Camping tents (ISO 5912:2003)

ISO 5912:2003 specifies the requirements on safety, performance and fitness for use of camping tents.
It applies to types and classes of tents for camping and outdoor purposes.

Campingzelte (ISO 5912:2003)

Diese Internationale Norm legt Anforderungen an die Sicherheit, die Funktion und Gebrauchstauglichkeit von
Campingzelten (im Folgenden Zelte genannt) fest.
Sie gilt für die in 3.1 aufgeführten Typen und Klassen von Zelten für den Einsatz im Camping- und Outdoor-
Bereich.
ANMERKUNG Für Caravan-Vorzelte gelten ISO 8936 und ISO 8937. Begriffe bezüglich Campingzelte und Caravan-
Vorzelte siehe ISO 7152.

Tentes de camping (ISO 5912:2003)

L'ISO 5912:2003 spécifie les exigences relatives à la sécurité, au fonctionnement et à l'aptitude à l'emploi des tentes de camping.
Elle s'applique aux types et aux classes de tentes destinées au camping et à l'usage en extérieur.

Šotori za taborjenje (ISO 5912:2003)

General Information

Status
Withdrawn
Publication Date
14-Jun-2005
Withdrawal Date
30-Sep-2011
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
01-Oct-2011
Completion Date
01-Oct-2011

Relations

Effective Date
15-Apr-2009

Buy Standard

Standard
EN ISO 5912:2005
English language
28 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-november-2005
Šotori za taborjenje (ISO 5912:2003)
Camping tents (ISO 5912:2003)
Campingzelte (ISO 5912:2003)
Tentes de camping (ISO 5912:2003)
Ta slovenski standard je istoveten z: EN ISO 5912:2005
ICS:
97.200.30 Oprema za taborjenje in Camping equipment and
tabori camp-sites
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 5912
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2005
ICS 97.200.30
English version
Camping tents (ISO 5912:2003)
Tentes de camping (ISO 5912:2003) Campingzelte (ISO 5912:2003)
This European Standard was approved by CEN on 26 May 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 5912:2005: E
worldwide for CEN national Members.

Foreword
The text of ISO 5912:2003 has been prepared by Technical Committee ISO/TC 83 "Sports and
recreational equipment” of the International Organization for Standardization (ISO) and has been
taken over as EN ISO 5912:2005 by Technical Committee CEN/TC 136 "Sports, playground and
other recreational equipment", the secretariat of which is held by DIN.

This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by December 2005, and conflicting national
standards shall be withdrawn at the latest by December 2005.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

Endorsement notice
The text of ISO 5912:2003 has been approved by CEN as EN ISO 5912:2005 without any
modifications.
INTERNATIONAL ISO
STANDARD 5912
Third edition
2003-11-15
Camping tents
Tentes de camping
Reference number
ISO 5912:2003(E)
©
ISO 2003
ISO 5912:2003(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

©  ISO 2003
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2003 — All rights reserved

ISO 5912:2003(E)
Contents Page
Foreword. iv
1 Scope. 1
2 Normative references . 1
3 Terms and definitions. 2
4 Requirements . 4
4.1 Overview . 4
4.2 General requirements . 4
4.2.1 Fabrics. 4
4.2.2 Living room. 4
4.2.3 Sleeping area. 5
4.2.4 Storage space. 5
4.2.5 Material connections . 5
4.2.6 Ground-sheet. 5
4.2.7 External plastics materials. 6
4.2.8 Stability . 6
4.2.9 Ventilation. 6
4.2.10 Insect protection . 7
4.2.11 Resistance to penetration by rain . 7
4.2.12 Design of the inner tent. 7
4.2.13 Tent exits. 7
4.2.14 Dimensional stability of tents in synthetic fabrics . 7
4.2.15 Frame. 7
4.2.16 Zip fasteners. 8
4.2.17 Attachment devices . 8
4.2.18 Tent and pole bags . 8
4.2.19 Advice to occupiers . 8
4.2.20 Accessories . 9
4.3 Specific requirements for the different types of tent . 9
4.3.1 Sleeping tents. 9
4.3.2 Touring tents . 11
4.3.3 Residential tents . 12
5 Testing. 13
5.1 Clear height and seats for tents of type S, class st, and tents of type T . 13
5.2 Storage space. 14
5.3 Zip fasteners. 14
5.3.1 Determination of the lateral strength of the zip fastener . 14
5.3.2 Testing of behaviour under conditions of continuous reciprocating movement . 15
5.4 Corrosion test. 16
5.5 Ground fastening . 16
5.6 Rain test . 16
5.7 Material connection test. 17
5.8 Resistance of plastic sheets to discolouration under the effect of moisture. 17
5.9 Dimensional stability of tents in synthetic fabrics . 17
6 Instructions for use. 18
7 Marking. 19
Annex A (informative) Marking of tents. 20

ISO 5912:2003(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 5912 was prepared by Technical Committee ISO/TC 83, Sports and recreational equipment,
Subcommittee SC 2, Camping tents.
This third edition cancels and replaces the second edition (ISO 5912:1993) and ISO 5912:1993/Amd.1:1998,
which have been technically revised.

iv © ISO 2003 — All rights reserved

INTERNATIONAL STANDARD ISO 5912:2003(E)

Camping tents
1 Scope
This International Standard specifies the requirements on safety, performance and fitness for use of camping
tents (called “tents” throughout the text).
It applies to types and classes of tents for camping and outdoor purposes as defined in 3.1.
NOTE For caravan awnings ISO 8936 and ISO 8937 apply. For terms relating to camping tents and caravan awnings,
see ISO 7152.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO 105-A02:1993, Textiles — Tests for colour fastness — Part A02
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.