EN ISO 6875:1996
(Main)Dental equipment - Dental patient chair (ISO 6875:1995)
Dental equipment - Dental patient chair (ISO 6875:1995)
Applies to all dental patient chairs, regardless of their construction and also regardless of whether they are operated manually or electrically or by other means, or as a combination of these. Specifies requirements, test methods, manufacturer's information, marking and packaging. Refers to 601-1:1988, but takes priority over specifications in IEC 601-1.
Zahnärztliche Ausrüstung - Zahnärztlicher Patientenstuhl (ISO 6875:1995)
Diese Internationale Norm gilt für alle Arten von zahnärztlichen Patientenstühlen, unabhängig von ihrer Konstruktion und auch unabhängig davon, ob sie elektrisch betrieben oder kombiniert werden oder nicht. Sie legt Anforderungen, Prüfmethoden, Herstellerinformationen, Kennzeichnung und Verpackung fest.
Matériel dentaire - Fauteuil dentaire (ISO 6875:1995)
La présente Norme internationale est applicable à tous les fauteuils dentaires, quelle que soit leur construction et qu'ils fonctionnent manuellement ou électriquement ou par tout autre moyen, ou par combinaison de ces modes de fonctionnement. Elle contient des prescriptions, des méthodes d'essai, ainsi que des spécifications relatives aux informations à fournir par le fabricant, au marquage et à l'emballage.
Dental equipment - Dental patient chair (ISO 6875:1995)
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Dental equipment - Dental patient chair (ISO 6875:1995)Zahnärztliche Ausrüstung - Zahnärztlicher Patientenstuhl (ISO 6875:1995)Matériel dentaire - Fauteuil dentaire (ISO 6875:1995)Dental equipment - Dental patient chair (ISO 6875:1995)11.060.20Dental equipmentICS:Ta slovenski standard je istoveten z:EN ISO 6875:1996SIST EN ISO 6875:2000en01-januar-2000SIST EN ISO 6875:2000SLOVENSKI
STANDARD
SIST EN ISO 6875:2000
SIST EN ISO 6875:2000
SIST EN ISO 6875:2000
SIST EN ISO 6875:2000
SIST EN ISO 6875:2000
INTERNATIONAL STANDARD IS0 6875 Second edition 1995-02-01 Dental patient chair Fauteuil dentaire Reference number IS0 6875:1995(E) SIST EN ISO 6875:2000
IS0 6875:1995(E) Foreword IS0 (the International Organization for Standardization) is a worldwide federation of national standards bodies (IS0 member bodies). The work of preparing International Standards is normally carried out through IS0 technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. IS0 collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. International Standard IS0 6875 was prepared by Technical Committee lSO/TC 106, Dentistry, Subcommittee SC 6, Dental equipment. This second edition cancels and replaces the first edition (IS0 6875:1984), of which it constitutes a technical revision. Annex A forms an integral part of this International Standard. 0 IS0 1995 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher. International Organization for Standardization Case Postale 56 l CH-1211 Geneve 20 l Switzerland Printed in Switzerland ii SIST EN ISO 6875:2000
Q IS0 IS0 6875:1995(E) Introduction This International Standard takes priority over IEC 601-I as specified in the individual clauses of this International Standard. Only the specifications laid down in this International Standard are appli- cable. This International Standard refers to IEC 601-I :I 988, the basic standard on safety of medical electrical equipment, wherever relevant, by stating the respective clause numbers of IEC 601-I. . . . III SIST EN ISO 6875:2000
This page intentionally left blank SIST EN ISO 6875:2000
INTERNATIONAL STANDARD 0 IS0 IS0 6875:1995(E) Dental patient chair 1 Scope the practice of dentistry and/or its associated pro- cedures. This International Standard applies to all dental patient chairs, regardless of their construction and also re- gardless of whether they are operated manually or electrically or by other means, or as a combination of these. 3.2 dental patient chair: (1) Item of d t I en a equipment, provided with a range of movements, which is designed to support and r position the patient for treatment. [ISO 1942-4:1989, It specifies requirements, test methods, manufac- definition 4.0221 turer’s information, marking and packaging. 2 Normative references The following standards contain provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publi- cation, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most re- cent editions of the standards indicated below. Members of IEC and IS0 maintain registers of cur- rently valid International Standards. (2) Permanently fixed or free-standing chair, adjust- able in height and posture used for supporting a pa- tient in the seated or supine position and having the means for positioning the head of the patient for dental treatment. 4 Classification This classification applies to electrically operated dental patient chairs only. 4.1 According to type of protection against electric shock IS0 8191-1:1987, Furniture - Assessment of the ignitability of upholstered furniture - Part I: Ignition source: smouldering cigarette. Dental patient chairs are classified in accordance with IEC 601-I as follows: IS0 9687:1993, Dental equipment - Graphical sym- a) Class I equipment bols. I EC 601-1: 1988, Medical electrical equipment - Part 7: General requirements for safety. 3 Definitions For the purposes of this International Standard, the definitions given in IEC 601-l and the following defi
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.