EN 1014-3:2010

Wood preservatives - Creosote and creosoted timber - Methods of sampling and analysis - Part 3: Determination of the benzo(a)pyrene content of creosote

This European Standard specifies a method for the determination of benzo(a)pyrene in creosote using high performance liquid chromatography (HPLC).
This standard is only applicable to creosotes containing more than 30 mg/kg benzo(a)pyrene.

Holzschutzmittel - Kreosot (Teerimprägnieröl) und damit imprägniertes Holz - Probenahme und Analyse - Teil 3: Bestimmung des Gehaltes an Benzo(a)pyren im Kreosot

Diese Europäische Norm legt das Hochdruckflüssigchromatographie-Verfahren (HPLC) für die Bestimmung von Benzo(a)pyren im Kreosot (Teerimprägnieröl) fest.
Diese Norm ist nur anwendbar für Kreosote mit einem Gehalt an Benzo(a)pyren von mehr als 30 mg/kg.

Produits de préservation du bois - Créosote et bois créosoté - Méthodes d'échantillonnage et d'analyse - Partie 3: Détermination de la teneur en benzo[a]pyrène dans la créosote

La présente norme européenne spécifie une méthode pour la détermination du benzo[a]pyrène dans la créosote par chromatographie liquide à haute performance (HPLC).
La présente norme est uniquement applicable aux créosotes contenant plus de 30 mg/kg de benzo[a]pyrène.

Zaščitna sredstva za les - Kreozotno olje in s kreozotnim oljem zaščiten les - Metode vzorčenja in analize - 3. del: Ugotavljanje deleža benzo(a)pirena v kreozotnem olju

Ta evropski standard opisuje metodo ugotavljanja benzo(a)pirena v kreozotnem olju z uporabo tekočinske kromatografije visoke ločljivosti (HPLC). Ta standard velja le za kreozotna olja, ki vsebujejo več kot 30 mg/kg benzo(a)pirena.

General Information

• Status: Published
• Publication Date: 08-Jun-2010
• Withdrawal Date: 30-Dec-2010
• ICS: 71.100.50 - Wood-protecting chemicals
• Technical Committee: CEN/TC 38 - Durability of wood and derived materials
• Drafting Committee: CEN/TC 38/WG 26 - Physical/chemical factors (analytical methods)
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 19-Nov-2020
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Ref Project: SIST EN 1014-3:2011 - Wood preservatives - Creosote and creosoted timber - Methods of sampling and analysis - Part 3: Determination of the benzo[a]pyrene content of creosote

Relations

• Replaces: EN 1014-3:1997 - Wood preservatives - Creosote and creosoted timber - Methods of sampling and analysis - Part 3: Determination of the benzo(a)pyrene content of creosote
• Effective Date: 12-Jun-2010

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Holzschutzmittel - Kreosot (Teerimprägnieröl) und damit imprägniertes Holz - Probenahme und Analyse - Teil 3: Bestimmung des Gehaltes an Benzo[a]pyren im KreosotProduits de préservation du bois - Créosote et bois créosoté - Méthodes d'échantillonnage et d'analyse - Partie 3 : Détermination de la teneur en benzo[a]pyrène dans la créosoteWood preservatives - Creosote and creosoted timber - Methods of sampling and analysis - Part 3: Determination of the benzo[a]pyrene content of creosote71.100.50Wood-protecting chemicalsICS:Ta slovenski standard je istoveten z:EN 1014-3:2010SIST EN 1014-3:2011en,fr,de01-marec-2011SIST EN 1014-3:2011SLOVENSKI
STANDARDSIST EN 1014-3:20041DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1014-3
June 2010 ICS 71.100.50 Supersedes EN 1014-3:1997English Version
Wood preservatives - Creosote and creosoted timber - Methods of sampling and analysis - Part 3: Determination of the benzo(a)pyrene content of creosote
Produits de préservation du bois - Créosote et bois créosoté - Méthodes d'échantillonnage et d'analyse -Partie 3: Détermination de la teneur en benzo[a]pyrène dans la créosote
Holzschutzmittel - Kreosot (Teerimprägnieröl) und damit imprägniertes Holz - Probenahme und Analyse - Teil 3: Bestimmung des Gehaltes an Benzo(a)pyren im Kreosot This European Standard was approved by CEN on 12 May 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1014-3:2010: ESIST EN 1014-3:2011

Examples of chromatograms .8Annex B (informative)
Interpretation of the test results . 11Bibliography . 12 SIST EN 1014-3:2011

This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2010, and conflicting national standards shall be withdrawn at the latest by December 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 1014-3:1997. This standard forms part of a series of standards relating to the sampling and analysis of creosote and creosoted timber. The other standards of the series are: EN 1014-1, Wood preservatives
Creosote and creosoted timber
Methods of sampling and analysis
Part 1: Procedure for sampling creosote EN 1014-2, Wood preservatives
Creosote and creosoted timber
Methods of sampling and analysis
Part 2: Procedure for obtaining a sample of creosote from creosoted timber for subsequent analysis EN 1014-4, Wood preservatives
Creosote and creosoted timber
Methods of sampling and analysis
Part 4: Determination of the water-extractable phenols content of creosote According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
Specification and test methods (ISO 3696:1987) 3 Principle The creosote sample is diluted to an appropriate concentration with an acetonitrile/water mixture. The diluted sample is analyzed using high performance liquid chromatography (HPLC) at constant temperature with a reverse phase packed column and isocratic elution. The result is compared with that from a known reference standard. 4 Reagents 4.1 Acetonitrile − water mixture. Add 220 ml of water (according to grade 1 of EN ISO 3696:1995) to 780 ml of acetonitrile (CH3CN, HPLC grade) and mix thoroughly. The mixture shall be at room temperature before use. 4.2 Benzo(a)pyrene solution, containing approximately
...