iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 14737-2:2004

(Main)

Space engineering - Ground systems and operations - Part 2: Documents requirements definitions (DRDs)

Space engineering - Ground systems and operations - Part 2: Documents requirements definitions (DRDs)

Within the frame of the overall engineering standards for space missions, this European Standard contains the basic rules, principles and requirements to be applied to the engineering of the ground segment and mission operations, which form an integral part of the overall system implementing a space mission.
This European Standard includes development of ground segment, operations preparation activities, mission planning activities, mission evaluation activities, the conduct of operations proper, and all post-operational activities. The ground segment comprises the ground systems (i.e. all ground facilities, hardware and software) and all operational aspects such as personnel and related data repositories required on ground to perform mission operations.
For reasons of recognized commonality, ground segment within the meaning of this European Standard includes those elements and facilities required for the purpose of implementing the mission and fulfilling the missions requirements while the relevant space segments are in-orbit. It covers ground elements used for purposes of assembly, integration and verification of the space segment, to the extent needed for ground segment end-to-end verification activities. It also covers elements integrated into the ground segment after completion of space segment AIT; space segment AIT proper being considered outside the scope of this Standard.
It does not however cover the spacecraft activities and facilities interfacing the launch service segment. Furthermore, while this European Standard is applicable to all classes of missions it does not consider aspects that are specific to manned space missions.

Raumfahrttechnik - Bodensysteme und Bodenbetrieb - Teil 2: Dokumente mit Definitionen von Anforderungen

Ingénierie spatiale - Systèmes sol et exploitation - Partie 2 : Définition des exigences documentaires (DRD)

La Partie 2 de la norme EN 14737, intitulée « Ingénierie spatiale - Systèmes sol et exploitation », spécifie le contenu des définitions des exigences documentaires (DRD) qui sont appelées par d'autres Normes spatiales européennes et citées en référence dans la Partie 1 de l'EN 14737-1, « Principes et exigences ».

Vesoljska tehnika – Zemeljski sistemi in delovanje – 2. del: Dokumenti z definicijami zahtev

General Information

Status
Withdrawn
Publication Date
23-Mar-2004
Withdrawal Date
27-Jan-2015
ICS
49.140 - Space systems and operations
Technical Committee
CEN/SS T02 - Aerospace
Drafting Committee
CEN/SS T02 - Aerospace
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
28-Jan-2015
Mandate
M/237 - Mandate to CEN, CENELEC and ETSI for standardization in the field of equipment for the space industry
Ref Project
SIST EN 14737-2:2004 - Space engineering - Ground systems and operations - Part 2: Documents requirements definitions (DRDs)

Relations

Replaced By
EN 16603-70:2015 - Space engineering - Ground systems and operations
Effective Date
21-Aug-2013

Buy Standard

EN 14737-2:2004EN 14737-2:2004
PreviousNext
Standard
EN 14737-2:2004
English language
76 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Vesoljska tehnika – Zemeljski sistemi in delovanje – 2. del: Dokumenti z definicijami zahtevRaumfahrttechnik - Bodensysteme und Bodenbetrieb - Teil 2: Dokumente mit Definitionen von AnforderungenIngénierie spatiale - Systemes sol et exploitation - Partie 2 : Définition des exigences documentaires (DRD)Space engineering - Ground systems and operations - Part 2: Documents requirements definitions (DRDs)49.140Vesoljski sistemi in operacijeSpace systems and operationsICS:Ta slovenski standard je istoveten z:EN 14737-2:2004SIST EN 14737-2:2004en01-september-2004SIST EN 14737-2:2004SLOVENSKI
STANDARD



