Metallic materials - Sheet and strip - Determination of plastic strain ratio (ISO 10113:2020, Corrected version 2020-11)

This document specifies a method for determining the plastic strain ratio of flat products (sheet and strip) made of metallic materials.

Metallische Werkstoffe - Blech und Band - Bestimmung der senkrechten Anisotropie (ISO 10113:2020, korrigierte Fassung 2020-11)

Dieses Dokument legt ein Verfahren zur Bestimmung der senkrechten Anisotropie von Flachprodukten (Blech und Band) aus metallischen Werkstoffen fest.

Matériaux métalliques - Tôles et bandes - Détermination du coefficient d'anisotropie plastique (ISO 10113:2020, Version corrigée 2020-11)

Le présent document spécifie une méthode de détermination du coefficient d'anisotropie plastique des produits plats (tôles et bandes) en matériaux métalliques.

Kovinski materiali - Pločevina in trakovi - Ugotavljanje količnika plastične anizotropije (ISO 10113:2020, popravljena različica 2020-11)

General Information

Status
Published
Publication Date
11-Feb-2020
Withdrawal Date
30-Aug-2020
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
12-Feb-2020
Completion Date
12-Feb-2020

Relations

Buy Standard

Standard
EN ISO 10113:2020
English language
31 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard
EN ISO 10113:2020
English language
31 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 10113:2020
01-junij-2020
Nadomešča:
SIST EN ISO 10113:2014
Kovinski materiali - Pločevina in trakovi - Ugotavljanje količnika plastične
anizotropije (ISO 10113:2020)
Metallic materials - Sheet and strip - Determination of plastic strain ratio (ISO
10113:2020)
Metallische Werkstoffe - Blech und Band - Bestimmung der senkrechten Anisotropie
(ISO 10113:2020)
Matériaux métalliques - Tôles et bandes - Détermination du coefficient d'anisotropie
plastique (ISO 10113:2020)
Ta slovenski standard je istoveten z: EN ISO 10113:2020
ICS:
77.040.10 Mehansko preskušanje kovin Mechanical testing of metals
SIST EN ISO 10113:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 10113:2020

---------------------- Page: 2 ----------------------
SIST EN ISO 10113:2020


EN ISO 10113
EUROPEAN STANDARD

NORME EUROPÉENNE

February 2020
EUROPÄISCHE NORM
ICS 77.040.10 Supersedes EN ISO 10113:2014
English Version

Metallic materials - Sheet and strip - Determination of
plastic strain ratio (ISO 10113:2020)
Matériaux métalliques - Tôles et bandes - Metallische Werkstoffe - Blech und Band - Bestimmung
Détermination du coefficient d'anisotropie plastique der senkrechten Anisotropie (ISO 10113:2020)
(ISO 10113:2020)
This European Standard was approved by CEN on 5 January 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10113:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 10113:2020
EN ISO 10113:2020 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 10113:2020
EN ISO 10113:2020 (E)
European foreword
This document (EN ISO 10113:2020) has been prepared by Technical Committee ISO/TC 164
"Mechanical testing of metals" in collaboration with Technical Committee CEN/TC 459/SC 1 “Test
methods for steel (other than chemical analysis)” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by August 2020, and conflicting national standards shall
be withdrawn at the latest by August 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 10113:2014.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 10113:2020 has been approved by CEN as EN ISO 10113:2020 without any modification.


3

---------------------- Page: 5 ----------------------
SIST EN ISO 10113:2020

---------------------- Page: 6 ----------------------
SIST EN ISO 10113:2020
INTERNATIONAL ISO
STANDARD 10113
Third edition
2020-01
Metallic materials — Sheet and strip
— Determination of plastic s
...

SLOVENSKI STANDARD
SIST EN ISO 10113:2020
01-junij-2020
Nadomešča:
SIST EN ISO 10113:2014
Kovinski materiali - Pločevina in trakovi - Ugotavljanje količnika plastične
anizotropije (ISO 10113:2020, popravljena različica 2020-11)
Metallic materials - Sheet and strip - Determination of plastic strain ratio (ISO
10113:2020, Corrected version 2020-11)
Metallische Werkstoffe - Blech und Band - Bestimmung der senkrechten Anisotropie
(ISO 10113:2020, korrigierte Fassung 2020-11)
Matériaux métalliques - Tôles et bandes - Détermination du coefficient d'anisotropie
plastique (ISO 10113:2020, Version corrigée 2020-11)
Ta slovenski standard je istoveten z: EN ISO 10113:2020
ICS:
77.040.10 Mehansko preskušanje kovin Mechanical testing of metals
SIST EN ISO 10113:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 10113:2020

---------------------- Page: 2 ----------------------
SIST EN ISO 10113:2020


EN ISO 10113
EUROPEAN STANDARD

NORME EUROPÉENNE

February 2020
EUROPÄISCHE NORM
ICS 77.040.10 Supersedes EN ISO 10113:2014
English Version

Metallic materials - Sheet and strip - Determination of
plastic strain ratio (ISO 10113:2020, Corrected version
2020-11)
Matériaux métalliques - Tôles et bandes - Metallische Werkstoffe - Blech und Band - Bestimmung
Détermination du coefficient d'anisotropie plastique der senkrechten Anisotropie (ISO 10113:2020,
(ISO 10113:2020, Version corrigée 2020-11) korrigierte Fassung 2020-11)
This European Standard was approved by CEN on 5 January 2020.

This European Standard was corrected and reissued by the CEN-CENELEC Management Centre on 09 December 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATIO N

EUROPÄISCHES KOMITEE FÜR NORMUN G

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10113:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 10113:2020
EN ISO 10113:2020 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 10113:2020
EN ISO 10113:2020 (E)
European foreword
This document (EN ISO 10113:2020) has been prepared by Technical Committee ISO/TC 164
"Mechanical testing of metals" in collaboration with Technical Committee CEN/TC 459/SC 1 “Test
methods for steel (other than chemical analysis)” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by August 2020, and conflicting national standards shall
be withdrawn at the latest by August 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 10113:2014.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 10113:2020, Corrected version 2020-11 has been appr
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.