EN ISO 105-B10:2011
(Main)Textiles - Tests for colour fastness - Part B10: Artificial weathering - Exposure to filtered xenon-arc radiation (ISO 105-B10:2011)
Textiles - Tests for colour fastness - Part B10: Artificial weathering - Exposure to filtered xenon-arc radiation (ISO 105-B10:2011)
ISO 105-B10:2011 specifies a procedure for exposing textiles to artificial weathering in xenon-arc apparatus, including the action of liquid water and water vapour, in order to determine the weather resistance of the colour of textiles. The exposure is carried out in a test chamber with a filtered xenon-arc light source simulating solar spectral irradiance according to CIE 85:1989, Table 4. The method can be used either for determining the colour fastness or the ageing behaviour of the textile under test. The method is also applicable to white (bleached or optically brightened) textiles.
Textilien - Farbechtheitsprüfungen - Teil B10: Künstliche Bewitterung - Belichtung mit gefilterter Xenonbogenstrahlung (ISO 105-B10:2011)
Dieser Teil der ISO 105 legt ein Verfahren fest, bei dem Textilien einer künstlichen Bewitterung in einem
Xenonbogen-Prüfgerät, einschließlich der Einwirkung von Wasser und Wasserdampf ausgesetzt werden, um
die Wetterbeständigkeit der Farbe von Textilien zu bestimmen. Die Belichtung erfolgt in einer Prüfkammer mit
einer gefilterten Xenonbogen-Lichtquelle, die die solare spektrale Bestrahlungsstärke entsprechend
CIE 85:1989, Tabelle 4 simuliert. Das Verfahren kann sowohl für die Bestimmung der Farbechtheit als auch
des Alterungsverhaltens des zu prüfenden Textils verwendet werden. Das Verfahren gilt darüber hinaus für
weiße (gebleichte oder optisch aufgehellte) Textilien.
Textiles - Essais de solidité des coloris - Partie B10: Exposition aux intempéries artificielles - Exposition au rayonnement filtré d'une lampe à arc au xénon (ISO 105-B10:2011)
Tekstilije - Preskušanje barvne obstojnosti - Del B10: Umetni vremenski vplivi - Izpostavljenost filtriranemu sevanju ksenonskih obločnih svetilk (ISO 105-B10:2011)
Ta del ISO 105 določa postopek za izpostavljanje tekstilij umetnim vremenskim vplivom v aparatih s ksenonskimi obločnimi svetilkami, vključno z učinkom tekoče vode ali vodnih hlapov, za določanje odpornosti barv tekstilij proti vremenu. Izpostavljenost je izvedena v preskusni komori s filtriranim ksenonskim obločnim virom svetlobe, ki spodbuja
sončno spektralno žarenje v skladu s CIE 85:1989, preglednico 4. Metoda se lahko uporabi ali za določanje barvne obstojnosti ali obnašanje staranja tekstilij med preskusom. Metoda prav tako velja za bele (beljene ali optično osvetljene) tekstilije.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2011
7HNVWLOLMH3UHVNXãDQMHEDUYQHREVWRMQRVWL'HO% 8PHWQLYUHPHQVNLYSOLYL
,]SRVWDYOMHQRVWILOWULUDQHPXVHYDQMXNVHQRQVNLKREORþQLKVYHWLON ,62
%
Textiles - Tests for colour fastness - Part B10: Artificial weathering - Exposure to filtered
xenon-arc radiation (ISO 105-B10:2011)
Textilien - Farbechtheitsprüfungen - Teil B10: Künstliche Bewetterung - Beanspruchung
gegen gefilterte Xenonbogenstrahlung (ISO 105-B10:2011)
Textiles - Essais de solidité des teintures - Partie B10: Exposition aux intempéries
artificielles - Exposition au rayonnement filtré d'une lampe à arc au xénon (ISO 105-
B10:2011)
Ta slovenski standard je istoveten z: EN ISO 105-B10:2011
ICS:
59.080.01 Tekstilije na splošno Textiles in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 105-B10
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2011
ICS 59.080.01
English Version
Textiles - Tests for colour fastness - Part B10: Artificial
weathering - Exposure to filtered xenon-arc radiation (ISO 105-
B10:2011)
Textiles - Essais de solidité des coloris - Partie B10: Textilien - Farbechtheitsprüfungen - Teil B10: Künstliche
Exposition aux intempéries artificielles - Exposition au Bewitterung - Belichtung mit gefilterter
rayonnement filtré d'une lampe à arc au xénon (ISO 105- Xenonbogenstrahlung (ISO 105-B10:2011)
B10:2011)
This European Standard was approved by CEN on 30 September 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 105-B10:2011: E
worldwide for CEN national Members.
