Aerospace series - Adaptor, Pipe coupling 24° Cone up to 35 000 kPa (5 080 psi) Ring-locked fitting - Reducer - Flareless End - Inch Series - Extra Fine Thread Pitch

This European Standard specifies the dimensions, tolerances, required characteristics and the mass of a reducer, flareless tube end EN 6123, ring locked type, for use in 35 000 kPa (5 080 psi) working pressure systems.

Luft- und Raumfahrt - Adapter, Rohrverschraubung 24° Konus bis 35 000 kPa (5 080 psi) gerade Anschlussverschraubung, reduziertes Rohrende mit Sicherungsring - Inch-Reihe - extra feine Gewindesteigung

Série aérospatiale - Adaptateur, Système de raccordement interface conique 24° jusqu'à 35 000 kPa (5 080 psi) Implantation pour raccord avec bague de sécurité - Réducteur - Série inch - Filetage à pas extra-fin

Aeronavtika - Adapter, Cevni priključek 24° Konica do 35 000 kPa (5080 psi) Navojni priključek z zapornim obročem in njegovim reduktorjem - Brez razširjenega končnika - Palčne mere - Ekstra fin navojni korak

Ta evropski standard določa dimenzije, odstopanja, zahtevane lastnosti in maso reduktorja, brez razširjenega končnika (EN 6123), z navojnim priključkom z zapornim obročem, za uporabo v tlačnih sistemih do 35 000 kPa (5080 psi).

General Information

Status
Withdrawn
Publication Date
29-Nov-2018
Withdrawal Date
27-Feb-2019
Technical Committee
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
01-Aug-2018
Completion Date
01-Aug-2018

Buy Standard

Standard
EN 4836:2018
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 4836:2018
01-oktober-2018
$HURQDYWLND$GDSWHU&HYQLSULNOMXþHNƒ.RQLFDGRN3D SVL
1DYRMQLSULNOMXþHN]]DSRUQLPREURþHPLQQMHJRYLPUHGXNWRUMHP%UH]
UD]ãLUMHQHJDNRQþQLND3DOþQHPHUH(NVWUDILQQDYRMQLNRUDN

Aerospace series - Adaptor, Pipe coupling 24° Cone up to 35 000 kPa (5 080 psi) Ring-

locked fitting - Reducer - Flareless End - Inch Series - Extra Fine Thread Pitch
Luft- und Raumfahrt - Adapter, Rohrverschraubung 24° Konus bis 35 000 kPa (5 080

psi) gerade Anschlussverschraubung, reduziertes Rohrende mit Sicherungsring - Inch

Reihe - extra feine Gewindesteigung

Série aérospatiale - Adapteur, Système de raccordement interface conique 24° jusqu'á

35 000 kPa (5 080 psi) Implantation pour raccord avec bague de sécurité - Séries inch -

Filetage à pas extra-fin
Ta slovenski standard je istoveten z: EN 4836:2018
ICS:
49.080 /HWDOVNLLQYHVROMVNL Aerospace fluid systems and
KLGUDYOLþQLVLVWHPLLQGHOL components
SIST EN 4836:2018 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 4836:2018
---------------------- Page: 2 ----------------------
SIST EN 4836:2018
EN 4836
EUROPEAN STANDARD
NORME EUROPÉENNE
August 2018
EUROPÄISCHE NORM
ICS 49.080
English Version
Aerospace series - Adaptor, Pipe coupling 24° Cone up to
35 000 kPa (5 080 psi) Ring-locked fitting - Reducer -
Flareless End - Inch Series - Extra Fine Thread Pitch

Série aérospatiale - Adapteur, Système de Luft- und Raumfahrt - Adapter, Rohrverschraubung

raccordement interface conique 24° jusqu'á 35 000 kPa 24° Konus bis 35 000 kPa (5 080 psi) gerade

(5 080 psi) Implantation pour raccord avec bague de Anschlussverschraubung, reduziertes Rohrende mit

sécurité - Séries inch - Filetage à pas extra-fin Sicherungsring - Inch-Reihe - extra feine

Gewindesteigung
This European Standard was approved by CEN on 6 December 2017.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this

European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references

concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN

member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by

translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management

Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,

Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,

Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4836:2018 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 4836:2018
EN 4836:2018 (E)
Contents Page