SIST EN 14737-2:2004



SIST EN 14737-2:2004



SIST EN 14737-2:2004



SIST EN 14737-2:2004



SIST EN 14737-2:2004



SIST EN 14737-2:2004



SIST EN 14737-2:2004



SIST EN 14737-2:2004



SIST EN 14737-2:2004



SIST EN 14737-2:2004



SIST EN 14737-2:2004



SIST EN 14737-2:2004



SIST EN 14737-2:2004



SIST EN 14737-2:2004



SIST EN 14737-2:2004



SIST EN 14737-2:2004



SIST EN 14737-2:2004



SIST EN 14737-2:2004



SIST EN 14737-2:2004



SIST EN 14737-2:2004



SIST EN 14737-2:2004



SIST EN 14737-2:2004



SIST EN 14737-2:2004



SIST EN 14737
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 16091:2002(Main)
Space systems - Integrated logistic support (ISO 16091:2002)
SIST EN ISO 16091:2004

ISO 16091:2002 describes the set of management requirements needed to identify and provide logistic support, so the customer can operate and maintain a product in its operational environment for the expected lifetime.
These requirements also aim, throughout the product life cycle, at implementing everything pertinent to the control of the risks considered as critical regarding the operational objectives.
The management requirements are applicable to those activities necessary to design, develop, deliver, deploy and manage an organized and structured set of materials and software, services, processes and information dedicated to support the system throughout its life cycle.
ISO 16091:2002 specifies management, studies, production activities, information management processes and tasks to meet the customer's need for logistic support.
When viewed from the perspective of a specific programme or project context, the requirements defined in ISO 16091:2002 should be tailored to match the genuine requirements of a particular profile and circumstances of a programme or project.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN ISO 17666(Main)
Space systems - Risk management (ISO/DIS 17666:2015)
oSIST prEN ISO 17666:2016
  • Draft
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16603-20-40:2023(Main)
Space engineering - ASIC, FPGA and IP Core engineering
SIST EN 16603-20-40:2024

This activity w ill be the parallel development of EN 16603-20-40 and ECSS-E-ST-20-40C.
The scope shall cover the areas of existing ASIC and FPGA engineering chapter 5 of ECSS-Q-ST-60-02C, but w ith w ider breadth and greater depth, covering engineering requirements of end-to-end development flow s, from specification of requirements to validation of prototypes, of the follow ing monolithic devices for its use in space:
• ASICs (distinguishing digital, analogue and mixed-signal development flow s)
• FPGAs (distinguishing three technology families: SRAM, FLASH and anti-fuse technologies)
• ASIC and FPGA System-on-Chip embedding processor cores w hich have external “softw are programme” dependencies to be addressed during the SoC development, resulting in SW-HW co-design requirements.

  • Standard
    139 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16604-10:2023(Main)
Space sustainability - Space debris mitigation requirements (ISO 24113:2023, modified)
SIST EN 16604-10:2024

This document defines the primary space debris mitigation requirements applicable to all elements of unmanned systems launched into, or passing through, near-Earth space, including launch vehicle orbital stages, operating spacecraft and any objects released as part of normal operations.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16603-20:2023(Main)
Space engineering - Electrical and electronic
SIST EN 16603-20:2024

Scope remains unchanged.
This Standard establishes the basic rules and general principles applicable to the electrical, electronic, electromagnetic, microwave and engineering processes. It specifies the tasks of these engineering processes and the basic performance and design requirements in each discipline.
It defines the terminology for the activities within these areas.
It defines the specific requirements for electrical subsystems and payloads, deriving from the system engineering requirements laid out in EN 16603-10 (equivalent of ECSS-E-ST-10 "Space engineering - System engineering general requirements".)

  • Standard
    135 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16603-20-08:2023(Main)
Space engineering - Photovoltaic assemblies and components
SIST EN 16603-20-08:2023

This Standard specifies the general requirements for the qualification, procurement, storage and delivery of photovoltaic assemblies, solar cell assemblies, bare solar cells, coverglasses and protection diodes suitable for space applications.
This standard does not cover the particular qualification requirements for a specific mission.
This Standard primarily applies to qualification approval for photovoltaic assemblies, solar cell assemblies, bare solar cells, coverglasses and protection diodes, and to the procurement of these items.
This standard is limited to crystaline Silicon and single and multi-junction GaAs solar cells with a thickness of more than 50 m and does not include thin film solar cell technologies and poly-crystaline solar cells.
This Standard does not cover the concentration technology, and especially the requirements related to the optical components of a concentrator (e.g. reflector and lens) and their verification (e.g. collimated light source).
This Standard does not apply to qualification of the solar array subsystem, solar panels, structure and solar array mechanisms.