Contents Page
Foreword .3
Foreword
This document (EN ISO 105-B10:2011) has been prepared by Technical Committee ISO/TC 38 "Textiles" in
collaboration with Technical Committee CEN/TC 248 “Textiles and textile products” the secretariat of which is
held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by April 2012, and conflicting national standards shall be withdrawn at the
latest by April 2012.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 105-B10:2011 has been approved by CEN as a EN ISO 105-B10:2011 without any
modification.
INTERNATIONAL ISO
STANDARD 105-B10
First edition
2011-10-01
Textiles — Tests for colour fastness —
Part B10:
Artificial weathering — Exposure to
filtered xenon-arc radiation
Textiles — Essais de solidité des coloris —
Partie B10: Exposition aux intempéries artificielles — Exposition au
rayonnement filtré d’une lampe à arc au xénon
Reference number
ISO 105-B10:2011(E)
©
ISO 2011
ISO 105-B10:2011(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2011
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO’s
member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2011 – All rights reserved
ISO 105-B10:2011(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope .1
2 Normative references .1
3 Terms and definitions .1
4 Principle .2
5 Apparatus and reference materials .3
5.1 Laboratory light source .3
5.2 Test chamber .4
5.3 Radiometer .4
5.4 Temperature sensors .4
5.5 Wetting and humidity-control equipment .6
5.6 Specimen holders .6
5.7 Spectrophotometer .6
5.8 Colour-matching lamp .6
5.9 Grey scale for assessing change in colour .7
5.10 Reference materials .7
5.11 Metal or clear plastic sheet (PMA) .7
6 Test specimens .7
6.1 For artificial weathering with water spray .7
6.2 For artificial weathering without water spray .8
7 Exposure conditions .8
7.1 Sets of exposure conditions .8
7.2 Exposure duration .8
7.3 Correlation .8
8 Procedure .9
8.1 Checking of the apparatus .9
8.2 Mounting of the test specimens .9
8.3 Exposure .9
9 Assessment .9
9.1 Colour change .9
9.2 Ageing behaviour .10
10 Test report .10
Annex A (informative) Typical applications and test durations .12
Bibliography .13
© ISO 2011 – All rights reserved iii
ISO 105-B10:2011(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International
Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 105-B10 was prepared by Technical Committee ISO/TC 38, Textiles, Subcommittee SC 1, Tests for
coloured textiles and colorants.
ISO 105 consists of many parts designated by a part letter and a two-digit serial number (e.g. A01), under the
general title Textiles — Tests for colour fastness. A complete list of these parts is given in ISO 105-A01.
iv © ISO 2011 – All rights reserved
ISO 105-B10:2011(E)
Introduction
All four exposure conditions described in this part of ISO 105 are different from the method described in
ISO 105-B04. This part of ISO 105 is not intended to replace ISO 105-B04 but to specify additional test options.
Nevertheless, ISO/TC 38 might consider withdrawing ISO 105-B04 at a later date, after the textile industry has
been able to achieve comprehensive experience using this part of ISO 105.
© ISO 2011 – All rights reserved v
INTERNATIONAL STANDARD ISO 105-B10:2011(E)
Textiles — Tests for colour fastness —
Part B10:
Artificial weathering — Exposure to filtered xenon-arc radiation
1 Scope
This part of ISO 105 specifies a procedure for exposing textiles to artificial weathering in xenon-arc apparatus,
including the action of liquid water and water vapour, in order to determine the weather resistance of the colour
of textiles. The exposure is carried out in a test chamber with a filtered xenon-arc light source simu
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.