Thermal insulation products for buildings - Factory made cellular glass (CG) products - Specification

DOW = DAV + 21 months

Wärmedämmstoffe für Gebäude - Werkmäßig hergestellte Produkte aus Schaumglas (CG) - Spezifikation

Produits isolants thermiques pour le bâtiment - Produits manufacturés en verre cellulaire (CG) - Spécification

Toplotnoizolacijski proizvodi za stavbe - Proizvodi iz penjenega stekla (CG) - Specifikacija

General Information

Status
Not Published
Publication Date
09-Apr-2020
Withdrawal Date
11-Oct-2020
Current Stage
4098 - Decision to abandon - Enquiry
Completion Date
19-Jul-2021

Relations

Buy Standard

Draft
EN 13167:2013+A1:2015/oprA2:2018
English language
17 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-november-2018
Toplotnoizolacijski proizvodi za stavbe - Proizvodi iz penjenega stekla (CG) -
Specifikacija
Thermal insulation products for buildings - Factory made cellular glass (CG) products -
Specification
Wärmedämmstoffe für Gebäude - Werkmäßig hergestellte Produkte aus Schaumglas
(CG) - Spezifikation
Produits isolants thermiques pour le bâtiment - Produits manufacturés en verre cellulaire
(CG) - Spécification
Ta slovenski standard je istoveten z: EN 13167:2012+A1:2015/prA2
ICS:
91.100.60 0DWHULDOL]DWRSORWQRLQ Thermal and sound insulating
]YRþQRL]RODFLMR materials
SIST EN en,fr,de
13167:2013+A1:2015/oprA2:2018
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
EUROPEAN STANDARD
EN 13167:2012+A1:2015
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA2
September 2018
ICS 91.100.60
English Version
Thermal insulation products for buildings - Factory made
cellular glass (CG) products - Specification
Produits isolants thermiques pour le bâtiment - Wärmedämmstoffe für Gebäude - Werkmäßig
Produits manufacturés en verre cellulaire (CG) - hergestellte Produkte aus Schaumglas (CG) -
Spécification Spezifikation
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 88.

This draft amendment A2, if approved, will modify the European Standard EN 13167:2012+A1:2015. If this draft becomes an
amendment, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for
inclusion of this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13167:2012+A1:2015/prA2:2018 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
1 Modifications to the European foreword . 4
2 Modification to the Scope . 4
3 Modifications to Clause 2, Normative references . 4
4 Modifications to Clause 3, Terms, definitions, symbols, units and abbreviated terms . 4
5 Modification to Clause 4, Requirements . 5
6 Modification to 4.1, General . 5
7 Modification to 4.3.2, Dimensional stability. 5
8 Modification to 4.3.3, Compressive strength . 5
9 Modification to 4.3.4, Bending strength . 5
10 Modification to 4.3.5, Point load . 5
11 Modification to 4.3.10, Water vapour transmission . 6
12 Modification to 4.3.12, Release of dangerous substances . 6
13 Modification to 4.3.14, Continuous glowing combustion . 6
14 Modification to 5.3.2, Thermal resistance and thermal conductivity . 6
15 Modification to Clause 6, Designation code . 7
16 Modification to Clause 7, Assessment and Verification of the Constancy of
Performance (AVCP) . 8
17 Modification to Clause 8, Marking and labelling . 8
18 Modification to A.1, General . 9
19 Modification to Annex A.2, Input data . 9
20 Modification to Annex B, Product type determination (PTD) and factory production
control (FPC) . 9
21 Modification to C.4, Evaluation of conformity. 13
22 Modification to D.3, Compressive strength . 13
23 Modification to D.5, Shear strength . 13
24 Modification to Table D.1, Test methods, test speciments, conditions and minimum
testing frequencies . 13
25 Modification to Annex ZA, Clauses of this European Standard addressing the
provisions of the EU Construction Products Regulation . 13

