Derivatives from coal pyrolysis - Coal tar based oils: creosotes - Specifications and test methods

This European Standard gives the specifications and the test methods for creosotes for industrial wood preservation.
Different grades of creosote are used depending on the desired properties of the treated wood.
WARNING - The use of this European Standard may involve hazardous materials, operations and equipment. This standard cannot address all of the safety implications associated with its use. It is the responsibility of the user of this standard to establish appropriate health and safety practices and assess the applicability of regulatory limitations prior to use.  The warnings to use are covered in annex C.

Derivate der Kohlenpyrolyse - Öle aus Steinkohlenteer: Kreosot - Anforderungen und Prüfverfahren

Diese Europäische Norm legt Anforderungen und Prüfverfahren für Kreosotöle zum industriellen Holzschutz fest.
In Abhängigkeit von den gewünschten Eigenschaften des Endproduktes werden verschiedene Teeröltypen verwendet.
WARNUNG  Die Anwendung dieser Internationalen Norm kann den Einsatz gefährlicher Stoffe, Arbeitsgänge und Geräte mit sich bringen. Diese Norm gibt nicht vor, alle mit ihrer Anwendung verbundenen Sicherheitsprobleme anzusprechen. Der Anwender dieser Norm ist dafür verantwortlich, vorher angemessene Maßnahmen zu ergreifen und die Anwendbarkeit einschränkender Vorschriften zu ermitteln.

Produits dérivés de la pyrolyse du charbon - Huiles de goudron de houille: Créosotes - Spécifications et méthodes d'essai

La présente Norme européenne donne les spécifications et les méthodes d'essai pour les créosotes utilisées dans l'industrie de préservation du bois.
Les créosotes employées sont classées en fonction des propriétés attendues du produit final.
AVERTISSEMENT - L'utilisation de la présente Norme internationale peut impliquer l'utilisation de produits et la mise en oeuvre de modes opératoires et d'appareillages à caractère dangereux. La présente norme n'a pas pour but d'aborder tous les problèmes de sécurité liés à son utilisation. Il incombe à l'utilisateur de la présente norme d'établir, avant de l'utiliser, des pratiques d'hygiène et de sécurité et de déterminer l'applicabilité des restrictions réglementaires. Les avertissements pour l'utilisation sont traités à l'Annexe C.

Derivatives from coal pyrolysis - Coal tar based oils: creosotes - Specifications and test methods

General Information

Status
Published
Publication Date
26-Aug-2003
Withdrawal Date
28-Feb-2004
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
18-Oct-2017

Relations

Buy Standard

Standard
EN 13991:2003
English language
15 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Derivatives from coal pyrolysis - Coal tar based oils: creosotes - Specifications and test methodsDerivate der Kohlenpyrolyse - Öle aus Steinkohlenteer: Kreosot - Anforderungen und PrüfverfahrenProduits dérivés de la pyrolyse du charbon - Huiles de goudron de houille: Créosotes - Spécifications et méthodes d'essaiDerivatives from coal pyrolysis - Coal tar based oils: creosotes - Specifications and test methods75.160.10Trda gorivaSolid fuelsICS:Ta slovenski standard je istoveten z:EN 13991:2003SIST EN 13991:2003en01-december-2003SIST EN 13991:2003SLOVENSKI
STANDARD



SIST EN 13991:2003



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13991August 2003ICS 71.100.50; 75.140English versionDerivatives from coal pyrolysis - Coal tar based oils: creosotes -Specifications and test methodsProduits dérivés de la pyrolyse du charbon - Huiles degoudron de houille: Créosotes - Spécifications et méthodesd'essaiDerivate der Kohlenpyrolyse - Öle aus Steinkohlenteer:Kreosot - Anforderungen und PrüfverfahrenThis European Standard was approved by CEN on 2 July 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13991:2003 ESIST EN 13991:2003



EN 13991:2003 (E)2ContentspageForeword.31Scope.42Normative references.43Terms and definitions.44Sampling.45Specifications and test methods.4Annex A (normative)
Determination of the crystallization temperature of coal tar oil.6Annex B (normative)
Determination of the distillation range of coal tar oil.8Annex C (informative)
Warning to use.14Bibliography.15SIST EN 13991:2003



EN 13991:2003 (E)3ForewordThis document (EN 13991:2003) has been prepared by Technical Committee CEN /TC 317, "Derivatives from coalpyrolysis", the secretariat of which is held by IBN.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by February 2004, and conflicting national standards shall be withdrawn at the latestby February 2004.Annexes A and B are normative.
Annex C is informative.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal,Slovakia, Spain, Sweden, Switzerland and the United Kingdom.SIST EN 13991:2003



EN 13991:2003 (E)41 ScopeThis European Standard gives the specifications and the test methods for creosotes for industrial woodp
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.