iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 13508-2:2003/AC:2007

(Corrigendum)

Conditions of drain and sewer systems outside buildings - Part 2: Visual inspection coding system

Conditions of drain and sewer systems outside buildings - Part 2: Visual inspection coding system

TC - Modification to Annexes E and F

Zustandserfassung von Entwässerungssystemen außerhalb von Gebäuden - Teil 2: Kodiersystem für die optische Inspektion

Condition des réseaux d'évacuation et d'assainissement à l'extérieur des bâtiments - Partie 2: Système de codage de l'inspection visuelle

Ugotavljanje stanja drenažnih in kanalizacijskih sistemov zunaj stavb - 2. del: Sistem za vizualni nadzor in kodiranje

General Information

Status
Withdrawn
Publication Date
20-Mar-2007
Withdrawal Date
17-May-2011
ICS
93.030 - External sewage systems
Technical Committee
CEN/TC 165 - Waste water engineering
Drafting Committee
CEN/TC 165/WG 22 - Drainage outside buildings
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
18-May-2011
Completion Date
18-May-2011
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
89/106/EEC - Construction products
Ref Project
SIST EN 13508-2:2003/AC:2007 - Conditions of drain and sewer systems outside buildings - Part 2: Visual inspection coding system

Relations

Merged Into
EN 13508-2:2003+A1:2011 - Investigation and assessment of drain and sewer systems outside buildings - Part 2: Visual inspection coding system
Effective Date
05-Mar-2011
Corrects
EN 13508-2:2003 - Conditions of drain and sewer systems outside buildings - Part 2: Visual inspection coding system
Effective Date
22-Dec-2008

Buy Standard

EN 13508-2:2003/AC:2007EN 13508-2:2003/AC:2007
PreviousNext
Corrigendum
EN 13508-2:2003/AC:2007
English, French and German language
3 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Conditions of drain and sewer systems outside buildings - Part 2: Visual inspection coding systemUgotavljanje stanja drenažnih in kanalizacijskih sistemov zunaj stavb - 2. del: Sistem za vizualni nadzor in kodiranjeCondition des réseaux d'évacuation et d'assainissement a l'extérieur des bâtiments - Partie 2: Systeme de codage de l'inspection visuelleZustandserfassung von Entwässerungssystemen außerhalb von Gebäuden - Teil 2: Kodiersystem für die optische InspektionTa slovenski standard je istoveten z:EN 13508-2:2003/AC:2007SIST EN 13508-2:2003/AC:2007en,fr,de93.030Zunanji sistemi za odpadno vodoExternal sewage systemsICS:SLOVENSKI
STANDARDSIST EN 13508-2:2003/AC:200701-september-2007







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13508-2:2003/ACMarch 2007Mars 2007März 2007ICS 93.030English versionVersion FrançaiseDeutsche FassungConditions of drain and sewer systems outside buildings - Part 2: Visualinspection coding systemCondition des réseaux d'évacuation etd'assainissement à l'extérieur desbâtiments - Partie 2: Système de codagede l'inspection visuelleZustandserfassung vonEntwässerungssystemen außerhalb vonGebäuden - Teil 2: Kodiersystem für dieoptische InspektionThis corrigendum becomes effective on 21 March 2007 for incorporation in the three official languageversions of the EN.Ce corrigendum prendra effet le 21 mars 2007 pour incorporation dans les trois versions linguistiquesofficielles de la EN.Die Berichtigung tritt am 21.März 2007 zur Einarbeitung in die drei offiziellen Sprachfassungen derEN in Kraft.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagemen
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 11296-9:2022(Main)
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 9: Lining with a rigidly anchored plastics inner layer (ISO 11296-9:2022)
SIST EN ISO 11296-9:2023

This document, in conjunction with ISO 11296‑1, specifies the requirements and test methods for pipes and fittings for the renovation of underground non-pressure drainage and sewerage networks by lining with a single rigid annulus of structural cementitious grout formed behind a plastics inner layer. This plastics layer serves as permanent formwork anchored to the grout.
This document is applicable to plastics inner layers and grout systems with or without steel reinforcement. It does not apply to the structural design of the lining system.
NOTE      Systems with multiple annuli are available, but these are controlled by patent rights and not covered by this document.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12889:2022(Main)
Trenchless construction and testing of drains and sewers
SIST EN 12889:2023

This document is applicable to the trenchless construction, trenchless replacement techniques and testing of new drains and new sewers in the ground and usually operating as gravity or pressure pipelines, formed using prefabricated pipes and their joints.
Renovation techniques for existing pressure and non-pressure systems are not covered by this document.
Methods of trenchless construction include:
- manned and unmanned techniques;
- steerable and non-steerable techniques.
NOTE 1 Mining or tunnelling techniques for permanent structures (e.g. in situ construction or the use of prefabricated segments) are not covered by this document although some parts can apply to these methods.
NOTE 2 Trenchless insertion using a pipe plough system is a common method for installing small pipes and cables. The method does not exactly cope with the scope of this document. Therefore, it is described in the informative Annex D.
Requirements for associated pipeline installation work other than trenchless construction, e.g. for manholes and inspection chambers, are not covered by this document and are specified in EN 1610. This also applies to pipes that are subsequently installed within entry and exit shafts/pits.

