EN 13155:2020+A1:2025/AC:2026
(Corrigendum)Crane - Safety - Non-fixed load lifting attachments
Crane - Safety - Non-fixed load lifting attachments
This document specifies safety requirements for the following non-fixed load lifting attachments for cranes, hoists and manually controlled load manipulating devices:
a) plate clamps;
b) vacuum lifters:
1) self-priming;
2) non-self-priming (pump, venturi, turbine);
c) lifting magnets:
1) electric lifting magnets (battery fed and mains-fed);
2) permanent lifting magnets;
3) electro-permanent lifting magnets;
d) lifting beams;
e) C-hooks;
f) lifting forks;
g) clamps;
h) lifting insert systems for use in normal weight concrete,
as defined in Clause 3.
This document does not give requirements for:
— non-fixed load lifting attachments in direct contact with foodstuffs or pharmaceuticals requiring a high level of cleanliness for hygiene reasons;
— hazards resulting from handling specific hazardous materials (e.g. explosives, hot molten masses, radiating materials);
— hazards caused by operation in an explosive atmosphere;
— hazards caused by noise;
— hazards relating to the lifting of persons;
— electrical hazards;
— hazards due to hydraulic and pneumatic components.
For high risk applications not covered by this standard, EN 13001-2:2021, 4.3.2 gives guidance to deal with them.
This document covers the proof of static strength, the elastic stability and the proof of fatigue strength.
This document does not generally applies to attachments intended to lift above people. Some attachments are suitable for that purpose if equipped with additional safety features. In such cases the additional safety features are specified in the specific requirements.
This document does not cover slings, ladles, expanding mandrels, buckets, grabs, or grab buckets. This document does not cover power operated container handling spreaders, which are in the scope of EN 15056.
This document is not applicable to non-fixed load attachments manufactured before the date of its publication.
Krane - Sicherheit - Lose Lastaufnahmemittel
Appareils de levage à charge suspendue - Sécurité - Accessoires de levage amovibles
Žerjav - Varnost - Priključki za dvigovanje bremen
Ta dokument določa varnostne zahteve za naslednje nefiksne dvižne pripomočke za žerjave, dvigala in ročno upravljane naprave za manipulacijo bremen:
a) klešče za plošče;
b) vakuumski dvigovalci:
1) samosesalni;
2) nesamosesalni (črpalka, venturi, turbina);
c) dvižni magneti:
1) električni dvižni magneti (napajani z baterijo in iz omrežja);
2) trajni dvižni magneti;
3) elektro-trajni dvižni magneti;
d) dvižni nosilci;
e) C-kavlji;
f) dvižne vilice;
g) klešče;
h) sistemi za vgradnjo dvižnih vložkov za uporabo v betonu normalne teže,
kot je opredeljeno v točki 3.
Ta dokument ne določa zahtev za:
— nefiksne dvižne pripomočke v neposrednem stiku s prehrambnimi izdelki ali farmacevtskimi izdelki, ki zahtevajo visoko stopnjo čistoče iz higienskih razlogov;
— nevarnosti, ki izhajajo iz ravnanja s specifičnimi nevarnimi materiali (npr. eksplozivi, vroče taline, sevalni materiali);
— nevarnosti, ki jih povzroča delovanje v eksplozivni atmosferi;
— nevarnosti, ki jih povzroča hrup;
— nevarnosti v zvezi z dvigovanjem oseb;
— električne nevarnosti;
— nevarnosti zaradi hidravličnih in pnevmatskih komponent.
Za aplikacije z visokim tveganjem, ki niso zajete v tem standardu, EN 13001-2:2021, 4.3.2 ponuja smernice za njihovo obravnavo.
Ta dokument zajema dokaz statične trdnosti, elastične stabilnosti in dokaz utrujenostne trdnosti.
Ta dokument se na splošno ne uporablja za pripomočke, namenjene dvigovanju nad ljudmi. Nekateri pripomočki so primerni za ta namen, če so opremljeni z dodatnimi varnostnimi funkcijami. V takih primerih so dodatne varnostne funkcije določene v posebnih zahtevah.
Ta dokument ne zajema zank, loncev, razširljivih vreten, vedra, grabil ali grabilnih vedra. Ta dokument ne zajema pogonsko upravljanih razširjevalnikov za manipulacijo kontejnerjev, ki so v okviru EN 15056.
Ta dokument se ne uporablja za nefiksne dvižne pripomočke, izdelane pred datumom njegove objave.
