EN ISO 18452:2016

Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of thickness of ceramic films by contact-probe profilometer (ISO 18452:2005)

ISO 18452:2005 specifies a method for the determination of the film thickness of a fine ceramic film and ceramic coatings by a contact-probe profilometer. The method is suitable for film thicknesses in the range of 10 nm to 10 000 nm.

Hochleistungskeramik - Bestimmung der Dicke keramischer Schichten mit einem Kontaktprofilometer (ISO 18452:2005)

Diese Internationale Norm legt ein Verfahren zur Bestimmung der Schichtdicke feinkeramischer Schichten und keramischer Beschichtungen mit einem Kontaktprofilometer fest. Das Verfahren ist für Schichtdicken im Bereich von 10 nm bis 10 000 nm geeignet.
ANMERKUNG   Das Verfahren erfordert eine ausgeprägte und deutlich geformte Grenze zwischen beschichtetem und unbeschichtetem Bereich des Grundwerkstoffes (Substrat).

Céramiques techniques - Détermination de l'épaisseur des films céramiques avec un profilomètre à contact (ISO 18452:2005)

L'ISO 18452 :2005 spécifie une méthode permettant de déterminer l'épaisseur d'un film céramique technique et de revêtements céramiques à l'aide d'un profilomètre à contact. La méthode est adaptée à des épaisseurs de film comprises entre 10 nm et 10 000 nm.
NOTE          La méthode nécessite une frontière distincte et clairement formée entre les parties revêtue et non revêtue du substrat.

Fina keramika (sodobna keramika, sodobna tehnična keramika) - Ugotavljanje debeline keramične plasti z merilnikom profilov (ISO 18452:2005)

Ta mednarodni standard podaja metodo za ugotavljanje debeline fine keramične plasti in keramičnih prevlek z merilnikom profilov. Metoda je primerna za debelino plasti v razponu od 10 nm do 10.000 nm.

General Information

• Status: Published
• Publication Date: 19-Apr-2016
• Withdrawal Date: 30-Oct-2016
• ICS: 81.060.30 - Advanced ceramics
• Technical Committee: CEN/TC 184 - Advanced technical ceramics
• Drafting Committee: CEN/TC 184 - Advanced technical ceramics
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 20-Apr-2016
• Due Date: 22-Nov-2016
• Completion Date: 20-Apr-2016
• Ref Project: SIST EN ISO 18452:2016 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of thickness of ceramic films by contact-probe profilometer (ISO 18452:2005)

Relations

• Replaces: EN 1071-1:2003 - Advanced technical ceramics - Methods of test for ceramic coatings - Part 1: Determination of coating thickness by contact probe filometer
• Effective Date: 17-Dec-2014

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 18452:2016
01-junij-2016
1DGRPHãþD
SIST EN 1071-1:2004
)LQDNHUDPLNDVRGREQDNHUDPLNDVRGREQDWHKQLþQDNHUDPLND8JRWDYOMDQMH
GHEHOLQHNHUDPLþQHSODVWL]PHULOQLNRPSURILORY,62
Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of
thickness of ceramic films by contact-probe profilometer (ISO 18452:2005)
Hochleistungskeramik - Bestimmung der Dicke keramischer Schichten mit einem
Kontaktprofilometer (ISO 18452:2005)
Céramiques techniques - Détermination de l'épaisseur des films céramiques avec un
profilomètre à contact (ISO 18452:2005)
Ta slovenski standard je istoveten z: EN ISO 18452:2016
ICS:
25.220.99 Druge obdelave in prevleke Other treatments and
coatings
81.060.30 Sodobna keramika Advanced ceramics
SIST EN ISO 18452:2016 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 18452:2016

---------------------- Page: 2 ----------------------

SIST EN ISO 18452:2016


EN ISO 18452
EUROPEAN STANDARD

NORME EUROPÉENNE

April 2016
EUROPÄISCHE NORM
ICS 81.060.30 Supersedes EN 1071-1:2003
English Version

Fine ceramics (advanced ceramics, advanced technical
ceramics) - Determination of thickness of ceramic films by
contact-probe profilometer (ISO 18452:2005)
Céramiques techniques - Détermination de l'épaisseur Hochleistungskeramik - Bestimmung der Dicke
des films céramiques avec un profilomètre à contact keramischer Schichten mit einem Kontaktprofilometer
(ISO 18452:2005) (ISO 18452:2005)
This European Standard was approved by CEN on 25 March 2016.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 18452:2016 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 18452:2016
EN ISO 18452:2016 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 18452:2016
EN ISO 18452:2016 (E)
European foreword
The text of ISO 18452:2005 has been prepared by Technical Committee ISO/TC 206 “Fine ceramics” of
the International Organization for Standardization (ISO) and has been taken over as EN ISO 18452:2016
by Technical Committee CEN/TC 184 “Advanced technical ceramics” the secretariat of which is held by
DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by October 2016, and conflicting national standards shall
be withdrawn at the latest by October 2016.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes EN 1071-1:2003.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 18452:2005 has been approved by CEN as EN ISO 18452:2016 without any modificati
...