  • Standard
    53 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 476:2022(Main)
General requirements for components used in drains and sewers
SIST EN 476:2022

This document specifies general requirements to be respected in product standards for components such as pipes, fittings, inspection chambers and manholes with their respective joints intended for use in drains and sewers inside and outside buildings which operate as gravity systems allowing for a maximum pressure of 40 kPa.
It also specifies general requirements for components used in hydraulically and pneumatically pressurized pipes, drains and sewers.
NOTE 1   Where the term “inside buildings” is used in the context of components fixed inside buildings, it also includes pipes and fittings fixed on external surfaces of buildings.
NOTE 2   This document is not a product standard and therefore not intended for the direct evaluation of products.
This document covers components to be used in conveying in a satisfactory manner:
—   domestic wastewater;
—   rainwater and surface water;
—   other wastewater acceptable for discharge into the system.
This document is applicable to components of circular and other cross sections.
This document is equally applicable to components which are factory-made and to those constructed on site, where applicable.
NOTE 3   This document does not apply to components used for trenchless construction according to EN 14457 and for components used for renovation of drains and sewers according to EN 13380.
This document does not supersede the functional requirements of a complete system as defined in EN 752.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16933-1:2022(Main)
Drain and sewer systems outside buildings - Design - Part 1: Layout principles
SIST EN 16933-1:2022

This document specifies requirements for the design of drain and sewer systems outside buildings.
It is applicable to drain and sewer systems from the point where the wastewater leaves a building, roof drainage system, or paved area, to a point where it is discharged into a wastewater treatment plant or receiving water body.
This document specifies requirements for the layout of drain and sewer systems.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14654-2:2021(Main)
Drain and sewer systems outside buildings - Management and control of activities - Part 2: Rehabilitation
SIST EN 14654-2:2021

This document establishes requirements for the management and control of activities in drain and sewer systems outside buildings and specifies requirements for development and implementation of work programmes, and the selection of techniques.
This document covers the management and control of rehabilitation activities.
It is applicable to drain and sewer systems from the point where wastewater leaves a building, roof drainage system, or paved area, to the point where it is discharged into a wastewater treatment plant or receiving water body.
Drains and sewers below buildings are included provided that they do not form part of the drainage system of the building.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14654-1:2021(Main)
Drain and sewer systems outside buildings - Management and control of activities - Part 1: General requirements
SIST EN 14654-1:2021

This document establishes requirements for the management and control of activities in drain and sewer systems outside buildings and specifies requirements for development and implementation of work programmes, and the selection of techniques.
This document covers general requirements for the management and control of activities.
It is applicable to drain and sewer systems from the point where wastewater leaves a building, roof drainage system, or paved area, to the point where it is discharged into a wastewater treatment plant or receiving water body.
Drains and sewers below buildings are included provided that they do not form part of the drainage system of the building.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14654-3:2021(Main)
Drain and sewer systems outside buildings - Management and control of activities - Part 3: Drain and sewer cleaning
SIST EN 14654-3:2021

This document establishes requirements for the management and control of activities in drain and sewer systems outside buildings and specifies requirements for development and implementation of work programmes, and the selection of techniques.
This document covers the management and control of drain and sewer cleaning.
It is applicable to drain and sewer systems from the point where wastewater leaves a building, roof drainage system, or paved area, to the point where it is discharged into a wastewater treatment plant or receiving water body.
Drains and sewers below buildings are included provided that they do not form part of the drainage system of the building.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14654-4:2021(Main)
Drain and sewer systems outside buildings - Management and control of activities - Part 4: Control of inputs from users
SIST EN 14654-4:2021

This document establishes requirements for the management and control of activities in drain and sewer systems outside buildings and specifies requirements for development and implementation of work programmes, and the selection of techniques.
This document together with EN 14654-1:2021 covers the control of inputs from users.
It is applicable to drain and sewer systems from the point where wastewater leaves a building, roof drainage system, or paved area, to the point where it is discharged into a wastewater treatment plant or receiving water body.
Drains and sewers below buildings are included provided that they do not form part of the drainage system of the building.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15885:2018(Main)
Classification and characteristics of techniques for renovation, repair and replacement of drains and sewers
SIST EN 15885:2019

This European Standard specifies a system for the classification of trenchless techniques for renovation, repair and replacement on the same line of drains and sewers outside buildings, operated under gravity or pressure, including pipes, connections and manholes. It defines and describes families of techniques and their different generic methods and materials used.
This European Standard does not apply for replacement by open trenching according to EN 1610 and trenchless construction and testing of drains and sewers as new construction off-the-line of the existing drain or sewer according to EN 12889.
This European Standard does not apply for the specification of requirements for specific products.
For each technique family it lists relevant existing standards, materials and applications and outlines characteristics including installation aspects, structural and hydraulic capabilities and site impact.
This standard does not apply to any work required on the existing pipe prior to renovation, repair or replacement.
This European Standard provides information needed to determine viable options and for identification of the optimal technique with regard to a given set of renovation, repair or replacement objectives.
NOTE It is the responsibility of the designer to choose and design the renovation, replacement and repair systems.
It does not specify the calculation methods to determine, for each viable technique, the required amount of material needed to secure the desired performance of the pipeline to be rehabilitated.

  • Standard
    53 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16932-2:2018(Main)
Drain and sewer systems outside buildings - Pumping systems - Part 2: Positive pressure systems
SIST EN 16932-2:2018

This European Standard specifies requirements for design, construction and acceptance testing of wastewater pumping systems in drain and sewer systems outside the buildings they are intended to serve. It includes pumping systems in drain and sewer systems that operate essentially under gravity as well as systems using either positive pressure or partial vacuum.
This document is applicable to positive pressure systems.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day