EN ISO 24034:2005/A1:2008

Welding consumables - Solid wires and rods for fusion welding of titanium and titanium alloys - Classification - Amendment 1 (ISO 24034:2005/Amd 1:2008)

This standard specifies requirements for classification of wire electrodes, wires and rods for arc welding of titanium and titanium alloys. The classification of the wire electrodes, wires and rods is based on their chemical composition.

Schweißzusätze - Massivdrähte und -stäbe zum Schmelzschweißen von Titan und Titanlegierungen - Einteilung - Änderung 1 (ISO 24034:2005/Amd 1:2008)

Produits consommables pour le soudage - Fils pleins et baguettes pleines pour le soudage par fusion du titane et des alliages de titane - Classification - Amendement 1 (ISO 24034:2005/Amd 1:2008)

Dodajni materiali za varjenje - Masivne žice in palice za talilno varjenje titana in titanovih zlitin - Razvrstitev - Dopolnilo 1 (ISO 24034:2005/Amd 1:2008)

General Information

• Status: Withdrawn
• Publication Date: 14-Jun-2008
• Withdrawal Date: 30-Sep-2010
• ICS: 25.160.20 - Welding consumables
• Technical Committee: CEN/TC 121 - Welding
• Drafting Committee: CEN/TC 121/WG 3 - Welding consumables
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 01-Oct-2010
• Completion Date: 01-Oct-2010
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: SIST EN ISO 24034:2006/A1:2008 - Welding consumables - Solid wires and rods for fusion welding of titanium and titanium alloys - Classification - Amendment 1 (ISO 24034:2005/Amd 1:2008)

Relations

• Replaced By: EN ISO 24034:2010 - Welding consumables - Solid wire electrodes, solid wires and rods for fusion welding of titanium and titanium alloys - Classification (ISO/FDIS 24034:2010)
• Effective Date: 09-Oct-2010
• Amends: EN ISO 24034:2005 - Welding consumables - Solid wires and rods for fusion welding of titanium and titanium alloys - Classification (ISO 24034:2005)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 24034:2006/oprA1:2007
01-oktober-2007
Dodajni materiali za varjenje - Masivne žice in palice za talilno varjenje titana in
titanovih zlitin - Razvrstitev (ISO 24034:2005) - Dopolnilo 1 (ISO 24034:2005/DAM
1:2007)
Welding consumables - Solid wires and rods for fusion welding of titanium and titanium
alloys - Classification - Amendment 1 (ISO 24034:2005/DAM 1:2007)
Schweißzusätze - Massivdrähte und -stäbe zum Schmelzschweißen von Titan und
Titanlegierungen - Einteilung - Änderung 1 (ISO 24034:2005/DAM 1:2007)
Produits consommables pour le soudage - Fils pleins et baguettes pleines pour le
soudage par fusion du titane et des alliages de titane - Classification - Amendement 1
(ISO 24034:2005/DAM 1:2007)
Ta slovenski standard je istoveten z: EN ISO 24034:2005/prA1
ICS:
25.160.20 Potrošni material pri varjenju Welding consumables
SIST EN ISO 24034:2006/oprA1:2007 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
DRAFT
EN ISO 24034
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2007
ICS 25.160.20
English Version
Welding consumables - Solid wires and rods for fusion welding
of titanium and titanium alloys - Classification - Amendment 1
(ISO 24034:2005/DAM 1:2007)
Produits consommables pour le soudage - Fils pleins et Schweißzusätze - Massivdrähte und -stäbe zum
baguettes pleines pour le soudage par fusion du titane et Schmelzschweißen von Titan und Titanlegierungen -
des alliages de titane - Classification - Amendement 1 (ISO Einteilung - Änderung 1 (ISO 24034:2005/DAM 1:2007)
24034:2005/DAM 1:2007)
This draft European Standard is submitted to CEN members for parallel enquiry. It has been drawn up by the Technical Committee
CEN/TC 121.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2007 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 24034:2005/prA1:2007: E
worldwide for CEN national Members.

EN ISO 24034:2005/prA1:2007 (E)

Foreword
This document (EN ISO 24034:2005/prA1:2007) has been prepared by Technical Committee
ISO/TC 44 "Welding and allied processes" in collaboration with Technical Committee CEN/TC 121
"Welding", the secretariat of which is held by DIN.

This document is currently submitted to the parallel Enquiry.

