prEN 13630-1

Explosives for civil uses - Detonating cords and safety fuses - Part 1: Requirements

This document specifies the requirements for detonating cords and safety fuses for civil uses, when subjected to the test methods defined in the standards referred to in Clause 2.

Explosivstoffe für zivile Zwecke - Sprengschnüre und Sicherheitsanzündschnüre - Teil 1: Anforderungen

Dieses Dokument legt die Anforderungen an Sprengschnüre und Sicherheitsanzündschnüre für zivile Zwecke fest, wenn diese den Prüfverfahren unterzogen werden, die in den in Abschnitt 2 aufgeführten Normen festgelegt sind.

Explosifs à usage civil - Cordeaux détonants et mèches de sûreté - Partie 1 : Exigences

Le présent document spécifie les exigences à appliquer aux cordeaux détonants et mèches de sûreté destinés à l'usage civil lorsqu'ils sont soumis aux méthodes d'essai définies dans les normes mentionnées à l'Article 2.

Eksplozivi za civilno uporabo – Detonacijske in počasi goreče vžigalne vrvice – 1. del: Zahteve

General Information

• Status: Not Published
• Publication Date: 29-May-2023
• ICS: 71.100.30 - Explosives. Pyrotechnics and fireworks
• Technical Committee: CEN/TC 321 - Explosives for civil uses
• Drafting Committee: CEN/TC 321/WG 6 - Explosives and propellants
• Current Stage: 4599 - Dispatch of FV draft to CMC - Finalization for Vote
• Start Date: 07-Sep-2023
• Due Date: 23-Jul-2021
• Completion Date: 07-Sep-2023
• Directive: 2014/28/EU - Directive 2014/28/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market and supervision of explosives for civil uses
• Mandate: M/055 - Standardization mandate to CEN for explosives for civil uses
• Mandate: M/562 - Standardization Request on Explosives for civil use
• Ref Project: oSIST prEN 13630-1:2021 - Explosives for civil uses - Detonating cords and safety fuses - Part 1: Requirements

Relations

• Revises: EN 13630-1:2003 - Explosives for civil uses - Detonating cords and safety fuses - Part 1: Requirements
• Effective Date: 18-Jan-2023
• Revises: EN 13857-3:2002 - Explosives for civil uses - Part 3: Information to be provided by the manufacturer or his authorised representative to the user
• Effective Date: 18-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 13630-1:2021
01-april-2021
Eksplozivi za civilno uporabo – Detonacijske in počasi goreče vžigalne vrvice – 1.
del: Zahteve
Explosives for civil uses - Detonating cords and safety fuses - Part 1: Requirements
Explosivstoffe für zivile Zwecke - Sprengschnüre und Sicherheitsanzündschnüre - Teil 1:
Anforderungen
Explosifs à usage civil - Cordeaux détonants et mèches de sûreté - Partie 1: Exigences
Ta slovenski standard je istoveten z: prEN 13630-1
ICS:
71.100.30 Eksplozivi. Pirotehnika in Explosives. Pyrotechnics and
ognjemeti fireworks
oSIST prEN 13630-1:2021 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 13630-1:2021

---------------------- Page: 2 ----------------------
oSIST prEN 13630-1:2021


DRAFT
EUROPEAN STANDARD
prEN 13630-1
NORME EUROPÉENNE

EUROPÄISCHE NORM

April 2021
ICS 71.100.30 Will supersede EN 13630-1:2003
English Version

Explosives for civil uses - Detonating cords and safety
fuses - Part 1: Requirements
Explosifs à usage civil - Cordeaux détonants et mèches Explosivstoffe für zivile Zwecke - Sprengschnüre und
de sûreté - Partie 1 : Exigences Sicherheitsanzündschnüre - Teil 1: Anforderungen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 321.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 13630-1:2021 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 13630-1:2021
prEN 13630-1:2021 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Requirements for detonating cords . 5
4.1 Thermal stability . 5
4.2 Sensitiveness to friction of the core of detonating cords . 5
4.3 Sensitiveness to impact of detonating cords. 5
4.4 Resistance to abrasion . 5
4.5 Resistance to tension of detonating cords . 5
4.6 Reliability of initiation . 5
4.7 Resistance to water . 5
4.
...