Geometrical product specifications (GPS) - Cylindricity - Part 2: Specification operators (ISO 12180-2:2011)

ISO 12180-2:2011 specifies the complete specification operator for cylindricity of complete integral features only, i.e. geometrical characteristics of features of type cylinder

Geometrische Produktspezifikation (GPS) - Zylindrizität - Teil 2: Spezifikationsoperatoren (ISO 12180-2:2011)

Dieser Teil von ISO 12180 legt den vollständigen Spezifikationsoperator für Zylindrizität, d. h. geometrische
Merkmale von Geometrieelementen von der Gestalt eines Zylinders, fest.

Spécification géométrique des produits (GPS) - Cylindricité - Partie 2: Opérateurs de spécification (ISO 12180-2:2011)

L'ISO 12180-2:2011 spécifie l'opérateur de spécification complet pour la cylindricité des éléments intégraux complets uniquement, c'est-à-dire pour les caractéristiques géométriques des éléments de type cylindre.

Specifikacija geometrijskih veličin izdelka - Cilindričnost - 2. del: Parametri za specifikacijo (ISO 12180-2:2011)

Ta del ISO 12180 določa celotne parametre za specifikacijo cilindričnosti samo vgrajenih funkcij, tj. geometrijske značilnosti funkcij tipskega cilindra.

General Information

Status
Published
Publication Date
31-Mar-2011
Withdrawal Date
30-Oct-2011
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
01-Apr-2011
Completion Date
01-Apr-2011

Relations

Buy Standard

Standard
EN ISO 12180-2:2011
English language
20 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 12180-2:2009
English language
21 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Geometrische Produktspezifikation (GPS) - Zylindrizität - Teil 2: Spezifikationsoperatoren (ISO 12180-2:2011)Spécification géométrique des produits (GPS) - Cylindricité - Partie 2: Opérateurs de spécification (ISO 12180-2:2011)Geometrical product specifications (GPS) - Cylindricity - Part 2: Specification operators (ISO 12180-2:2011)17.040.20Lastnosti površinProperties of surfacesICS:Ta slovenski standard je istoveten z:EN ISO 12180-2:2011SIST EN ISO 12180-2:2011en,fr,de01-november-2011SIST EN ISO 12180-2:2011SLOVENSKI
STANDARDSIST-TS CEN ISO/TS 12180-2:20081DGRPHãþD



SIST EN ISO 12180-2:2011



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN ISO 12180-2
April 2011 ICS 17.040.20 Supersedes CEN ISO/TS 12180-2:2007English Version
Geometrical product specifications (GPS) - Cylindricity - Part 2: Specification operators (ISO 12180-2:2011)
Spécification géométrique des produits (GPS) - Cylindricité - Partie 2: Opérateurs de spécification (ISO 12180-2:2011) Geometrische Produktspezifikation (GPS) - Zylindrizität - Teil 2: Spezifikationsoperatoren (ISO 12180-2:2011) This European Standard was approved by CEN on 26 February 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 12180-2:2011: ESIST EN ISO 12180-2:2011



EN ISO 12180-2:2011 (E) 2 Contents Page Foreword .3 SIST EN ISO 12180-2:2011



EN ISO 12180-2:2011 (E) 3 Foreword This document (EN ISO 12180-2:2011) has been prepared by Technical Committee ISO/TC 213 "Dimensional and geometrical product specifications and verification" in collaboration with Technical Committee CEN/TC 290 “Dimensional and geometrical product specification and verification” the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2011, and conflicting national standards shall be withdrawn at the latest by October 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes CEN ISO/TS 12180-2:2007. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 12180-2:2011 has been approved by CEN as a EN ISO 12180-2:2011 without any modification.
SIST EN ISO 12180-2:2011



SIST EN ISO 12180-2:2011



Reference numberISO 12180-2:2011(E)© ISO 2011
INTERNATIONAL STANDARD ISO12180-2First edition2011-04-01Geometrical product specifications (GPS) — Cylindricity — Part 2: Specification operators Spécification géométrique des produits (GPS) — Cylindricité — Partie 2: Opérateurs de spécification
SIST EN ISO 12180-2:2011



ISO 12180-2:2011(E)
COPYRIGHT PROTECTED DOCUMENT
©
ISO 2011 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address be
...

SLOVENSKI STANDARD
oSIST prEN ISO 12180-2:2009
01-julij-2009
6SHFLILNDFLMDJHRPHWULMVNLKYHOLþLQL]GHOND&LOLQGULþQRVWGHO3DUDPHWUL]D
VSHFLILNDFLMR ,62',6
Geometrical product specifications (GPS) - Cylindricity - Part 2: Specification operators
(ISO/DIS 12180-2:2009)
Geometrische Produktspezifikation (GPS) - Zylindrizität - Teil 2: Spezifikationsoperatoren
(ISO/DIS 12180-2:2009)
Spécification géométrique des produits (GPS) - Cylindricité - Partie 2: Opérateurs de
spécification (ISO/DIS 12180-2:2009)
Ta slovenski standard je istoveten z: prEN ISO 12180-2
ICS:
17.040.20 Lastnosti površin Properties of surfaces
oSIST prEN ISO 12180-2:2009 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 12180-2:2009

---------------------- Page: 2 ----------------------
oSIST prEN ISO 12180-2:2009
EUROPEAN STANDARD
DRAFT
prEN ISO 12180-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2009
ICS 17.040.20 Will supersede CEN ISO/TS 12180-2:2007
English Version
Geometrical product specifications (GPS) - Cylindricity - Part 2:
Specification operators (ISO/DIS 12180-2:2009)
Spécification géométrique des produits (GPS) - Cylindricité Geometrische Produktspezifikation (GPS) - Zylindrizität -
- Partie 2: Opérateurs de spécification (ISO/DIS 12180- Teil 2: Spezifikationsoperatoren (ISO/DIS 12180-2:2009)
2:2009)
This draft European Standard is submitted to CEN members for parallel enquiry. It has been drawn up by the Technical Committee
CEN/TC 290.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN ISO 12180-2:2009: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN ISO 12180-2:2009
prEN ISO 12180-2:2009 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------
oSIST prEN ISO 12180-2:2009
prEN ISO 12180-2:2009 (E)
Foreword
This document (prEN ISO 12180-2:2009) has been prepared by Technical Committee ISO/TC 213
"Dimensional and geometrical product specifications and verification" in collaboration with Technical
Committee CEN/TC 290 “Dimensional and geometrical product specification and verification”, the secretariat
of which is held by AFNOR.
This document is currently submitted to the parallel Enquiry.
This document will supersede CEN ISO/TS 12180-2:2007.
Endorsement notice
The text of ISO/DIS 12180-2:2009 has been approved by CEN as a prEN ISO 12180-2:2009 without any
modification.

3

---------------------- Page: 5 ----------------------
oSIST prEN ISO 12180-2:2009

---------------------- Page: 6 ----------------------
oSIST prEN ISO 12180-2:2009
DRAFT INTERNATIONAL STANDARD ISO/DIS 12180-2
ISO/TC 213 Secretariat: DS
Voting begins on: Voting terminates on:
2009-05-14 2009-10-14
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION • МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ • ORGANISATION INTERNATIONALE DE NORMALISATION
Geometrical product specifications (GPS) — Cylindricity —
Part 2:
Specification operators
Spécification géométrique des produits (GPS) — Cylindricité —
Partie 2: Opérateurs de spécification
(Revision of ISO/TS 12180-2:2003)
ICS 17.040.20

ISO/CEN PARALLEL PROCESSING
This draft has been developed within the International Organiza
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.