EN ISO 2811-1:2011

Paints and varnishes - Determination of density - Part 1: Pyknometer method (ISO 2811-1:2011)

ISO 2811-1:2011 specifies a method for determining the density of paints, varnishes and related products using a metal or Gay-Lussac pyknometer.
The method is limited to materials of low or medium viscosity at the temperature of test. The Hubbard pyknometer can be used for highly viscous materials.

Beschichtungsstoffe - Bestimmung der Dichte - Teil 1: Pyknometer-Verfahren (ISO 2811-1:2011)

Dieser Teil von ISO 2811 legt ein Verfahren zum Bestimmen der Dichte von Beschichtungsstoffen und
ähnlichen Produkten mit einem Metallpyknometer oder einem Pyknometer nach Gay-Lussac fest.
Das Verfahren ist nur für Stoffe mit niedriger oder mittlerer Viskosität bei der Prüftemperatur anwendbar. Das
Pyknometer nach Hubbard (siehe ISO 3507) kann für hochviskose Stoffe verwendet werden.

Peintures et vernis - Détermination de la masse volumique - Partie 1: Méthode pycnométrique (ISO 2811-1:2011)

L'ISO 2811-1:2011 spécifie une méthode de détermination de la masse volumique des peintures, vernis et produits assimilés au moyen d'un pycnomètre en métal ou d'un pycnomètre de Gay-Lussac.
La méthode est limitée aux produits de viscosité faible ou moyenne à la température d'essai. Le pycnomètre de Hubbard (voir l'ISO 3507) peut être utilisé pour les produits à forte viscosité.

Barve in laki - Ugotavljanje gostote - 1. del: Metoda s piknometrom (ISO 2811-1:2011)

Ta del ISO 2811 določa metodo za ugotavljanje gostote barv, lakov in sorodnih proizvodov z uporabo kovinskega ali Gay-Lussacovega piknometra. Metoda je omejena na materiale, ki imajo pri temperaturi preskušanja nizko ali srednjo viskoznost. Za visokoviskozne materiale se lahko uporablja Hubbardov piknometer (glej ISO 3507).

General Information

• Status: Withdrawn
• Publication Date: 28-Feb-2011
• Withdrawal Date: 22-Mar-2016
• ICS: 87.040 - Paints and varnishes
• Technical Committee: CEN/TC 139 - Paints and varnishes
• Drafting Committee: CEN/TC 139 - Paints and varnishes
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 23-Mar-2016
• Ref Project: SIST EN ISO 2811-1:2011 - Paints and varnishes - Determination of density - Part 1: Pyknometer method (ISO 2811-1:2011)

Relations

• Replaces: EN ISO 2811-1:2001/AC:2006 - Paints and varnishes - Determination of density - Part 1: Pyknometer method (ISO 2811-1:1997)
• Effective Date: 05-Mar-2011
• Replaces: EN ISO 2811-1:2001 - Paints and varnishes - Determination of density - Part 1: Pyknometer method (ISO 2811-1:1997)
• Effective Date: 05-Mar-2011
• Replaced By: EN ISO 2811-1:2016 - Paints and varnishes - Determination of density - Part 1: Pycnometer method (ISO 2811-1:2016)
• Effective Date: 16-Jul-2014

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 2811-1:2011
01-november-2011
1DGRPHãþD
SIST EN ISO 2811-1:2002
SIST EN ISO 2811-1:2002/AC:2006
Barve in laki - Ugotavljanje gostote - 1. del: Metoda s piknometrom (ISO 2811-
1:2011)
Paints and varnishes - Determination of density - Part 1: Pyknometer method (ISO 2811-
1:2011)
Beschichtungsstoffe - Bestimmung der Dichte - Teil 1: Pyknometer-Verfahren (ISO 2811-
1:2011)
Peintures et vernis - Détermination de la masse volumique - Partie 1: Méthode
pycnométrique (ISO 2811-1:2011)
Ta slovenski standard je istoveten z: EN ISO 2811-1:2011
ICS:
87.040 Barve in laki Paints and varnishes
SIST EN ISO 2811-1:2011 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 2811-1:2011

---------------------- Page: 2 ----------------------

SIST EN ISO 2811-1:2011


EUROPEAN STANDARD
EN ISO 2811-1

NORME EUROPÉENNE

EUROPÄISCHE NORM
March 2011
ICS 87.040 Supersedes EN ISO 2811-1:2001
English Version
Paints and varnishes - Determination of density - Part 1:
Pyknometer method (ISO 2811-1:2011)
Peintures et vernis - Détermination de la masse volumique Beschichtungsstoffe - Bestimmung der Dichte - Teil 1:
- Partie 1: Méthode pycnométrique (ISO 2811-1:2011) Pyknometer-Verfahren (ISO 2811-1:2011)
This European Standard was approved by CEN on 19 February 2011.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 2811-1:2011: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 2811-1:2011
EN ISO 2811-1:2011 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 2811-1:2011
EN ISO 2811-1:2011 (E)
Foreword
This document (EN ISO 2811-1:2011) has been prepared by Technical Committee ISO/TC 35 "Paints and
varnishes" in collaboration with Technical Committee CEN/TC 139 “Paints and varnishes” the secretariat of
which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by September 2011, and conflicting national standards shall be
withdrawn at the latest by September 2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 2811-1:2001.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 2811-1:2011 has been approved by CEN as a EN ISO 2811-1:2011 without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 2811-1:2011

---------------------- Page: 6 ----------------------

SIST EN ISO 2811-1:2011

INTERNATIONAL ISO
STANDARD 2811-1
Second edition
2011-03-01


Paints and varnishes — Determination of
density —
Part 1:
Pyknometer method
Peintures et vernis — Détermination de la masse volumique —
Partie 1: Méthode pycnométrique





Reference number
...