EN ISO 16610-28:2016
(Main)Geometrical product specifications (GPS) - Filtration - Part 28: Profile filters: End effects (ISO 16610-28:2016)
Geometrical product specifications (GPS) - Filtration - Part 28: Profile filters: End effects (ISO 16610-28:2016)
ISO 16610-28:2016 provides methods for treating the end effects of linear profile filters where such effects occur.
Geometrische Produktspezifikation (GPS) - Filterung - Teil 28: Profilfilter: Endeffekte (ISO 16610-28:2016)
Dieses Dokument enthält Verfahren zur Behandlung von Endeffekten bei linearen Profilfiltern im Fall ihres Auftretens.
Spécification géométrique des produits (GPS) - Filtrage - Partie 28: Filtres de profil: Effets de bords (ISO 16610-28:2016)
ISO 16610-28:2016 fournit des méthodes pour traiter les effets de bord des filtres de profil linéaire, lorsque ces effets se produisent.
Specifikacije geometrijskih veličin izdelka (GPS) - Filtriranje - 28. del: Profilni filtri: končni učinki (ISO 16610-28:2016)
Ta del standarda ISO 16610 podaja metode za popravljanje končnih učinkov linearnih profilnih filtrov, kjer se pojavljajo taki učinki.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 16610-28:2017
01-marec-2017
6SHFLILNDFLMHJHRPHWULMVNLKYHOLþLQL]GHOND *36 )LOWULUDQMHGHO 3URILOQLILOWUL
NRQþQLXþLQNL ,62
Geometrical product specifications (GPS) - Filtration - Part 28: Profile filters: End effects
(ISO 16610-28:2016)
Geometrische Produktspezifikation (GPS) - Filterung - Teil 28: Profilfilter: Endeffekte
(ISO 16610-28:2016)
Spécification géométrique des produits (GPS) - Filtrage - Partie 28: Filtres de profil:
Effets de bords (ISO 16610-28:2016)
Ta slovenski standard je istoveten z: EN ISO 16610-28:2016
ICS:
17.040.20 Lastnosti površin Properties of surfaces
17.040.40 6SHFLILNDFLMDJHRPHWULMVNLK Geometrical Product
YHOLþLQL]GHOND *36 Specification (GPS)
SIST EN ISO 16610-28:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 16610-28:2017
---------------------- Page: 2 ----------------------
SIST EN ISO 16610-28:2017
EN ISO 16610-28
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2016
EUROPÄISCHE NORM
ICS 17.040.40
English Version
Geometrical product specifications (GPS) - Filtration - Part
28: Profile filters: End effects (ISO 16610-28:2016)
Spécification géométrique des produits (GPS) - Filtrage Geometrische Produktspezifikation (GPS) - Filterung -
- Partie 28: Filtres de profil: Effets de bords (ISO Teil 28: Profilfilter: Endeffekte (ISO 16610-28:2016)
16610-28:2016)
This European Standard was approved by CEN on 19 November 2016.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 16610-28:2016 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 16610-28:2017
EN ISO 16610-28:2016 (E)
Contents Page
European Foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 16610-28:2017
EN ISO 16610-28:2016 (E)
European Foreword
This document (EN ISO 16610-28:2016) has been prepared by Technical Committee ISO/TC 213
“Dimensional and geometrical product specifications and verification” in collaboration with Technical
Committee CEN/TC 290 “Dimensional and geometrical product specification and verification” the
secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2017, and conflicting national standards shall be
withdrawn at the latest by June 2017.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands,
Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 16610-28:2016 has been approved by CEN as EN ISO 16610-28:2016 without any
modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 16610-28:2017
------
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.