European foreword ...................................................................................................................................................... 3

Introduction .................................................................................................................................................................... 4

1 Scope .................................................................................................................................................................... 5

2 Normative references .................................................................................................................................... 5

3 Requirements ................................................................................................................................................... 6

4 Quality assurance ......................................................................................................................................... 10

5 Designation ..................................................................................................................................................... 10

6 Marking ............................................................................................................................................................ 11

7 Packaging ......................................................................................................................................................... 11

8 Technical Specification ............................................................................................................................... 11

9 REACH ............................................................................................................................................................... 11

Bibliography ................................................................................................................................................................. 12

---------------------- Page: 4 ----------------------
SIST EN 4836:2018
EN 4836:2018 (E)
European foreword

This document (EN 4836:2018) has been prepared by the Aerospace and Defence Industries

Association of Europe - Standardization (ASD-STAN).

After enquiries and votes carried out in accordance with the rules of this Association, this Standard has

received the approval of the National Associations and the Official Services of the member countries of

ASD, prior to its presentation to CEN.

This European Standard shall be given the status of a national standard, either by publication of an

identical text or by endorsement, at the latest by February 2019, and conflicting national standards

shall be withdrawn at the latest by February 2019.

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CEN shall not be held responsible for identifying any or all such patent rights.

According to the CEN-CENELEC Internal Regulations, the national standards organizations of the

following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,

Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,

France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,

Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,

Switzerland, Turkey and the United Kingdom.
---------------------- Page: 5 ----------------------
SIST EN 4836:2018
EN 4836:2018 (E)
Introduction

This European Standard is co-owned standard and a functional equivalent of AS5865. There should be

no technical objection to use AS5865 as replacement of EN 4836 parts. Table 3 shows the equivalent

cross reference of EN 4836 part numbers to AS5865 part numbers. Further revisions to this standard

shall be coordinated with the SAE committee.

European standards use the International System of units (SI); however, large segments of the

aerospace industry make use of other measurement systems as a matter of common working practice.

All dimensions and units used in this standard are given in SI units, with other units also indicated for

the convenience of the user.

The decimal sign used in European standards is the comma (“,”); however, the comma is not used in

common working practice with non-SI dimensions. Therefore, in common with many other aerospace

standards, the decimal point (“.”) is used in this standard when providing dimensions in inch-pound

units.

NOTE The use of non-SI units and the decimal point in this standard does not constitute general acceptance

of measurement systems other than SI within European standards.
---------------------- Page: 6 ----------------------
SIST EN 4836:2018
EN 4836:2018 (E)
1 Scope

This European Standard specifies the dimensions, tolerances, required characteristics and the mass of

a reducer, flareless tube end EN 6123, ring locked type, for use in 35 000 kPa (5 080 psi) working

pressure systems.
2 Normative references

The following documents are referred to in the text in such a way that some or all of their content

constitutes requirements of this document. For dated references, only the edition cited applies. For

undated references, the latest edition of the referenced document (including any amendments)

applies.
EN 2424, Aerospace series — Marking of aerospace products

EN 3311, Aerospace series — Titanium alloy TI-P64001 (Ti-6Al-4V) — Annealed — Bar for machining

D < 110 mm

EN 3314, Aerospace series — Titanium alloy TI-P64001, solution treated and aged; bar for machining

D ≤ 75 mm

EN 4315, Aerospace series — Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15) — Solution treated

and precipitation treated, bar and section a or D ≤ 100 mm, R ≥ 900 MPa

EN 4317, Aerospace series — Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15) — Non heat treated,

forging stock a or D ≤ 200 mm

EN 4832, Aerospace series — Pipe coupling 24°Cone up to 35 000 kPa (5 080 psi) Ring-locked fitting and

Ring-locked fitting-reducer — Inch Series — Technical specification

EN 4835, Aerospace series — Installation and removal requirements for Ring locked fitting and reducer,

24° Cone up to 35 000 kPa (5 080 psi) — Inch Series

EN 6123, Aerospace series — Fitting end, 24° internal cone, external thread, flareless type — Extra fine

thread pitch — Inch series — Design standard

ISO 1302, Geometrical Product Specifications (GPS) — Indication of surface texture in technical product

documentation
ISO 3161, Aerospace — UNJ threads — General requirements and limit dimensions
ISO 4287, Geometrical Product Sp
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.