General Information
- Status
- Published
- Publication Date
- 24-Feb-2026
- Technical Committee
- CEN/TC 147 - Cranes - Safety
- Drafting Committee
- CEN/TC 147/WG 21 - Non-fixed load lifting attachments
- Current Stage
- 6060 - Definitive text made available (DAV) - Publishing
- Start Date
- 25-Feb-2026
- Completion Date
- 25-Feb-2026
Relations
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 06-Dec-2025
Frequently Asked Questions
EN 13155:2020+A1:2025/AC:2026 is a corrigendum published by the European Committee for Standardization (CEN). Its full title is "Crane - Safety - Non-fixed load lifting attachments". This standard covers: This document specifies safety requirements for the following non-fixed load lifting attachments for cranes, hoists and manually controlled load manipulating devices: a) plate clamps; b) vacuum lifters: 1) self-priming; 2) non-self-priming (pump, venturi, turbine); c) lifting magnets: 1) electric lifting magnets (battery fed and mains-fed); 2) permanent lifting magnets; 3) electro-permanent lifting magnets; d) lifting beams; e) C-hooks; f) lifting forks; g) clamps; h) lifting insert systems for use in normal weight concrete, as defined in Clause 3. This document does not give requirements for: — non-fixed load lifting attachments in direct contact with foodstuffs or pharmaceuticals requiring a high level of cleanliness for hygiene reasons; — hazards resulting from handling specific hazardous materials (e.g. explosives, hot molten masses, radiating materials); — hazards caused by operation in an explosive atmosphere; — hazards caused by noise; — hazards relating to the lifting of persons; — electrical hazards; — hazards due to hydraulic and pneumatic components. For high risk applications not covered by this standard, EN 13001-2:2021, 4.3.2 gives guidance to deal with them. This document covers the proof of static strength, the elastic stability and the proof of fatigue strength. This document does not generally applies to attachments intended to lift above people. Some attachments are suitable for that purpose if equipped with additional safety features. In such cases the additional safety features are specified in the specific requirements. This document does not cover slings, ladles, expanding mandrels, buckets, grabs, or grab buckets. This document does not cover power operated container handling spreaders, which are in the scope of EN 15056. This document is not applicable to non-fixed load attachments manufactured before the date of its publication.
This document specifies safety requirements for the following non-fixed load lifting attachments for cranes, hoists and manually controlled load manipulating devices: a) plate clamps; b) vacuum lifters: 1) self-priming; 2) non-self-priming (pump, venturi, turbine); c) lifting magnets: 1) electric lifting magnets (battery fed and mains-fed); 2) permanent lifting magnets; 3) electro-permanent lifting magnets; d) lifting beams; e) C-hooks; f) lifting forks; g) clamps; h) lifting insert systems for use in normal weight concrete, as defined in Clause 3. This document does not give requirements for: — non-fixed load lifting attachments in direct contact with foodstuffs or pharmaceuticals requiring a high level of cleanliness for hygiene reasons; — hazards resulting from handling specific hazardous materials (e.g. explosives, hot molten masses, radiating materials); — hazards caused by operation in an explosive atmosphere; — hazards caused by noise; — hazards relating to the lifting of persons; — electrical hazards; — hazards due to hydraulic and pneumatic components. For high risk applications not covered by this standard, EN 13001-2:2021, 4.3.2 gives guidance to deal with them. This document covers the proof of static strength, the elastic stability and the proof of fatigue strength. This document does not generally applies to attachments intended to lift above people. Some attachments are suitable for that purpose if equipped with additional safety features. In such cases the additional safety features are specified in the specific requirements. This document does not cover slings, ladles, expanding mandrels, buckets, grabs, or grab buckets. This document does not cover power operated container handling spreaders, which are in the scope of EN 15056. This document is not applicable to non-fixed load attachments manufactured before the date of its publication.
EN 13155:2020+A1:2025/AC:2026 is classified under the following ICS (International Classification for Standards) categories: 53.020.30 - Accessories for lifting equipment. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 13155:2020+A1:2025/AC:2026 has the following relationships with other standards: It is inter standard links to EN ISO/ASTM 52940:2025, EN ISO/ASTM 52948:2026, EN 13155:2020+A1:2025. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 13155:2020+A1:2025/AC:2026 is associated with the following European legislation: EU Directives/Regulations: 2006/42/EC; Standardization Mandates: M/396. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 13155:2020+A1:2025/AC:2026 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-junij-2026
Žerjav - Varnost - Priključki za dvigovanje bremen
Crane - Safety - Non-fixed load lifting attachments
Krane - Sicherheit - Lose Lastaufnahmemittel
Appareils de levage à charge suspendue - Sécurité - Accessoires de levage amovibles
Ta slovenski standard je istoveten z: EN 13155:2020+A1:2025/AC:2026
ICS:
53.020.30 Pribor za dvigalno opremo Accessories for lifting
equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN 13155:2020+A1:2025/AC
EUROPEAN STANDARD
NORME EUROPÉENNE
February 2026
EUROPÄISCHE NORM
ICS 53.020.30
English version
Crane - Safety - Non-fixed load lifting attachments
Appareils de levage à charge suspendue - Krane - Sicherheit - Lose Lastaufnahmemittel
Sécurité - Accessoires de levage amovibles
This corrigendum becomes effective on 25 February 2026 for incorporation in the official
English version of the EN.
This Corrigendum was corrected and reissued by the CEN-CENELEC Management Centre on
18 March 2026.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATIO N
EUROPÄISCHES KOMITEE FÜR NORMUN G
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2026 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members.
Tous droits d'exploitation sous quelque forme et de quelque manière que ce soit réservés dans le monde entier
aux membres nationaux du CEN.
Alle Rechte der Verwertung, gleich in welcher Form und in welchem Verfahren, sind weltweit den nationalen
Mitgliedern von CEN vorbehalten.
Ref. No.:EN 13155:2020+A1:2025/AC:2026 E
EN 13155:2020+A
...