Endorsement notice
The text of ISO/DAM 24034:2005 has been approved by CEN as EN ISO 24034:2005/prA1:2007
without any modifications.
DRAFT AMENDMENT ISO 24034:2005/DAmd 1
ISO/TC 44/SC 3 Secretariat: ANSI
Voting begins on: Voting terminates on:
2007-05-10 2007-10-10
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION • МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ • ORGANISATION INTERNATIONALE DE NORMALISATION
Welding consumables — Solid wires and rods for fusion welding
of titanium and titanium alloys — Classification
AMENDMENT 1: Corresponding national classifications
Produits consommables pour le soudage — Fils pleins et baguettes pleines pour le soudage par fusion du
titane et des alliages de titane — Classification
AMENDEMENT 1: Classifications nationales correspondantes
ICS 25.160.20
ISO/CEN PARALLEL ENQUIRY
The CEN Secretary-General has advised the ISO Secretary-General that this ISO/DIS covers a subject
of interest to European standardization. In accordance with the ISO-lead mode of collaboration as
defined in the Vienna Agreement, consultation on this ISO/DIS has the same effect for CEN
members as would a CEN enquiry on a draft European Standard. Should this draft be accepted, a
final draft, established on the basis of comments received, will be submitted to a parallel two-month FDIS
vote in ISO and formal vote in CEN.
To expedite distribution, this document is circulated as received from the committee secretariat.
ISO Central Secretariat work of editing and text composition will be undertaken at publication
stage.
Pour accélérer la distribution, le présent document est distribué tel qu'il est parvenu du
secrétariat du comité. Le travail de rédaction et de composition de texte sera effectué au
Secrétariat central de l'ISO au stade de publication.
THIS DOCUMENT IS A DRAFT CIRCULATED FOR COMMENT AND APPROVAL. IT IS THEREFORE SUBJECT TO CHANGE AND MAY NOT BE
REFERRED TO AS AN INTERNATIONAL STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS BEING ACCEPTABLE FOR INDUSTRIAL, TECHNOLOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT, WITH THEIR COMMENTS, NOTIFICATION OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY A
...

SLOVENSKI STANDARD
01-oktober-2008
Dodajni materiali za varjenje - Masivne žice in palice za talilno varjenje titana in
titanovih zlitin - Razvrstitev - Dopolnilo 1 (ISO 24034:2005/Amd 1:2008)
Welding consumables - Solid wires and rods for fusion welding of titanium and titanium
alloys - Classification - Amendment 1 (ISO 24034:2005/Amd 1:2008)
Schweißzusätze - Massivdrähte und -stäbe zum Schmelzschweißen von Titan und
Titanlegierungen - Einteilung - Änderung 1 (ISO 24034:2005/Amd 1:2008)
Produits consommables pour le soudage - Fils pleins et baguettes pleines pour le
soudage par fusion du titane et des alliages de titane - Classification - Amendement 1
(ISO 24034:2005/Amd 1:2008)
Ta slovenski standard je istoveten z: EN ISO 24034:2005/A1:2008
ICS:
25.160.20 Potrošni material pri varjenju Welding consumables
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 24034:2005/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2008
ICS 25.160.20
English Version
Welding consumables - Solid wires and rods for fusion welding
of titanium and titanium alloys - Classification - Amendment 1
(ISO 24034:2005/Amd 1:2008)
Produits consommables pour le soudage - Fils pleins et Schweißzusätze - Massivdrähte und -stäbe zum
baguettes pleines pour le soudage par fusion du titane et Schmelzschweißen von Titan und Titanlegierungen -
des alliages de titane - Classification - Amendement 1 (ISO Einteilung - Änderung 1 (ISO 24034:2005/Amd 1:2008)
24034:2005/Amd 1:2008)
This amendment A1 modifies the European Standard EN ISO 24034:2005; it was approved by CEN on 14 June 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 24034:2005/A1:2008: E
worldwide for CEN national Members.

Contents Page
Foreword.3

Foreword
This Amendment (EN ISO 24034:2005/A1:2008) has been prepared by Technical Committee ISO/TC 44
"Welding and allied processes" in collaboration with Technical Committee CEN/TC 121 “Welding” the
secretariat of which is held by DIN.
This Amendment to the European Standard EN ISO 24034:2005 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by December 2008, and
conflicting national standards shall be withdrawn at the latest by December 2008.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 24034:2005/Amd 1:2008 has been approved by CEN as a EN ISO 24034:2005/A1:2008
without any modification.
INTERNATIONAL ISO
STANDARD 24034
First edition
2005-10-01
AMENDMENT 1
2008-06-15
Welding consumables — Solid wires and
rods for fusion welding of titanium and
titanium alloys — Classification
AMENDMENT 1
Produits consommables pour le soudage — Fils pleins et baguettes
pleines pour le soudage par fusion du titane et des alliages de titane —
Classification
AMENDEMENT 1
Reference number
ISO 24034:2005/Amd.1:2008(E)
©
ISO 2008
ISO 24034:2005/Amd.1:2008(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Syste
...