EN 13232-3:2003

Railway applications - Track - Switches and crossings - Part 3: Requirements for wheel/rail interaction

This part of this European Standard specifies:
- characterisation of wheel and track dimensions;
- geometric design principles for wheel guidance;
- design principles for wheel load transfer;
- deciding whether movable crossings are needed.
These are illustrated by their application to turnout components:
- switches;
- crossings;
- check rails.
but the principles apply equally to more complex layouts.

Bahnanwendungen - Oberbau - Weichen und Kreuzungen - Teil 3: Anforderungen an das Zusammenspiel Rad/Schiene

Diese Europäische Norm umfasst folgende Bereiche:
¾ Beschreibung der Rad- und Gleismaße;
¾ geometrische Entwurfsgrundsätze für die Radführung;
¾ Entwurfsrichtlinien für die Radlastübertragung;
¾ Entscheidung darüber, ob Herzstücke mit beweglichen Bauteilen erforderlich sind.
Diese werden in ihrer Anwendung auf die Weichenbauteile
¾ Zungenvorrichtungen;
¾ Herzstücke;
¾ Radlenker
dargestellt, jedoch sind die Grundsätze auch auf umfangreichere Gleisanlagen anwendbar.

Applications ferroviaires - Voie - Appareils de voie - Partie 3: Exigences pour l'interaction Roue/Rail

La présente partie de la Norme européenne traite des sujets suivants :
   caractérisation des dimensions des roues et des voies ;
   principe de conception géométrique pour le guidage des roues ;
   principe de conception pour le transfert de charge des roues ;
   décision sur la nécessité d'utiliser des c�urs à parties mobiles.
Les sujets sont illustrés par l'application aux composants du branchement :
   aiguillages ;
   c�urs ;
   contre-rails.
mais les principes s'appliquent également aux appareils de voie plus complexes.

Železniške naprave - Zgornji ustroj – Kretnice in križišča –3..del: Zahteve na stiku kolo/tirnica

General Information

• Status: Withdrawn
• Publication Date: 19-Aug-2003
• Withdrawal Date: 18-Oct-2011
• ICS: 45.080 - Rails and railway components
• Technical Committee: CEN/TC 256 - Railway applications
• Drafting Committee: CEN/TC 256/SC 1/WG 18 - Switches and crossings - Performance and acceptance
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 19-Oct-2011
• Completion Date: 19-Oct-2011
• Directive: 93/38/EEC - Procurement procedures of entities operating in the water, energy, transport and telecommunications sectors
• Mandate: M/024 - Mandate to CEN/CENELEC/ETSI for programming and standardization in the field of railway equipment
• Ref Project: SIST EN 13232-3:2004 - Railway applications - Track - Switches and crossings - Part 3: Requirements for wheel/rail interaction

Relations

• Merged Into: EN 13232-3:2003+A1:2011 - Railway applications - Track - Switches and crossings - Part 3: Requirements for wheel/rail interaction
• Effective Date: 19-Jan-2023
• Amended By: EN 13232-3:2003/FprA1 - Railway applications - Track - Switches and crossings - Part 3: Requirements for wheel/rail interaction
• Effective Date: 12-Jun-2010

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.NRORWLUQLFDBahnanwendungen - Oberbau - Weichen und Kreuzungen - Teil 3: Anforderungen an das Zusammenspiel Rad/SchieneApplications ferroviaires - Voie - Appareils de voie - Partie 3: Exigences pour l'interaction Roue/RailRailway applications - Track - Switches and crossings - Part 3: Requirements for wheel/rail interaction45.080Rails and railway componentsICS:Ta slovenski standard je istoveten z:EN 13232-3:2003SIST EN 13232-3:2004en01-junij-2004SIST EN 13232-3:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13232-3August 2003ICS 45.080English versionRailway applications - Track - Switches and crossings - Part 3:Requirements for wheel/rail interactionApplications ferroviaires - Voie - Appareils de voie - Partie3: Exigences pour l'interaction Roue/RailBahnanwendungen - Oberbau - Weichen und Kreuzungen -Teil 3: Anforderungen an das Zusammenspiel Rad/SchieneThis European Standard was approved by CEN on 13 February 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13232-3:2003 ESIST EN 13232-3:2004
...