EN ISO 1927-6:2012

Monolithic (unshaped) refractory products - Part 6: Measurement of physical properties (ISO 1927-6:2012)

ISO 1927-6:2012 specifies methods for the determination of properties of unshaped materials from test pieces prepared and stored according to ISO 1927-5:2012.
The methods are applicable to dense and insulating castables and to ramming materials (including plastics) as defined in ISO 1927-1:2012 before and after firing.

Ungeformte (monolithische) feuerfeste Erzeugnisse - Teil 6: Bestimmung der physikalischen Eigenschaften (ISO 1927-6:2012)

Dieser Teil der ISO 1927 legt Verfahren zur Bestimmung der Eigenschaften ungeformter Werkstoffe an Probekörpern, die nach ISO 1927-5 hergestellt und gelagert werden, fest.
Die Verfahren gelten für dichte und wärmedämmende Feuerbetone und Rammmassen (einschließlich plastischer Massen), wie in ISO 1927-1 definiert, im ungebrannten und gebrannten Zustand.

Produits réfractaires monolithiques (non façonnés) - Partie 6: Détermination des propriétés physiques (ISO 1927-6:2012)

L'ISO 1927-6:2012 spécifie des méthodes pour la détermination des propriétés de matériaux réfractaires monolithiques (non façonnés) à partir d'éprouvettes préparées et conservées conformément à l'ISO 1927-5.
Les méthodes sont applicables aux bétons denses et isolants et aux matériaux moulables (y compris les mélanges plastiques) tels que définis dans l'ISO 1927-1, avant et après cuisson.

Neoblikovani ognjevzdržni izdelki - 6. del: Merjenje fizikalnih lastnosti (ISO 1927-6:2012)

Ta del standarda ISO 1927 določa metode za ugotavljanje lastnosti neoblikovanih materialov iz vzorcev, pripravljenih in skladiščenih v skladu s standardom ISO 1927-5. Te metode se uporabljajo za zgoščene in izolacijske betone ter za mašilne materiale (vključno s plastiko), kot je opredeljeno v standardu ISO 1927-1, pred žganjem in po njem.

General Information

• Status: Published
• Publication Date: 30-Nov-2012
• Withdrawal Date: 29-Jun-2013
• ICS: 81.080 - Refractories
• Technical Committee: CEN/TC 187 - Refractory products and materials
• Drafting Committee: CEN/TC 187/WG 2 - Unshaped refractory materials
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 01-Dec-2012
• Completion Date: 01-Dec-2012
• Ref Project: SIST EN ISO 1927-6:2013 - Unshaped refractory materials - Part 6: Measurement of physical properties (ISO 1927-6:2012)

Relations

• Replaces: EN 1402-6:2003 - Unshaped refractory products - Part 6: Measurement of physical properties
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 1927-6:2013
01-maj-2013
1DGRPHãþD
SIST EN 1402-6:2004
Neoblikovani ognjevzdržni izdelki - 6. del: Merjenje fizikalnih lastnosti (ISO 1927-
6:2012)
Unshaped refractory materials - Part 6: Measurement of physical properties (ISO 1927-
6:2012)
Ungeformte feuerfeste Erzeugnisse - Teil 6: Bestimmung der physikalischen
Eigenschaften (ISO 1927-6:2012)
Produits réfractaires non façonnés - Partie 6: Détermination des propriétés physiques
(ISO 1927-6:2012)
Ta slovenski standard je istoveten z: EN ISO 1927-6:2012
ICS:
81.080 Ognjevzdržni materiali Refractories
SIST EN ISO 1927-6:2013 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 1927-6:2013

---------------------- Page: 2 ----------------------

SIST EN ISO 1927-6:2013


EUROPEAN STANDARD
EN ISO 1927-6

NORME EUROPÉENNE

EUROPÄISCHE NORM
December 2012
ICS 81.080 Supersedes EN 1402-6:2003
English Version
Monolithic (unshaped) refractory products - Part 6:
Measurement of physical properties (ISO 1927-6:2012)
Produits réfractaires monolithiques (non façonnés) - Partie Ungeformte (monolithische) feuerfeste Erzeugnisse - Teil 6:
6: Détermination des propriétés physiques (ISO 1927- Bestimmung der physikalischen Eigenschaften (ISO 1927-
6:2012) 6:2012)
This European Standard was approved by CEN on 30 November 2012.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 1927-6:2012: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 1927-6:2013
EN ISO 1927-6:2012 (E)
Contents Page
Foreword . 3
2

---------------------- Page: 4 ----------------------

SIST EN ISO 1927-6:2013
EN ISO 1927-6:2012 (E)
Foreword
This document (EN ISO 1927-6:2012) has been prepared by Technical Committee ISO/TC 33 "Refractories"
in collaboration with Technical Committee CEN/TC 187 “Refractory products and materials” the secretariat of
which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by June 2013, and conflicting national standards shall be withdrawn at
the latest by June 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 1402-6:2003.
According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 1927-6:2012 has been approved by CEN as a EN ISO 1927-6:2012 without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 1927-6:2013

---------------------- Page: 6 ----------------------

SIST EN ISO 1927-6:2013
INTERNATIONAL ISO
STANDARD 1927-6
First edition
2012-12-01
Monolithic (unshaped) refractory
products —
Part 6:
Measurement of physical properties
Produits réfractaires m
...