EN 13872:2004
(Main)Methods of test for hydraulic setting floor smoothing and/or levelling compounds - Determination of dimensional change
Methods of test for hydraulic setting floor smoothing and/or levelling compounds - Determination of dimensional change
This European Standard specifies the measurement of dimensional change of a hydraulic setting smoothing and/or levelling compound which is referred to in the following as "smoothing and/or levelling compound".
Prüfverfahren für hydraulisch erhärtende Boden-Spachtelmassen - Bestimmung der Maßänderung
Diese Europäische Norm legt ein Verfahren zur Bestimmung der Maßänderung von hydraulisch erhärtenden Boden-Spachtelmassen fest, die im folgenden "Boden-Spachtelmassen" genannt werden.
Méthode d'essai pour les mortiers de lissage et/ou d'égalisation à prise hydraulique - Détermination des variations des dimensions
La présente Norme européenne spécifie le mesurage des variations dimensionnelles d'un mortier de lissage et/ou d'égalisation à prise hydraulique, désigné ci-après par « mortier de lissage et/ou d'égalisation.
Metode za preskušanje talnih izravnalnih in/ali livelirnih mas za hidravlično nanašanje – Ugotavljanje krčenja
General Information
- Status
- Published
- Publication Date
- 10-Feb-2004
- Withdrawal Date
- 30-Aug-2004
- Technical Committee
- CEN/TC 193 - Adhesives
- Drafting Committee
- CEN/TC 193/WG 4 - Building adhesives
- Current Stage
- 9092 - Decision on results of review/2YR ENQ - revise - Review Enquiry
- Start Date
- 06-May-2024
- Completion Date
- 14-Apr-2025
- Directive
- 89/106/EEC - Construction products
Overview
EN 13872:2004 is a CEN test method for measuring the dimensional change (shrinkage or expansion) of hydraulic setting floor smoothing and levelling compounds. The standard defines specimen geometry, measuring apparatus, test atmosphere and storage times to quantify length change of cast specimens and to report results as percent change. It is intended for manufacturers, testing laboratories, specifiers and quality-control personnel in the floor covering and construction-materials sectors.
Key topics & technical requirements
- Scope: Measurement of dimensional change of hydraulic setting smoothing and/or levelling compounds.
- Specimen size: Test specimens cast from moulds of nominal dimensions 10 ± 0.5 mm × 40 ± 0.5 mm × 160 ± 1.0 mm (three specimens minimum).
- Measuring accuracy: Appparatus capable of ±0.005 mm resolution; examples shown for vertical and horizontal measuring set-ups and for various measuring peg shapes (A–D).
- Standard atmosphere: Conditioning and testing at (23 ± 2) °C and (50 ± 5) % RH in accordance with ISO 554.
- Storage & measurement schedule: Initial measurement after demoulding (1 day), then at 3, 7, 14 and 28 days (storage A). Optional additional 28 days water immersion after the 28‑day dry storage with wet measurements (storage B).
- Result expression: Dimensional change reported as shrinkage (negative) or expansion (positive) in percent relative to the reference length (immediately after demoulding for storage A; immediately prior to immersion for storage B). Results are the arithmetic mean of three specimens, rounded to 0.01 %.
- Test report content: Must include reference to EN 13872, compound designation and batch, mixing method and time (per EN 1937), dimensional change values, any curling/twisting, influencing factors and test date.
Practical applications
- Verify product performance and dimensional stability of floor smoothing and levelling compounds used under floor coverings.
- Support quality control during production and batch verification.
- Provide objective data for product datasheets, technical approvals and comparison between formulations.
- Aid specifiers, flooring contractors and certification bodies in assessing risk of curl, shrinkage or expansion that could affect finishing layers.
Who uses this standard
- Manufacturers of hydraulic setting smoothing/levelling compounds
- Materials testing laboratories and QA departments
- Flooring product specifiers, consultants and certification bodies
- R&D teams optimizing formulation and dimensional stability
Related standards
- EN 1937:1999 - Test method for hydraulic setting floor smoothing and/or levelling compounds (mixing procedures)
- EN 196-1 - Methods of testing cement - Part 1: Determination of strength (relevant apparatus and mould practice)
- ISO 554 - Standard atmospheres for conditioning and/or testing
Keywords: EN 13872:2004, dimensional change, shrinkage, floor smoothing compound testing, levelling compounds, hydraulic setting, CEN test method, construction materials testing.
Frequently Asked Questions
EN 13872:2004 is a standard published by the European Committee for Standardization (CEN). Its full title is "Methods of test for hydraulic setting floor smoothing and/or levelling compounds - Determination of dimensional change". This standard covers: This European Standard specifies the measurement of dimensional change of a hydraulic setting smoothing and/or levelling compound which is referred to in the following as "smoothing and/or levelling compound".
This European Standard specifies the measurement of dimensional change of a hydraulic setting smoothing and/or levelling compound which is referred to in the following as "smoothing and/or levelling compound".
