iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 13409:2002

(Main)

Methods of test for hydraulic setting floor smoothing and/or levelling compounds - Determination of setting time

Methods of test for hydraulic setting floor smoothing and/or levelling compounds - Determination of setting time

This European Standard specifies the measurement of setting time of a hydraulic setting smoothing and/or levelling compound which is referred to as "smoothing and/or levelling compound", after mixing.

Prüfverfahren für hydraulisch erhärtende Boden-Spachtelmassen - Bestimmung der Abbindezeit

Die vorliegende Europäische Norm legt die Messung der Abbindezeit einer hydraulisch erhärtenden Boden-Spachtelmasse, die im folgenden als 'Boden-Spachtelmassé bezeichnet wird, nach dem Mischen fest.

Méthodes d'essai pour les mortiers de lissage et/ou d'égalisation à prise hydraulique - Détermination du temps de prise

La présente Norme européenne spécifie le mesurage du temps de prise des mortiers de lissage et/ou d'égalisation à prise hydraulique, ci-après dénommés "mortiers de lissage et/ou d'égalisation", après malaxage.

Preskusne metode za talne izravnalne in/ali livelirne mase za hidravlično nanašanje - Določanje strjevalnega časa

General Information

Status
Published
Publication Date
19-Mar-2002
Withdrawal Date
29-Sep-2002
ICS
91.100.99 - Other construction materials
Technical Committee
CEN/TC 193 - Adhesives
Drafting Committee
CEN/TC 193/WG 4 - Building adhesives
Current Stage
Ref Project
SIST EN 13409:2002 - Methods of test for hydraulic setting floor smoothing and/or levelling compounds - Determination of setting time

Buy Standard

EN 13409:2002EN 13409:2002
PreviousNext
Standard
EN 13409:2002
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.UDYOLþQRPrüfverfahren für hydraulisch erhärtende Boden-Spachtelmassen - Bestimmung der AbbindezeitMéthodes d'essai pour les mortiers de lissage et/ou d'égalisation a prise hydraulique - Détermination du temps de priseMethods of test for hydraulic setting floor smoothing and/or levelling compounds - Determination of setting time91.100.99Drugi gradbeni materialiOther construction materialsICS:Ta slovenski standard je istoveten z:EN 13409:2002SIST EN 13409:2002en01-september-2002SIST EN 13409:2002SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13409March 2002ICS 91.100.99English versionMethods of test for hydraulic setting floor smoothing and/orlevelling compounds - Determination of setting timeMéthodes d'essai pour les mortiers de lissage et/oud'égalisation à prise hydraulique - Détermination du tempsde prisePrüfverfahren für hydraulisch erhärtende Boden-Spachtelmassen - Bestimmung der AbbindezeitThis European Standard was approved by CEN on 30 December 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13409:2002 ESIST EN 13409:2002
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 13872:2004(Main)
Methods of test for hydraulic setting floor smoothing and/or levelling compounds - Determination of dimensional change
SIST EN 13872:2004

This European Standard specifies the measurement of dimensional change of a hydraulic setting smoothing and/or levelling compound which is referred to in the following as "smoothing and/or levelling compound".

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13408:2002(Main)
Methods of test for hydraulic setting floor smoothing and/or levelling compounds - Determination of bond strength
SIST EN 13408:2002

This European Standard specifies a test method for the determination of bond strength between a cured hydraulic setting smoothing and/or levelling com-pound which is referred to as "smoothing and/or levelling compound", and a standard substrate.

  • Standard
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12706:1999(Main)
Adhesives - Test methods for hydraulic setting floor smoothing and/or levelling compounds - Determination of flow characteristics
SIST EN 12706:2000

This European Standard specifies a test method to assess the flow characteristics of a hydraulic setting floor smoothing and/or levelling compounds. Hydraulic setting floor smoothing and/or levelling compounds are referred to as "smoothing and/or levelling compound" when mixed with water and/or mixing liquid according to the manufacturers' instructions.

  • Standard
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1937:1999(Main)
Test method for hydraulic setting floor smoothing and/or levelling compounds - Standard mixing procedures
SIST EN 1937:2000

This European Standard specifies the procedure for mixing hydraulic setting smoothing and/or levelling compounds with water and/or a liquid component as supplied by the manufacturer.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1279-2:2018(Main)
Glass in building - Insulating glass units - Part 2: Long term test method and requirements for moisture penetration
SIST EN 1279-2:2018

This document describes the test method for the determination of moisture penetration index and specifies the requirements for limit values for insulating glass units made
a)   in accordance with EN 1279 1:2018 and manufactured to EN 1279 6:2018; or
b)   for the purpose to demonstrate that components (e.g. edge seals or spacers) will allow the insulating glass unit to conform to the requirements given in EN 1279 1:2018, Clause 6.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16566:2014(Main)
Paints and varnishes - Fillers for internal and/or external works - Adaptation of fillers to European standards
SIST EN 16566:2014

