.2.1Principle .65.2.2Apparatus .65.2.3Procedure .75.2.4Test report .75.3Falling headform method .75.3.1Principle .75.3.2Apparatus .75.3.3Procedure .9
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
CEN/TS 17946:2023(Main)
Helmets for S-EPAC riders
SIST-TS CEN/TS 17946:2023

This document specifies requirements and test methods for helmets worn by users of speed electrically power assisted bicycles (S-EPACs). This document also specifies requirements and test methods for integrated visors in helmets worn by users of S-EPACS.
Requirements and the corresponding methods of test are given for the following:
-   construction, including field of vision;
-   shock absorbing properties;
-   retention system properties, including chin strap and fastening devices;
-   marking and information.

  • Technical specification
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1384:2023(Main)
Helmets for equestrian activities
SIST EN 1384:2023

This document specifies requirements for protective helmets that can have a peak, for people involved in all equestrian activities including but not limited to riding, driving, or handling and caring for horses.
It gives safety requirements that include methods of test and levels. Requirements and the corresponding methods of test are given for the following:
a)   construction, including field of vision;
b)   shock absorbing properties;
c)   resistance to penetration;
d)   mechanical strength in lateral deformation;
e)   retention system properties;
f)   deflection of peak (if fitted);
g)   marking and information;
h)   use of headforms in accordance with EN 960:2006.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 10256-4:2018(Main)
Protective equipment for use in ice hockey - Part 4: Head and face protection for goalkeepers (ISO 10256-4:2016)
SIST EN ISO 10256-4:2018

ISO 10256-4:2016 covers performance requirements for head and face protectors to be used by ice hockey goalkeepers. It is intended to be read in conjunction with ISO 10256‑1, ISO 10256‑2 and ISO 10256‑3.
Performance requirements are established, where appropriate for the following:
a)    materials, assembly, and design;
b)    protected areas (coverage) and penetration resistance;
c)    shock absorption;
d)    puck impact resistance;
e)    retention;
f)     optical quality.
NOTE 1       The requirements of a clause take precedent over a figure.
NOTE 2       The intent of this part of ISO 10256 is to reduce the risk of injury to the head and face of ice hockey goalkeepers without compromising the form and appeal of the game.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 10256-2:2018(Main)
Protective equipment for use in ice hockey - Part 2: Head protection for skaters (ISO 10256-2:2016)
SIST EN ISO 10256-2:2018

ISO 10256-2:2016 specifies performance requirements and test methods for head protectors for use in ice hockey and is intended to be read in conjunction with ISO 10256‑1.
Requirements and the corresponding test methods, where appropriate, are given for the following:
a)    construction and protected area;
b)    shock absorption;
c)    penetration;
d)    retention system properties;
e)    field of vision;
f)     marking and information.
ISO 10256-2:2016 applies to head protectors worn by
-      players other than goalkeepers, and
-      certain functionaries (e.g. referees).
NOTE 1       The requirements of a Clause take precedent over a figure.
NOTE 2       The intent of this part of ISO 10256 is to reduce the risk of injury to the head without compromising the form or appeal of the game.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 10256-3:2018(Main)
Protective equipment for use in ice hockey - Part 3: Face protectors for skaters (ISO 10256-3:2016)
SIST EN ISO 10256-3:2018

ISO 10256-3:2016 specifies performance requirements and test methods for face protectors (including visors) for use in ice hockey and is intended to be used in conjunction with ISO 10256‑1.
Requirements and the corresponding test methods, where appropriate, are given for the following:
a)    construction and area of coverage;
b)    resistance to puck impact;
c)    penetration;
d)    field of vision;
e)    geometric (visual) optics and acuity;
f)     transmittance and haze;
g)    marking and information.
ISO 10256-3:2016 applies to face protectors worn by
-      players other than goalkeepers, and
-      certain functionaries (e.g. referees).
NOTE 1       The requirements of a Clause take precedent over a figure.
NOTE 2       The intent is to reduce the risk of injury to the face without compromising the form or appeal of the game.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 10256-1:2016(Main)
Protective equipment for use in ice hockey - Part 1: General requirements (ISO 10256-1:2016)
SIST EN ISO 10256-1:2017

