EN 14420-2:2013

Hose fittings with clamp units - Part 2: Hose side parts of hose tail

This European Standard specifies requirements for the hose tail of hose fittings according to EN 14420 1 for use with clamp units according to EN 14420 3. Furthermore, it specifies materials for hose fittings with clamp units according to EN 14420-4 to EN 14420-8.
Maximum working pressure is 25 bar;  maximum working temperature is 65 °C.

Schlaucharmaturen mit Klemmfassungen - Teil 2: Schlauchseitige Stutzenteile

Diese Europäische Norm legt Anforderungen für den schlauchseitigen Stutzenteil von Schlaucharmaturen nach EN 14420-1, mit Klemmfassungen nach EN 14420-3 fest. Darüber hinaus legt sie Werkstoffe für Schlaucharmaturen mit Klemmfassungen nach EN 14420-4 bis EN 14420-8 fest.
Der höchst zulässige Arbeitsdruck beträgt 25 bar ), die höchst zulässige Arbeitstemperatur beträgt 65 °C.

Raccords pour flexibles avec demi-coquille - Partie 2: Douilles pour flexibles

La présente Norme européenne spécifie les exigences applicables aux douilles pour raccords pour flexibles conformes à l’EN 14420 1, destinées à être utilisées avec des demi-coquilles conformes à l’EN 14420 3. En outre, elle spécifie les matériaux pour raccords pour flexibles avec demi-coquille conformes aux EN 14420-4 à EN 14420-8.
La pression de service maximale est de 25 bar ) et la température de service maximale est de 65 °C.

Cevni fitingi z objemkami - 2. del: Stranski cevni nastavki

Ta evropski standard določa zahteve za cevne nastavke cevnih fitingov v skladu z EN 14420-1 za uporabo z objemkami iz EN 14420-3. Poleg tega določa materiale za cevne fitinge z objemkami v skladu z EN 14420-4 do EN 14420-8. Največji delovni tlak je 25 barov1); najvišja delovna temperatura je 65 °C.

General Information

• Status: Withdrawn
• Publication Date: 09-Jul-2013
• Withdrawal Date: 30-Aug-2022
• ICS: 23.040.70 - Hoses and hose assemblies
• Technical Committee: CEN/TC 218 - Rubber and plastics hoses and hose assemblies
• Drafting Committee: CEN/TC 218/WG 1 - Rubber and plastics hoses and hose assemblies for industrial, chemical and petrochemical applications
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 31-Aug-2022
• Ref Project: SIST EN 14420-2:2013 - Hose fittings with clamp units - Part 2: Hose side parts of hose tail

Relations

• Replaces: EN 14420-2:2004 - Hose fittings with clamp units - Part 2: Hose side parts of hose tail
• Effective Date: 03-Jul-2010
• Replaced By: EN 14420-2:2022 - Hose fittings with clamp units - Part 2: Hose side parts of hose tail
• Effective Date: 27-Nov-2019

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Cevni fitingi z objemkami - 2. del: Stranski cevni nastavkiSchlaucharmaturen mit Klemmfassungen - Teil 2: Schlauchseitige StutzenteileRaccords pour flexibles avec demi-coquille - Partie 2: Douilles pour flexiblesHose fittings with clamp units - Part 2: Hose side parts of hose tail23.040.60Prirobnice, oglavki in spojni elementiFlanges, couplings and jointsICS:Ta slovenski standard je istoveten z:EN 14420-2:2013SIST EN 14420-2:2013en,fr,de01-september-2013SIST EN 14420-2:2013SLOVENSKI
STANDARDSIST EN 14420-2:20051DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 14420-2
July 2013 ICS 23.040.70 Supersedes EN 14420-2:2004English Version
Hose fittings with clamp units - Part 2: Hose side parts of hose tail
Raccords pour flexibles avec demi-coquille - Partie 2: Douilles pour flexibles
Schlaucharmaturen mit Klemmfassungen - Teil 2: Schlauchseitige Stutzenteile This European Standard was approved by CEN on 15 May 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14420-2:2013: ESIST EN 14420-2:2013
...