EN ISO 7010:2012/A1:2014
(Amendment)Graphical symbols - Safety colours and safety signs - Registered safety signs (ISO 7010:2011/Amd 1:2012)
Graphical symbols - Safety colours and safety signs - Registered safety signs (ISO 7010:2011/Amd 1:2012)
2013-04-11 GVN: WI created for 3-month UAP
Graphische Symbole - Sicherheitsfarben und Sicherheitszeichen - Registrierte Sicherheitszeichen (ISO 7010:2011/Amd 1:2012)
Symboles graphiques - Couleurs de sécurité et signaux de sécurité - Signaux de sécurité enregistrés (ISO 7010:2011/Amd 1:2012)
Grafični simboli - Varnostne barve in varnostni znaki - Registrirani varnostni znaki (ISO 7010:2011/Amd 1:2012)
Ta mednarodni standard določa opozorilne znake za preprečevanje nesreč, zaščito pred požari, informacije o nevarnostih za zdravje in zasilno evakuacijo. Oblika in barva posameznega varnostnega znaka sta skladni s standardom ISO 3864-1, oblika grafičnih simbolov pa s standardom ISO 3864-3. Ta mednarodni standard se uporablja za vse lokacije, za katere je treba obravnavati vprašanja varnosti, povezana z ljudmi. Vendar se ne uporablja za signaliziranje, ki se uporablja za železniški, cestni, rečni, pomorski in letalski promet ter na splošno za tiste sektorje, za katere veljajo predpisi, ki se lahko razlikujejo v nekaterih točkah tega mednarodnega standarda in serije standardov ISO 3864. Ta mednarodni standard določa izvirnik varnostnega znaka, katerega velikost se lahko spremeni za namene razmnoževanja in uporabe.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-april-2014
*UDILþQLVLPEROL9DUQRVWQHEDUYHLQYDUQRVWQL]QDNL5HJLVWULUDQLYDUQRVWQL]QDNL
,62 $PG
Graphical symbols - Safety colours and safety signs - Registered safety signs (ISO
7010:2011/Amd 1:2012)
Graphische Symbole - Sicherheitsfarben und Sicherheitszeichen - Registrierte
Sicherheitszeichen (ISO 7010:2011/Amd 1:2012)
Symboles graphiques - Couleurs de sécurité et signaux de sécurité - Signaux de sécurité
enregistrés (ISO 7010:2011/Amd 1:2012)
Ta slovenski standard je istoveten z: EN ISO 7010:2012/A1:2014
ICS:
01.080.10 6LPEROL]DMDYQRREYHãþDQMH Public information symbols.
=QDNL7DEOH2]QDþEH Signs. Plates. Labels
13.200 3UHSUHþHYDQMHQHVUHþLQ Accident and disaster control
NDWDVWURI
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 7010:2012/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2014
ICS 01.080.10; 01.080.20
English Version
Graphical symbols - Safety colours and safety signs - Registered
safety signs (ISO 7010:2011/Amd 1:2012)
Symboles graphiques - Couleurs de sécurité et signaux de Graphische Symbole - Sicherheitsfarben und
sécurité - Signaux de sécurité enregistrés (ISO Sicherheitszeichen - Registrierte Sicherheitszeichen (ISO
7010:2011/Amd 1:2012) 7010:2011/Amd 1:2012)
This amendment A1 modifies the European Standard EN ISO 7010:2012; it was approved by CEN on 5 January 2014.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 7010:2012/A1:2014 E
worldwide for CEN national Members.
Contents Page
Foreword .3
Foreword
The text of ISO 7010:2011/Amd 1:2012 has been prepared by Technical Committee ISO/TC 145 “Graphical
symbols” of the International Organization for Standardization (ISO) and has been taken over as
This Amendment to the European Standard EN ISO 7010:2012 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by July 2014, and
conflicting national standards shall be withdrawn at the latest by July 2014.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 7010:2011/Amd 1:2012 has been approved by CEN as EN ISO 7010:2012/A1:2014 without
any modification.
INTERNATIONAL ISO
STANDARD 7010
Second edition
2011-06-01
AMENDMENT 1
2012-04-15
Graphical symbols — Safety colours and
safety signs — Registered safety signs
AMENDMENT 1
Symboles graphiques — Couleurs de sécurité et signaux de sécurité —
Signaux de sécurité enregistrés
AMENDEMENT 1
Reference number
ISO 7010:2011/Amd.1:2012(E)
©
ISO 2012
ISO 7010:2011/Amd.1:2012(E)
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO’s
member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2012 – All rights reserved
ISO 7010:2011/Amd.1:2012(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International
Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
Amendment 1 to ISO 7010:2011 was prepared by Technical Committee ISO/TC 145, Graphical symbols,
Subcommittee SC 2, Safety identification, signs, shapes, symbols and colours.
ISO 7010:2011/Amd.1:2012(E)
Graphical symbols — Safety colours and safety signs —
Registered safety signs
AMENDMENT 1
IMPORTANT — The colours represented in the electronic file of this document can be neither viewed
on screen nor printed as true representations. Although the copies of this document printed by ISO
have been produced to correspond (with an acceptable tolerance as judged by the naked eye) to the
requirements of ISO 3864-4, it is not intended that these printed copies be used for colour matching.
Instead consult ISO 3864-4 which provides colorimetric and photometric properties together with, as
a guideline, references from colour order systems.
Add the following safety signs:
— M028: Keep locked
— M029: Sound horn
— M030: Use litter bin
— M031: Use table saw adjustable guard
— M032: Wear anti-static footwear
— P016: Do not spray with water
— W030: Warning; Hand crushing between press brake tool
— W031: Warning; Hand crushing between press brake and material
— W033: Warning; Barbed wire
— W034: Warning; Bull
— W035: Warning; Falling objects
ISO 7010:2011/Amd.1:2012(E)
Safety sign M028: Keep locked
Reference No.
ISO 7010-M028
Referent
Keep locked
Function
To signify that a cabinet or facility must be kept locked
Image content
Padlock with keyhole and four complete chain links and
two pieces
Hazard
Access to harmful substances or equipment
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
Ensuring that cabinets or facilit
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.