ISO 10256-1:2016 is part of ISO 10256 specifies general requirements for head, face, neck and body protectors (hereafter referred to as protectors) for use in ice hockey.
ISO 10256-1:2016 is intended only for protectors used for ice hockey. Requirements are given for the following:
a)    terms and definitions;
b)    innocuousness;
c)    ergonomics;
d)    test report;
e)    permanent markings;
f)     information for users.
In the ISO 10256 series, collateral standards specify performance requirements for protectors for use in ice hockey and are intended to be read in conjunction with ISO 10256-1:2016.
NOTE 1       The requirements of a clause take precedence over a figure.
NOTE 2       The intent is to reduce the risk of injury to an ice hockey player without compromising the form or appeal of the game. These standards presume that the rules of play for ice hockey will be followed by players and enforced by officials.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16471:2014(Main)
Firefighters helmets - Helmets for wildland fire fighting
SIST EN 16471:2015

This European Standard specifies the minimum requirements for wildland fire fighting helmets protecting the upper head mainly against the effects of impact, penetration, heat, flame and burning embers whilst conducting fire fighting and associated activities in wildland environments. Requirements for marking and information to be supplied by the manufacturer are included. Wildland fire fighting involves direct and indirect attack techniques (like wood cutting). This helmet is not intended to provide protection during fire entrapment.
Wildland environments include forests, crops, plantations and grass/heath/scrub or farmland.
Helmets for use whilst fire fighting in buildings and other structures are not covered by this European Standard (see EN 443).
Protection of the face, eyes, ears and neck may require additional items of PPE, which are not covered by this European Standard.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16473:2014(Main)
Firefighters helmets - Helmets for technical rescue
SIST EN 16473:2015

This European Standard specifies the minimum requirements for technical rescue helmets. These helmets are intended to protect the upper head mainly against the effects of mechanical hazards such as impact and penetration, flame, electrical and chemical hazards whilst conducting technical rescue and associated activities.
Technical rescues involves work associated with the environments and conditions associated with operational scenarios such as but not limited to those found during road traffic collisions and when working in and around collapsed structures often for extended periods of time after natural disasters (flood, earthquake, etc.)
Requirements for marking and information to be supplied by the manufacturer are included.
Helmets for use whilst firefighting in buildings and other structures or in wildland firefighting environments, are not covered by this European Standard, see EN 443 and EN 16471.
Helmets for use in water rescue operations using craft are also not covered by this European Standard.
Protection of the face, eyes, ears and neck may require additional items of PPE, which are not covered by this European Standard.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1080:2013(Main)
Impact protection helmets for young children
SIST EN 1080:2013

This European Standard specifies requirements and test methods for helmets intended for use by young children while pursuing recreational activities in environments which have proven risks of head injuries in combination with risk of strangulation.
Requirements and the corresponding methods of test are given for the following:
-   construction including field of vision;
-   shock absorbing properties;
-   retention system properties, including chin strap, fastening devices and self-release system;
-   marking and information.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 966:2012+A1:2012(Main)
Helmets for airborne sports
SIST EN 966:2012+A1:2012

This European Standard specifies requirements and test methods for protective helmets used in paragliding, hang gliding and flying with ultra-light aeroplanes.
Helmets for airborne sports are indicated in this European Standard as follows:
-   category HPG: Helmets for paragliding and hang gliding;
-   category UL: Helmets for flying with ultra-light aeroplanes.
Requirements and the corresponding methods of test, where appropriate, are given for the following:
-   construction including chin strap, fastening devices, field of vision, head mobility and eye protection;
-   penetration resistance;
-   shock-absorbing properties;
-   retention system properties;
-   marking and information for users.
NOTE   The requirements cover both categories. Special requirements are contained in the relevant clauses.
This European Standard does not apply to other kinds of head protection used in airborne sports.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day