European foreword
This document (EN 13167:2012+A1:2015/prA2:2018) has been prepared by Technical Committee
CEN/TC 88 “Thermal insulating materials and products”, the secretariat of which is held by DIN.
This document is currently submitted to the CEN Enquiry.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association.
For relationship with Construction Products Regulation (CPR), see informative Annex ZA which is an
integral part of this document.
1 Modifications to the European foreword
In the fourth paragraph, delete ", and supports essential requirements of EU Directive(s)."
Delete the ninth paragraph (list of change) and replace the tenth and eleventh paragraph with the
following:
"Amendment A2 modifies EN 13167:2012 and its A1 amendment. This amendment introduces or
corrects:
a) A modified Annex ZA;
b) A modified clause “Release of Dangerous substance”;
c) A modified definition for “Class F” in the clause “Reaction to fire”;
d) Editorial modifications in different parts of the text and linked to the above modifications;
e) Modifications to be in line with the CPR , e.g. PTD replaced by TT;
f) Delete reference to EN 12086 and replace with EN ISO 12572;
g) Delete § 4.3.14 Continuous glowing combustion.".
In the fourteenth paragraph, add the following standard to the end of the list of standards:
"EN 16069, Thermal insulation products for buildings — Factory made products of polyethylene foam
(PEF) — Specification".
2 Modification to the Scope
Replace the third paragraph with:
"This standard describes product characteristics and includes procedures for testing, assessment and
verification of constancy of performance (AVCP), marking and labelling.".
3 Modifications to Clause 2, Normative references
Delete the reference "EN 12086:1997".
Add the following refererences:
"EN 16516, Construction products — Assessment of release of dangerous substances – Determination of
emissions into indoor air"
and
"EN ISO 12572, Thermal insulating products for building applications — Determination of water vapour
transmission properties".
4 Modifications to Clause 3, Terms, definitions, symbols, units and abbreviated
terms
Delete the term and definition for "3.1.6 level" and "3.1.7 class" and modify the numbers of the remaining
terms accordingly.
Delete the following abbreviated terms:
PTD is Product Type Determination (previously named ITT for Initial Type Test)
VCP is Verification of Constancy of Performance (previously named evaluation of conformity)
Add the following abbreviated term:
"
TT is Type Testing
".
5 Modification to Clause 4, Requirements
In the title, replace the term "Requirements” with “Characteristics”.
6 Modification to 4.1, General
Replace the first sentence of the clause with the following:
"Product properties shall be assessed in accordance with Clause 5. To comply with this standard,
products shall meet the characteristics of 4.2, and the characteristics of 4.3 as appropriate.".
7 Modification to 4.3.2, Dimensional stability
Replace in Table 1 - first row in the header, the term “Requirement” with “Characteristic”.
8 Modifications to 4.3.3, Compressive strength
Replace the first sentence with the following:
"Compressive strength, σ , shall be determined in accordance with EN 826.".
m
Add the following paragraph above the Table 2:
"For cellular glass, EN 826:1996 compressive behaviour test method Annex A shall be respected in
which test specimens shall be capped with hot bitumen to cover the open cut cells. In absence of hot
bitumen, an alternative capping shall be foreseen having the same smoothness and cell filling capacity
as hot bitumen, e.g. soft butyl or other elastomeric thin foils or membranes.".
Replace in Table 2 - first row the term “Requirement” with “Characteristic”’.
9 Modification to 4.3.4, Bending strength
Replace in Table 3 - first row in the header the term “Requirement” with “Characteristic”.
10 Modification to 4.3.5, Point load
Replace in Table 4 - first row in the header the term “Requirement” with “Characteristic”.
11 Modification to 4.3.10, Water vapour transmission
Replace the first sentence with the following:
"Water vapour transmission properties shall be determined in accordance with EN ISO 12572, and
declared as the water vapour diffusion resistance factor, μ, for homogeneous products and as the water
vapour resistance, Z, for faced or non-homogeneous products.".
12 Modification to 4.3.12, Release of dangerous substances
Replace the clause with the following:
"Cellular glass products do not contain dangerous substances or releases to indoor climate.
NOTE An informative database covering European and national provisions on dangerous substances is
available at the Construction web site on EUROPA accessed through: http://ec.europa.eu/growth/tools-
databases/cp-ds.".
13 Modification to 4.3.14, Continuous glowing combustion
Delete the whole clause.
14 Modification to 5.3.2, Thermal resistance and thermal conductivity
Replace Table 5 with the following table:
"Table 5 — Test methods, test specimens and conditions
Dimensions in millimetres
Clause Minimum
Test specimen number of
Test Specific
length and
measurements
method conditions
No Title
a
width to get one test
result
EN 12667
Thermal resistance — thermal See EN 12667
4.2.1 1 –
conductivity or EN 12939
EN 12939
4.2.2 Length and width EN 822 Full-size 1 –
(250±5) Pa
4.2.3 Thickness EN 823 Full-size 1
see 4.2.3
4.2.4 Squareness EN 824 Full-size 1 –
4.2.5 Flatness EN 825 Full-size 1 –
Reaction to fire of the product See Clause 5 of
4.2.6 See EN 13501-1 and EN 15715
as placed on the market EN 15715:2009
Dimensional stability at
EN 1603 Full-size 1 Method A
specified temperature
4.3.2
Dimensional stability under
specified temperature and EN 1604 200 × 200 3 –
humidity conditions
Quarter board 3 (CS 400-1000)
4.3.3 Compressive strength EN 826 Annex A
200 × 200 4 (CS 1200-3000)
4.3.4 Bending strength EN 12089  4 Method B
Clause Minimum
Test specimen
number of
Test Specific
length and measurements
method conditions
No Title
a
to get one test
width
result
4.3.5 Point load EN 12430 Full size 1 Annex A
Tensile strength parallel to
4.3.6 EN 1608 500 × 250 5 –
faces
Tensile strength perpendicular
4.3.7 EN 1607 150 × 150 3 –
to faces
Test specimen:
see
EN 826:1996,
4.3.8 Compressive creep EN 1606 200 × 200 3
Annex A with use
of reference
points on the edge
Short term water absorption EN 1609 200 × 200 4 Method A
4.3.9
Long term water absorption 200 × 200 4 Method 1A
EN 12087
EN ISO See 6.1 of
4.3.10 Water vapour transmission 5
12572 EN ISO 12572
4.3.11 Sound absorption EN ISO 3
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.