EN 13872:2004 is classified under the following ICS (International Classification for Standards) categories: 91.100.99 - Other construction materials. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 13872:2004 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase EN 13872:2004 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CEN standards.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Prüfverfahren für hydraulisch erhärtende Boden-Spachtelmassen - Bestimmung der MaßänderungMéthode d'essai pour les mortiers de lissage et/ou d'égalisation a prise hydraulique - Détermination des variations des dimensionsMethods of test for hydraulic setting floor smoothing and/or levelling compounds - Determination of dimensional change91.100.99Drugi gradbeni materialiOther construction materialsICS:Ta slovenski standard je istoveten z:EN 13872:2004SIST EN 13872:2004en,fr,de01-oktober-2004SIST EN 13872:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13872February 2004ICS 91.100.99English versionMethod of test for smoothing and/or levelling compounds -Determination of shrinkageMéthode d'essai pour les mortiers de lissage et/oud'égalisation - Détermination du retraitPrüfverfahren für Boden-Spachtelmassen - Bestimmungder SchrumpfungThis European Standard was approved by CEN on 10 December 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13872:2004: ESIST EN 13872:2004
...
The EN 13872:2004 is a critical European Standard that outlines methodologies for testing the dimensional change of hydraulic setting floor smoothing and/or levelling compounds. The standard's scope is precisely defined, focusing specifically on the measurement of dimensional changes in these compounds, which is vital for ensuring their performance and durability in flooring applications. One of the strengths of EN 13872:2004 is its clear methodology for testing, which allows manufacturers and contractors to evaluate the dimensional stability of their products. This consistency in testing ensures that all smoothing and/or levelling compounds are measured under the same criteria, promoting reliability and quality control. As a result, users can have greater confidence in the performance of these compounds over time, particularly in applications where stability is critical. Additionally, the relevance of this standard cannot be overstated, especially in the context of the construction and building materials sector. With the growing demand for high-performance flooring solutions, understanding the behavior of hydraulic setting smoothing and/or levelling compounds under various conditions is essential. EN 13872:2004 addresses this need by providing a comprehensive framework that aligns with modern industry practices and expectations. Overall, EN 13872:2004 stands out as an essential document that supports quality assurance in the production and use of hydraulic setting floor smoothing and/or levelling compounds. Its specific focus on dimensional change measurement is invaluable for manufacturers aiming to deliver reliable products, ultimately contributing to the longevity and stability of flooring installations across various environments.
SIST EN 13872:2004 표준은 수압 세팅 마감 및/또는 평탄화 화합물의 치수 변화를 측정하는 방법에 대한 유럽 표준으로, 특히 건축 및 건설 산업에서 중요한 역할을 합니다. 이 표준의 범위는 수압 세팅 마감 및 평탄화 화합물의 물질적 특성을 평가하는 데 중점을 두며, 이러한 화합물이 다양한 환경에서 어떻게 반응하는지를 명확히 규명합니다. EN 13872:2004 표준의 강점은 그 정확성과 신뢰성에 있습니다. 표준화된 테스트 방법을 통해 사용자는 화합물의 치수 변화를 정량적으로 평가할 수 있으며, 이는 품질 관리 및 제품 개발 과정에서 필수적인 요소입니다. 또한, 이 표준은 사용자가 시험 조건을 일관되게 유지할 수 있도록 명확한 절차를 제공합니다. 이 표준은 건축 제품의 성능을 보장하기 위해 매우 중요한 기준이 됩니다. 치수 변화는 건축물의 내구성과 안전성에 직접적인 영향을 미치므로, EN 13872:2004는 제작자뿐만 아니라 건축 전문가들에게도 활용될 수 있는 귀중한 도구입니다. 따라서 이 표준은 수압 세팅 마감 및 평탄화 화합물의 품질 평가와 신뢰성을 보장하는 데 필수적입니다.
EN 13872:2004は、流体設定の床スムージングおよびレベリング化合物に関する試験方法を定めたヨーロッパの標準です。この標準の範囲は、スムージングおよびレベリング化合物に関連する寸法変化の測定を明確に規定しています。 この標準の強みは、実際の施工現場での材料性能を評価するための信頼性の高い方法を提供する点です。測定方法は明確に定義されており、エンジニアや施工業者が一貫して同じ基準で試験を行うことを可能にします。これにより、製品の品質管理が向上し、ユーザーにとっての製品選定が容易になります。 さらに、EN 13872:2004は、スムージングおよびレベリング化合物の性能評価における国際的な基準としての重要性を示しています。この標準は、多くの国際的な施工基準とも整合性を持ち、グローバルな市場へ進出する企業にとって非常に価値のある指針となります。 全体として、この標準は、スムージングおよびレベリング化合物の寸法変化の測定に関する明確で実用的なアプローチを提供し、業界内での信頼性を確保するための重要なツールとなっています。
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...