This European Standard defines coating materials designed to cover all backgrounds and substrates in traditional materials or compliant with the standards in force, whether new or existing, bare or coated, absorbent or non-absorbent, smooth or rough, in order to prepare them to receive a paint or related system, or a bonded cover, whether specific or not. More generally intended to improve the surface appearance, they can also:
-   not be over-coated;
-   create a textured appearance or not;
-   be treated/coloured or not (pigments, wax, etc.).
Exterior fillers are not intended as top coat.
Interior coating materials with grain size over 1 mm are not covered by this European Standard.
Fillers specifically intended for wooden and metal substrates are not covered by this European Standard.
This European Standard complies with the general system for classification of water-borne coating materials and coating systems for interior walls and ceilings described in EN 13300.
This European Standard complies with the general system for the description of coating materials and coating systems for exterior masonry and concrete described in EN 1062 1.
The essential function of fillers is therefore a decorative function. Therefore, these fillers are considered here as preparatory and/or decorative fillers, of smooth or textured appearance.
NOTE   Nothing prevents preparatory surface filler from being coated with a paint system comprising protective functions.
However, they are not suitable for truing of backgrounds, without specifications regarding the verticality, angularity or flatness under a 2-m straight edge, or thickness. Their application never requires, to ensure they bond correctly, the prior application of a rigid reinforcement such as a lathwork or wire mesh, or a spatter-dash or bagging or scoring of the surface between two coats. They may nevertheless incorporate a flexible reinforcement (strip of natural or synthetic fabric) for example along joints between different or same materials, in order to limit visible cracking.
Under these conditions, this European Standard does not concern products covered by the following standards: EN 998 1, EN 998 2, EN 15824, EN 13279 1, EN 13963, EN 12860, EN 13813, EN ISO 11600.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12089:2013(Main)
Thermal insulating products for building applications - Determination of bending behaviour
SIST EN 12089:2013

This European Standard specifies the equipment and procedures for determining the bending behaviour of full size products (Method A) and test specimens (Method B) under the action of three-point loading. It is applicable to thermal insulating products.
The test is designed to determine the bending strength of products and their deflection at a given load.
The method can be used to determine the resistance of the product to bending stresses during transport and application.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    11 pages
    German language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12086:2013(Main)
Thermal insulating products for building applications - Determination of water vapour transmission properties
SIST EN 12086:2013

This European Standard specifies the equipment and procedures for determining the water vapour transmission rate, water vapour permeance and water vapour permeability of test specimens in the steady state under different sets of specified test conditions. It is applicable to thermal insulating products.
It is intended to be used for homogeneous materials and for products which may contain integral skins or facings of different material(s).
A material is considered to be homogeneous, with regard to mass distribution, if its density is approximately the same throughout, i.e. if the measured density values are close to its mean density.
This test method is not normally used for determining the water vapour transmission properties of single, separate vapour barriers (of high diffusion resistance), such as prefabricated films, foils, membranes or sheets, due to the long duration of the test. For products with a vapour retarder or barrier with a water vapour diffusion equivalent air layer thickness sd  1 000 m (see 3.6) other test methods e.g. IR-detection can be used for measuring the single separate vapour retarder or barrier, provided that the results obtained are in the same range as the values measured in accordance with this standard.
The water vapour transmission rate and permeance values are specific to the test specimen (i.e. the product) thickness tested. For homogeneous products, the water vapour permeability is a property of the material.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12090:2013(Main)
Thermal insulating products for building applications - Determination of shear behaviour
SIST EN 12090:2013

This European Standard specifies the equipment and procedures for determining shear behaviour. It is applicable to thermal insulating products.
NOTE   The tests described in this standard do not determine pure shear behaviour, but measure the effects of applying two opposite parallel forces to the major faces of the test specimen. The test is however called shear in this text by convention. The application of a force tangentially to the major surface of the test specimen is considered to represent more closely the stresses imposed upon thermal insulation products in many building applications, particularly walls, than other methods of measuring shear performance e.g. bending tests.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12430:2013(Main)
Thermal insulating products for building applications - Determination of behaviour under point load
SIST EN 12430:2013

This European Standard specifies equipment and procedures for determining the behaviour of products under a force applied to a small area of a test specimen at a given speed. It is applicable to thermal insulating products.
This European Standard can be used to determine whether the products have sufficient strength to withstand forces applied directly to them either during installation or during application, mainly caused by pedestrian traffic.
NOTE   The test methods given in the main body of the standard and in Annex A are reported and interpreted in different ways. The similarities that exist between the methods are not sufficient to permit reasonable comparisons to be made.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day