EN ISO 22068:2014

Sintered-metal injection-moulded materials - Specifications (ISO 22068:2012)

ISO 22068:2012 specifies the requirements for the chemical composition and the mechanical and physical properties of sintered metal injection-moulded materials.
It is intended to provide design and materials engineers with necessary information for specifying materials in components manufactured by means of the Metal Injection Moulding (MIM) process only.
It does not apply to structural parts manufactured by other powder metallurgy routes, such as press-and-sinter or powder-forging technologies.

Sintermetallpulverspritzguss - Anforderungen (ISO 22068:2012)

Diese Internationale Norm legt Anforderungen an die chemische Zusammensetzung sowie an mechanische und physikalische Eigenschaften von spritzgegossenen pulvermetallurgischen Werkstoffen fest.
Sie dient dem Ziel, Konstrukteure und Werkstofftechniker mit Informationen zu versorgen, die zum Festlegen von Werkstoffen notwendig sind, aus denen Teile ausschließlich durch Metallpulverspritzguss (MIM) herzustellen sind.
Diese Norm darf nicht auf Konstruktionsteile angewendet werden, die nach anderen pulvermetallurgischen Verfahren hergestellt werden, wie z. B. Presssinter  und Pulverschmiedetechniken.

Matériaux métalliques frittés pour moulage par injection - Spécifications (ISO 22068:2012)

L'ISO 22068:2012 spécifie les exigences relatives à la composition chimique et aux propriétés physiques et mécaniques des matériaux métalliques frittés moulés par injection.
Elle a pour but de fournir aux ingénieurs spécialisés dans la conception et les matériaux, les informations nécessaires pour spécifier les matériaux constitutifs de composants fabriqués par le procédé de moulage par injection métallique (MIM) uniquement.
Elle ne s'applique pas aux pièces structurelles fabriquées par d'autres procédés de la métallurgie des poudres, telles que les technologies du forgeage de poudre ou de la compression-frittage.

Sintrani kovinski, brizgano liti materiali - Specifikacije (ISO 22068:2012)

EN ISO 22068 določa zahteve za kemično sestavo ter mehanske in fizične lastnosti sintranih kovinskih, brizgano litih materialov. Njegov namen je inženirjem oblikovanja in materialov zagotoviti potrebne informacije za določanje materialov in sestavnih delov, proizvedenih samo s procesom kovinskega brizganega litja. Ne velja za strukturne dele, proizvedene na druge načine metalurgije prahu, kot je tehnologija sintranja pod pritiskom ali kovanje iz prahu.

General Information

• Status: Published
• Publication Date: 18-Mar-2014
• Withdrawal Date: 29-Sep-2014
• ICS: 77.160 - Powder metallurgy
• Technical Committee: CEN/SS M11 - Powder metallurgy
• Drafting Committee: CEN/SS M11 - Powder metallurgy
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 19-Mar-2014
• Completion Date: 19-Mar-2014
• Ref Project: SIST EN ISO 22068:2014 - Sintered-metal injection-moulded materials - Specifications (ISO 22068:2012)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 22068:2014
01-julij-2014
Sintrani kovinski, brizgano liti materiali - Specifikacije (ISO 22068:2012)
Sintered-metal injection-moulded materials - Specifications (ISO 22068:2012)
Sintermetallpulverspritzguss - Anforderungen (ISO 22068:2012)
Matériaux métalliques frittés pour moulage par injection - Spécifications (ISO
22068:2012)
Ta slovenski standard je istoveten z: EN ISO 22068:2014
ICS:
77.160 Metalurgija prahov Powder metallurgy
SIST EN ISO 22068:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 22068:2014

---------------------- Page: 2 ----------------------

SIST EN ISO 22068:2014

EUROPEAN STANDARD
EN ISO 22068

NORME EUROPÉENNE

EUROPÄISCHE NORM
March 2014
ICS 77.160
English Version
Sintered-metal injection-moulded materials - Specifications (ISO
22068:2012)
Matériaux métalliques frittés pour moulage par injection - Sintermetallpulverspritzguss - Anforderungen (ISO
Spécifications (ISO 22068:2012) 22068:2012)
This European Standard was approved by CEN on 2 March 2014.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 22068:2014 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 22068:2014
EN ISO 22068:2014 (E)
Contents Page
Foreword .3
2

---------------------- Page: 4 ----------------------

SIST EN ISO 22068:2014
EN ISO 22068:2014 (E)
Foreword
The text of ISO 22068:2012 has been prepared by Technical Committee ISO/TC 119 “Powder metallurgy” of
the International Organization for Standardization (ISO) and has been taken over as EN ISO 22068:2014.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by September 2014, and conflicting national standards shall be
withdrawn at the latest by September 2014.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 22068:2012 has been approved by CEN as EN ISO 22068:2014 without any modification.


3

---------------------- Page: 5 ----------------------

SIST EN ISO 22068:2014

---------------------- Page: 6 ----------------------

SIST EN ISO 22068:2014

INTERNATIONAL ISO
STANDARD 22068
First edition
2012-07-01

Sintered-metal injection-moulded
materials — Specifications
Matériaux métalliques frittés pour moulage par injection —
Spécifications




Reference number
ISO 22068:2012(E)
©
ISO 2012

---------------------- Page: 7 ----------------------

SIST EN ISO 22068:2014
ISO 22068:2012(E)

COPYRIGHT PROTECTED DOCUMENT


©  ISO 2012
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced
...