  • Standard
    230 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16602-60:2023(Main)
Space product assurance - Electrical, electronic and electromechanical (EEE) components
SIST EN 16602-60:2023

The Scope of the Standard remains unchanged.
This standard defines the requirements for selection, control, procurement and usage of EEE components for space projects.
This standard differentiates between three classes of components through three different sets of standardization requirements (clauses) to be met.
The three classes provide for three levels of trade-off between assurance and risk. The highest assurance and lowest risk is provided by class 1 and the lowest assurance and highest risk by class 3. Procurement costs are typically highest for class 1 and lowest for class 3. Mitigation and other engineering measures may decrease the total cost of ownership differences between the three classes. The project objectives, definition and constraints determine which class or classes of components are appropriate to be utilised within the system and subsystems.
a.   Class 1 components are described in Clause 4.
b.   Class 2 components are described in Clause 5
c.   Class 3 components are described in Clause 6.
The requirements of this document apply to all parties involved at all levels in the integration of EEE components into space segment hardware and launchers.

  • Standard
    103 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16602-70-40:2023(Main)
Space product assurance - Processing and quality assurance requirements for hard brazing of metallic materials for flight hardware
SIST EN 16602-70-40:2023

2021-04-21: This EN is based on ECSS-Q-ST-70-40C

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16602-60-13:2023(Main)
Space product assurance - Commercial electrical, electronic and electromechanical (EEE) components
SIST EN 16602-60-13:2023

2021-04-21: This EN is based on ECSS-Q-ST-60-13C Rev.1

  • Standard
    106 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16602-70-61:2022(Main)
Space product assurance - High-reliability soldering for surface mount, mixed technology and hand-mounted electrical connections
SIST EN 16602-70-61:2022

This standard defines:
- the basic requirements for the verification and approval of automatic machine w ave soldering for use in spacecraft hardware. The process requirements for w ave soldering of doublesided and multilayer boards are also defined.
- the technical requirements and quality assurance provisions for the manufacture and verification of manuallysoldered, high-reliability electrical connections.
- the technical requirements and quality assurance provisions for the manufacture and verification of high-reliability electronic circuits based on surface mounted device (SMD) and mixed technology.
- the acceptance and rejection criteria for high reliability manufacture of manually-soldered electrical connections intended to w ithstand normal terrestrial conditions and the vibrational g-loads and environment imposed by space flight.
- the proper tools, correct materials, design and w orkmanshipt. Workmanship standards are included to permit discrimination betw een proper and improper work.
SCOPE
This Standard defines the technical requirements and quality assurance provisions for the manufacture and verification of high-reliability electronic circuits of surface mount, through hole and solderless assemblies.
The Standard defines w orkmanship requirements, the acceptance and rejection criteria for high-reliability assemblies intended to withstand normal terrestrial conditions and the environment imposed by space flight.
The mounting and supporting of components, terminals and conductors specified in this standard applies only to assemblies designed to continuously operate over the mission w ithin the temperature limits of -55 °C to +85 °C at solder joint level.
Requirements related to printed circuit boards are contained in ECSS-Q-ST-70-60 (equivalent to EN 16602-70-60) and ECSS-Q-ST-70-12 (equivalent to EN 16602-70-12).
This Standard does not cover the qualification and acceptance of the EQM and FM equipment w ith high-reliability electronic circuits of surface mount, through hole and solderless assemblies.
This Standard does not cover verification of thermal properties for component assembly.
This Standard does not cover pressfit connectors.
The qualification and acceptance tests of equipment manufactured in accordance w ith this Standard are covered by ECSS-EST-10-03 (equivalent to EN 16603-10-03).

  • Standard
    253 pages
    English language
    sale 10% off
    e-Library read for
    1 day